Selective ensemble extreme learning machine modeling of effluent quality in wastewater treatment plants

Real-time and reliable measurements of the effluent quality are essential to improve operating efficiency and reduce energy consumption for the wastewater treatment process.Due to the low accuracy and unstable performance of the traditional effluent quality measurements,we propose a selective ensemble extreme learning machine modeling method to enhance the effluent quality predictions.Extreme learning machine algorithm is inserted into a selective ensemble frame as the component model since it runs much faster and provides better generalization performance than other popular learning algorithms.Ensemble extreme learning machine models overcome variations in different trials of simulations for single model.Selective ensemble based on genetic algorithm is used to further exclude some bad components from all the available ensembles in order to reduce the computation complexity and improve the generalization performance.The proposed method is verified with the data from an industrial wastewater treatment plant,located in Shenyang,China.Experimental results show that the proposed method has relatively stronger generalization and higher accuracy than partial least square,neural network partial least square,single extreme learning machine and ensemble extreme learning machine model.     

以1,3-二(4-邻羟基苯亚胺次甲基)苯氧基丙烷为载体的铁离子(Ⅲ)电极的研究

以1,3-二(4-邻羟基苯亚胺次甲基)苯氧基丙烷为中性载体制备了PVC膜Fe3+离子选择性电极。该电极对Fe3+呈现出良好的选择性和近Nernst电位响应性能。电极斜率为21mV/dec,线性范围为3.0×10-5～1.0×10-1mol/L,检出限为1.0×10-5mol/L。采用交流阻抗技术研究了电极的响应机理,并将电极作为指示电极初步用于EDTA的电位滴定。     

STUDY ON THE VARIATION MECHANISM OF CARBON CONTENT OF LIQUID IRON IN MELTING GASIFIER

This paper studied the changing principles of carbon content in direct reduction iron (DRI) and liquid iron in the COREX melting gasifier. Under the normal working conditions of experimental equipment, liquid nitrogen was poured into the melting gasifier from its tuyere to cool down quickly. And then seven cross sections were made to study the carburization reaction and its characteristics of the solid iron and the liquid iron, and also the reaction of carbon between the slag and the metal. According to the results, the influences of the thickness of the semi-coke layer and the temperature on the carbon content of liquid iron in the COREX melting gasifier were confirmed.     

Revealing Microstructural,Textural, and Hardness Evolution of Ti–6Al–4V Sheet Cooled From Sub β-Transus Temperature at Different Rates

Metallurgical and Materials Transactions A - A hot-rolled Ti–6Al–4V sheet was annealed at 960 °C (sub β-transus temperature) and then subjected to different coolings [in water...     

镁基复合材料微区力学状态的有限元分析

弹性变形范围内,在采用三维有限元模型分析了颗粒增强Mg基复合材料(PRMMCs)中,颗粒的分布形态对材料微区力学状态的影响。结果表明,在保持颗粒长径比(2:1)和颗粒间距(d)不变的情况下,随着θ的变化,不存在颗粒断裂的危险,材料的主要失效方式为界面脱离和基体开裂。增强体相对夹角θ=15o时的结果优于其它情况,这更有利于充分发挥材料的性能。     

粉末冶金法制备SiC晶须增强MB15镁基复合材料

采用粉末冶金法制备了SiC晶须增强镁基复合材料(SiCW／MB15)试样。通过检测基体显微硬度探讨了SiCW对镁合金时效规律的影响，并借助扫描电镜(SEM)、透射电镜(TEM)和拉伸试验，研究了混粉方式对复合材料室温力学性能、SiCW分布及显微结构的影响。结果表明，MB15及其复合材料的时效硬化曲线上均存在双峰现象；SiCW的加入既提高了MB5的硬度，又加快了其时效速度：混粉方式对晶须分布及SiCW／MB15复合材料的室温力学性能影响很大。     

钼酸盐与其他缓蚀剂协同缓蚀效应的研究

简要介绍了钼酸盐缓蚀剂的缓蚀机理,并对钼酸盐与其他缓蚀剂协同缓蚀效应的研究作了综述。     

改善聚酯装置热媒炉运行状况的几项措施

介绍了聚酯装置的热媒炉在运行过程中多次停炉的原因和存在的问题 ,比如燃料油压力波动、燃料油温度低、含水高、控制系统联锁频繁、热效率下降等 ,通过增设燃料油罐、提高油罐温度、改造增压泵、优化VR -4控制系统以及其它措施 ,大大改善了热媒炉的运行状况     

Data-based adaptive online prediction model for plant-wide production indices

A data-based adaptive online prediction model is proposed for plant-wide production indices based on support vector regression, a general method which we customized specifically to model very large data sets that are generated dynamically and periodically. The proposed model can update its parameters online according to the statistical properties of the training samples. Further, in order to improve the prediction precision, each sample is weighted with a dynamic penalty factor that considers the effect of each sample on the prediction model accuracy. Moreover, a customized procedure is introduced to handle large training sets. After having been convincingly evaluated on benchmark data, effectiveness and performance of our approach for plant-wide production indices is demonstrated using industrial data from an operating ore dressing plant over a range of scale in training data set size. The higher accuracy and shorter computation times than existing methods suggest that it may prove advantageous in actual application to dynamic production processes.     

P(MMA-DBMEA)乳液聚合研究

甲基丙烯酸甲酯 ( MMA)在无皂乳化剂条件下 ,加入少量的功能性单体 N,N一二甲基 ,N-丁基 ,N-甲基丙烯酰氧乙基溴化铵 ( DBMEA) ,合成了稳定的 P( MMA-DBMEA)共聚物乳液 .该共聚物乳胶粒呈现单分散分布。同时用 NMR研究了共聚物 ,并对 P( MMA-DBMEA)聚合物13 C进行了全归属。