单,双向拉伸各性能指标间的相关性研究

采用９种板料进行了单拉及液压胀形（双向拉伸）试验，分别研究了双向拉伸各性能指标间及单、双向伸各性能指标间的相关关系，得到了一系列有意义的结果。     

溶剂抽提偏三甲苯-正辛烷三元体系液-液相平衡的对比分析

在70℃下采用浊点法分别测定了二甲亚砜、N-甲酰吗啉、四甘醇与偏三甲苯-正辛烷三元体系液-液相平衡数据，得到体系的液-液分层曲线和结点数据，并用液-液分层曲线和体系物性（折光指数、密度）相结合的方法对平衡数据进行了分析。结果表明：溶剂的溶解能力的次序为：N-甲酰吗啉＞二甲驱砜＞四甘醇；溶剂的选择性次序为：二甲亚砜＞四甘醇＞N-甲酰吗啉，三种溶剂中二甲亚砜同时具有较高的溶解能力和选择性，较适合萃取偏三甲苯-正辛烷的混合溶液。研究结果可以为溶剂抽提过程相平衡数据库提供基础数据，并为重芳烃抽提的溶剂选择提供参考。     

高效液相色谱法测定止痛养胃软胶囊中延胡索乙素的含量

测定止痛胃软胶囊中延索乙素的含量,可用高效液相色谱法。选用甲醇—磷酸缓冲溶液(40∶60)为流动相,测定波长280nm。结果:延胡索乙素浓度在0.02140～1.37mg/mL范围内,与峰面积线性关系良好,y=(8.390×106)x+7.505×103(r=0.9997)。结论:该法操作简便、快捷、特异性强,可用于控制止痛养胃软胶囊的质量。     

New approach for the preparation of nanoporous polyorganosilicate low‐k films

The distribution of pores and the mechanical properties of materials are the key factors in preparing satisfactory low‐k films. In the present study, a kind of silsesquioxane‐polyethylene glycol (SSQ‐PEG) was synthesized and used as a template to make the distribution of pores more even in the low‐k films. The crosslinking density of films could be adjusted by the sol‐gel of tetramethoxysilane/dimethoxydimethylsilane with various proportions. The porosity of films could also be adjusted with different proportions of pendant PEG chains introduced. A dielectric constant as low as 2.1 had been achieved for nanoporous polyorganosilicate films with good tenacity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1238–1243, 2007     

煤锅炉制粉系统改造总结

阐述中石化九江分公司2台煤锅炉制粉系统若干改造,介绍原煤仓、磨煤机系统、木块分离器、粗粉分离器、制粉管道及锁气器、制粉冷却水系统等改造的成功经验,并对此改造进行分析和评价.     

生物陶瓷内部成孔与贯通方式的研究

多孔羟基磷灰石（HA）陶瓷内部结构满足细胞向内部渗透、迁移、粘附和生长的条件。实验探讨了HA陶瓷内部成孔与孔道连结的机理与技术，采用添加制孔剂和固化纤维2种方法制备系列样品，测算了样品气孔率，并对微观结构进行扫描电镜观察，最终确定可人工调控内部结构的HA陶瓷成孔与贯通技术。     

化学微交联聚氯乙烯的结构和性能

通过氯乙烯/邻苯二甲酸二烯丙酯(VC/DAP)悬浮共聚,合成了含部分凝胶结构的化学微交联PVC树脂,对微交联PVC的玻璃化转变行为、加工性能、消光性能、加热-形变行为和力学性能进行了研究。当DAP用量在0.25%mol以下时,PVC的玻璃化温度变动不大。凝胶含量的增加将导致交联PVC_d~T的光泽度下降,消光性能提高;塑化时间和加工扭矩均增加,加工性能急剧变差;加热变形值下降,最高使用温度提高。凝胶对PVC拉伸性能的影响较为复杂,但压缩永久变形则随凝胶含量的增加而下降,材料的弹性性能逐渐提高。     

高聚合度聚氯乙烯的加工性能

本文对高聚合度聚氯乙烯(H-PVC)的发展及其优异的物理机械性能作了简要介绍;着重分析了H-PVC的加工性能和表征方法,并讨论了分子特性和颗料特性及加工组成、加工条件对加工性能的影响,提出了改进H-PVC加工性能的方法。     

气泡釉的研制

研制了一种从石灰釉中分离出来的缺陷釉—气泡釉。气泡釉由于其特殊的性质,不适用于强度要求高的建陶,一般用于普通的日用瓷或艺术瓷。主要利用长石、高岭土、方解石、白云石和石英等常用原料,通过调整各种原料的用量,改变釉层厚度、烧成制度等方法来寻求最佳的气泡釉效果。     

Electrodeposition of Pd–Ag alloy nanowires on highly oriented pyrolytic graphite

This paper reports findings of an investigation of Pd–Ag alloy nanowires on the step edges of highly oriented pyrolytic graphite (HOPG) by electrochemical deposition at room temperature. Scanning electron microscopy (SEM) images reveal that these alloy nanowires (109–430 nm) are uniform in diameter, and have lengths up to 100–500 μm. The electrodeposition process involves the initial formation of nanowires induced at the step edges of the oxidized HOPG substrate at a very negative potential and subsequent growth at a constant low current density to coalesce the discontinuous nanowires. Alloy nanowires with a 20–25% silver content can be obtained when the ratio of Pd and Ag in the solution is carefully controlled. The SEM images demonstrate that the alloy nanowire arrays are continuous, parallel, ordered, well-aligned and have a narrow distribution of diameters. The Pd–Ag alloy nanowire arrays are promising materials for fabricating hydrogen nanosensors.