定向凝固Al/C复合材料研究

本文首次进行了Al/C(SiC)复合材料定向凝固,研究了复合材料定向凝固过程以及组织形态与凝固速率的关系,获得了纤维束间胞晶和不同间距的树枝晶,发现非润湿系统复合材料定向凝固后性能降低,文中对其机制进行了探讨.     

真空铸造高强度C／Mg复合材料

本文介绍用真空铸造法制造抗拉强度超过１０００ＭＰａ的高强度Ｃ／Ｍｇ复合材料。将Ｔ３００纤维经Ｃ－Ｓｉ－Ｏ梯度涂层处理后单向排布于型腔内，在真空下注入ＺＭ—５合金液，凝固后即得Ｃ／Ｍｇ复合材料零件或试样。试样的抗拉强度在纤维体积分数为０．３５时达１０５０ＭＰａ。本文讨论Ｃ－Ｓｉ－Ｏ梯度涂层对获得高强度复合材料的作用。     

NexGen的Nx586－Pentium的又一个挑战者

本文简单介绍ＮｅｘＧｅｎ公司最新设计出的Ｎｘ５８６ＣＰＵ。它是一种８０×８６兼容的处理器，文中介绍了它的微体系结构，ＲＩＳＣ８６指令等。     

液压随动系统在线监测与故障诊断系统

介绍了集随动系统在线监测与故障诊断于一体的智能系统。利用基于知识的诊断推理技术与神经网络技术相结合的方法构建了随动系统在线故障诊断专家系统，使得神经网络推理与基于符号的知识诊断控制、解释有机地结合起来，取长补短，大大提高了系统的工作效率和诊断可靠性。     

住宅厨房共用排烟系统性能比较

介绍了当地住宅厨房通风设计的发展简况，比较了两种房共用排烟系统的构造，尺寸，性能，造价及能耗，对厨房通风设计和施工提出了建议。     

红外焦平面器件脉冲驱动电路的小型化设计

代表着红外器件发展的主流方向的红外焦平面器件，其正常工作时需要驱动脉冲信号多达十几路，为了使红外焦平面阵列处于最佳工作状态，就必须设计出相应的驱动电路。提出了一种红外焦平面器件驱动电路的设计方法。该电路具有体积小、功率低及灵活性好等特点，为驱动电路以及成像系统的小型化提供了良好的技术基础。     

基于ARX模型的压电智能结构振动预测控制

采用预测控制法对压电智能结构的振动主动控制进行了实验研究，通过实验方法建立了系统的ARX模型，并在此基础上设计了预测控制器对结构进行振动主动控制。实验结果验证了该方法在压电智能结构振动主动控制中的可行性和有效性。     

Magnetic field effects on g-jitter induced flow and solute transport

Numerical modeling and analyses are presented of magnetic damping of g-jitter driven fluid flow and its effect on the solutal striation in a simplified Bridgman-Stockbarger crystal growth system under microgravity. The model development is based on the finite element solution of the momentum, energy and solute transport equations under g-jitter conditions in the presence of an external magnetic field. The numerical model is verified by comparison with analytical solutions obtained for a simple parallel plate channel flow driven by g-jitter in a transverse magnetic field. Simulations are carried out to study the behavior of convective flow and solutal transport induced by the combined g-jitter and magnetohydrodynamic forces. Both the idealized single frequency g-jitter force and the real g-jitter perturbation taken during space flight are considered. Results indicate that an applied magnetic field can effectively damp the velocity caused by g-jitter and help to reduce the time variation of solute redistribution. A stronger applied field is more effective in suppressing the convective flows and hence reducing concentration variation. It is found that g-jitter driven flows have the same oscillation period as the driving force with or without the applied field. However, an applied magnetic field shortens the transient period over which the flow field evolves into a quasi-steady state time harmonic oscillation after g-jitter sets in. The flow intensity increases with an increase in g-jitter magnitude but decreases with an increase in the applied field strength. The reduced convection in the liquid pool by the applied magnetic field results in a reduction of the concentration oscillation. The magnetic field is very useful in suppressing the spiking velocities that are induced by the spikes in the real g-jitter data. The damping effect is more pronounced if the magnetic field is switched on before the onset of g-jitter disturbances.     

计算机辅助设计中浓淡曲线的设计

本文介绍利用Super Frame软件进行色彩浓淡设计的原理、方法和步骤。据此原理和方法,使用C语言设计开发出了应用实例——折线浓淡分布曲线。