High-resolution venography of the brain using magnetic resonance imaging

The purpose of this study was to evaluate a non-flow related magnetic resonance imaging method to visualize small veins independent of arteries in the human brain. A long TE, high-resolution 3D gradient echo MR acquisition was used to highlight venous information. The method is based on the paramagnetic property of deoxyhemoglobin and the resulting phase difference between veins and brain parenchyma at long echo times. The MR magnitude images were masked with a phase mask filter to enhance small structure visibility.. Venous information down to sub-pixel vessel diameters of several hundred microns is visible. Venous data are displayed in an angiographic manner using a minimum intensity projection algorithm. Both superficial veins and deep white matter veins are visible. The method has been successfully applied in volunteers. Preliminary results in patients with cerebral arteriovenous malformations indicate its potential in clinical applications. The proposed method is easy to implement and does not require administration of a contrast agent or application of specially designed rf pulses to highlight the veins. Rather it exploits the intrinsic magnetic properties (BOLD-effect) and the prolonged T ^_2* of venous blood. The method may be of diagnostic potential in the assessment of arteriovenous malformations or other vascular venous lesions. © 1998 Elsevier Science B.V. All rights reserved.     

Cassini Titan Radar Mapper

The Cassini Titan Radar Mapper is a multimode radar instrument designed to probe the optically inaccessible surface of Titan, Saturn's largest moon. The instrument is to be included in the payload of the Cassini Saturn Mission, scheduled for launch in 1995. The individual modes of Cassini Radar Mapper will allow topographic mapping and surface imaging at few hundred meters resolution. The requirements that lay behind the design are briefly discussed, and the configuration and capability of the instrument are described. The present limited knowledge of Titan's surface and the measurement requirements imposed on the radar instrument are addressed. Also discussed are the Cassini mission and the projected orbits, which imposed another set of design constraints that led to the multitude of modes and to an unconventional antenna configuration. The antenna configuration and the different radar modes are described     

Subsurface radar signal deconvolution

We present two methods of signal deconvolution for systems whose impulse response (wavelet function) can be explicitly determined, and where the goal is to locate short impulses in the presence of strong, reverberation-like interferences.The first method, which we call algebraic deconvolution, differs from other known techniques in two ways: first of all, explicit use of the wavelet function provides more powerful a priori knowledge than the autocorrelation or the power spectrum. Secondly, this method permits to flexibly trade off noise versus resolution.In the second method presented here, we use an analytical model (synthetic wavelet) of the system impulse response to determine an inverse filter.These methods have been developed for video pulse radar signals, and encouraging early results have been obtained.     

Lone‐Pair‐Induced Covalency as the Cause of Temperature‐ and Field‐Induced Instabilities in Bismuth Sodium Titanate

Bismuth sodium titanate (BNT)‐derived materials have seen a flurry of research interest in recent years because of the existence of extended strain under applied electric fields, surpassing that of lead zirconate titanate (PZT), the most commonly used piezoelectric. The underlying physical and chemical mechanisms responsible for such extraordinary strain levels in BNT are still poorly understood, as is the nature of the successive phase transitions. A comprehensive explanation is proposed here, combining the short‐range chemical and structural sensitivity of in situ Raman spectroscopy (under an applied electric field and temperature) with macroscopic electrical measurements. The results presented clarify the causes for the extended strain, as well as the peculiar temperature‐dependent properties encountered in this system. The underlying cause is determined to be mediated by the complex‐like bonding of the octahedra at the center of the perovskite: a loss of hybridization of the 6s² bismuth lone pair interacting with the oxygen p‐orbitals occurs, which triggers both the field‐induced phase transition and the loss of macroscopic ferroelectric order at the depolarization temperature.     

Influence of anisotropic strain on excitonic transitions in a-plane GaN films

Hexagonal a-plane GaN films with -orientation were grown by metalorganic vapour phase epitaxy on r-plane sapphire substrates. Spectroscopic ellipsometry in the photon energy range from 1.2 up to 5 eV was applied in order to determine the ordinary and extraordinary complex dielectric function of GaN. A distinct optical anisotropy is found over the whole energy range which is emphasized by reflectance anisotropy studies. The polarization dependent shift of the absorption edges is confirmed by photoreflectance measurements and compared to band structure calculations for which the in-plane strain is taken into account.     

The dependence of electromagnetic energy absorption upon human-headmodeling at 1800 MHz

The authors of a previously published paper on the dependence of electromagnetic (EM) energy absorption concluded that homogeneous modeling of the human head is suited for assessing the spatial-peak absorption for transmitters operating at 900 MHz or below. Additional studies became necessary for the frequency bands utilized by new mobile communications systems (i.e., 1.5 and 2.5 GHz) since some peripheral tissue layers have a thickness of the range of λ/4-λ/2. The results of the simulations combined with worst-case considerations confirmed the anticipated and more complex relationship between absorption and anatomical details at these higher frequencies. Nevertheless, a homogeneous representation of the head is suited for assessing the maximum specific absorption rate (SAR) in the head of the user of mobile telecommunication equipment (MTE) if the appropriate dielectric parameters are chosen     

A digitally temperature-compensated crystal oscillator

The base frequency of oscillators used in the Global System for Mobile Communication (GSM) network or Global Positioning System (GPS) receiver applications needs to be very stable with respect to temperature and supply-voltage variations. One approach to obtain extremely good frequency stability is the use of oven-stabilized crystal oscillators. With this kind of oscillator, a frequency stability versus temperature of a few ppb versus the standard temperature range can be achieved. In this paper, a digitally compensated crystal oscillator is described. The system provides a frequency stability of (Δf)/f<1.5 ppm for a temperature range of -40°C to 90°C compared to about ±20 ppm for a noncompensated crystal. The core of the system is an application-specified integrated circuit (ASIC) fabricated in a standard 0.8-μm CMOS process. The power consumption for the oscillator running at 13 MHz is 100 mW. The final device equipped with the ASIC, crystal blank, and a few external components fits into a 14×9×3 mm³ package     

Review on materials, microsensors, systems and devices forhigh-temperature and harsh-environment applications

The considerable investment in silicon technology has rarely addressed device use in harsh environments such as high temperatures, aggressive media, and radiation exposure. A clear future requirement is to save weight, volume, and reduce costs in “unfriendly” environments like high temperatures. This can be achieved either by cooling systems or by electronic microsystem components suited to withstand high temperatures. The current status of cooling systems, harsh-environment sensors, and microsystems in view of markets, realized devices, material, properties, process maturity, and packaging technologies are reviewed. Possible semiconductor candidates for high-temperature applications are discussed. The main obstacles for the future of high-temperature and harsh-environment microsystems is highlighted     

Parallel Adder Design with Reduced Circuit Complexity Using Resonant Tunneling Transistors and Threshold Logic

Quantum-effect devices utilizing resonant tunneling are promising candidates for future nano-scale integration. Originating from the technological progress of semiconductor technology, circuit architectures with reduced complexity are investigated by exploiting the negative-differential resistance of resonant tunneling devices. In this paper a resonant tunneling device threshold logic family based on the Monostable-Bistable Transition Logic Element (MOBILE) is proposed and applied to different parallel adder designs, such as ripple carry and binary carry lookahead adders. The basic device is a resonant tunneling transistor (RTT) composed of a resonant tunneling diode monolithically integrated on the drain contact layer of a heterostructure field effect transistor. On the circuit level the key components are a programmable NAND/NOR logic gate, threshold logic gates, and parallel counters. The special properties of MOBILE logic gates are considered by a bit-level pipelined circuit style. Experimental results are presented for the NAND/NOR logic gate.     

Influence of Atmospheric Path Delay on the Absolute Geolocation Accuracy of TerraSAR-X High-Resolution Products

Two coupled investigations of TerraSAR-X (TSX) high-resolution data are described in this paper: geometric validation, and estimation of the tropospheric path delay using measurements of corner reflectors (CRs) placed at different altitudes but nearly identical ranges. The CRs were placed within Alpine and valley sites in Switzerland, where terrain diversity provides ideal territory for geometric validation studies. Geometric validation was conducted using slant-range complex products from the spotlight and stripmap (SM) modes in ascending and descending configurations. Based on the delivered product annotations, the CR image positions were predicted, and these predictions were compared to their measured image positions. To isolate path delays caused by the atmosphere, six TSX SM scenes $(sim!!hbox{35} times hbox{50} hbox{km})$ were examined containing four identical CRs with the same ranges and an altitude difference of $sim$ 3000 m. The CR arrangement made it possible to verify the annotated TSX atmospheric path delay by comparing the predicted slant range with the slant range obtained by measuring the reflector image coordinates. Range differences between the high- and low-altitude reflectors helped to quantify small variations in the path delay. Both SM and spotlight TSX products were verified to meet the specified accuracy requirements, even for scenes with extreme terrain variations, in spite of the simplicity of the atmospheric model currently integrated into the processor. Small potential improvements of the geolocation accuracy through the implementation of more comprehensive atmospheric modeling were demonstrated.