Fatigue of viscoelastic polymers: 2. Fractography

The results of a fractographic study of fatigue failure in viscoelastic polymers is presented. Tests were conducted on a spherulitic low-density polyethylene in reversed loading using non-symmetrical deformation conditions. The microfractographic features have been found to depend on the deformation programme, the temperature of the test and the position on the fracture surface. The latter has been related to the different stages of growth revealed by plotting crack-growth propagation data. As well as interspherulitic fracture, other mechanisms that are sometimes prevalent involve cold-drawing, (fibrillation), and/or lamellar reorientation. The appearance of fatigue fracture surfaces of a non-spherulitic low-density polyethylene, a high-density polyethylene and a plasticized poly(vinyl chloride) corroborate the structural interpretations proposed to account for the observations with the spherulitic low-density polyethylene.     

Metabolism of lysophosphatidylcholine by swine platelets

Incubation of intact platelets from Sinclair(S-1) miniature swine with³²P-labeled lysophosphatidylcholine (lyso PC) indicated the presence of an active lysophospholipase with a pH optimum of 8.0 for hydrolysis of the substrate. However, lyso PC was incorporated into the membrane phosphatidylcholines by the acyltransferase pathway upon addition of ATP, Mg⁺⁺ and CoA to the platelet suspension. These results suggest that intact platelets are able to resist the cytotoxic effects of lyso PC in plasma, and the phospholipids in platelet membranes are not readily affected by the lipid environment of the plasma. The acyltransfer reaction apparently is saturated with endogenous free fatty acids since arachidonic acid added exogenously did not further enhance the incorporation activity. Neither the acyltransferase nor the lysophospholipase activity was affected by Ca⁺⁺, but divalent metal ions such as Zn⁺⁺ inhibited the lysophospholipase activity. Cholesterol but not cholesteryl esters elicited a biphasic effect on both enzymes, stimulating at low concentration but inhibiting at a cholesterol to lyso PC ratio greater than 1. Serum albumin inhibited the lysophospholipase but gave a small biphasic effect to the acyltransferase.     

Using Electrical Capacitance Tomography to Investigate Gas Solid Contacting

An ECT system has been shown to be useful in observing differences in particle behaviour in a bubbling fluidised bed. An image analysis technique is further described that utilises the construction of solids concentration profiles at three key values, x = 0.2, x = 0.5 and x = 0.8, which have been identified as important solids concentrations in a new Bubble Structure Model. Significant differences in the bubble structure are shown to result when the concentration of fine particles is slightly increased in a bubbling fluidised bed. Changes of this type would seriously alter the gas solid contact efficiency in the fluidised bed, which would significantly influence selectivity of in‐bed catalytic reactions and gas residence time.     

Development and evaluation of terminally epoxidized triglycerides for coatings applications

Epoxidized 10-undecenoic acid triglyceride, an experimental seed oil derivative that has a terminal epoxy group on each of the three acyl glyceride segments, has been found to have good reactivity with amine curatives and allows room temperature cures to be obtained. Coatings based on epoxidized 10-undercenoic acid triglyceride have also shown excellent UV stability. As an example, coatings samples placed in a QUVA chamber exhibit no loss in gloss after 3000 hr of a cycled exposure to high intensity UV lamps and moisture at temperatures of 50–60°C. In comparison, coatings based on standard liquid epoxy resins (LERs) and commercially available hydrogenated LERs lose gloss due to chalking/decomposition within 200–800 hr. Presented at the 81 st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

Structure development in melt‐spinning syndiotactic polystyrene and comparison to atactic polystyrene

Syndiotactic polystyrene (s‐PS) and atactic polystyrene (a‐PS) were melt‐spun into filaments. The s‐PS filaments exhibited increasing amounts of crystallinity and orientation with increasing drawdown ratio and spinline stress. The a‐PS filaments were amorphous but exhibited birefringence. The birefringence and Hermans orientation factors for a‐PS were proportional to this spinline stress. In ice water and at low drawdown ratios, the s‐PS is glassy or mesomorphic. At higher drawdown ratios and spinline stresses, it crystallized. The crystalline form was the zigzag TTTT hexagonal α‐form. The birefringence and orientation factors of the s‐PS filaments were higher than those of the a‐PS filaments and the difference of the birefringence increased with increasing spinline stress. Mechanical testing results showed that the Young's modulus and tensile strength generally increased with increasing spinline drawdown ratio for both a‐PS and s‐PS filaments. The elongation to break was enhanced for both materials by increased chain orientation. Polym. Eng. Sci. 44:2141–2147, 2004. © 2004 Society of Plastics Engineers.     

Nanoporous artificial proboscis for probing minute amount of liquids

We describe a method of fabrication of nanoporous flexible probes which work as artificial proboscises. The challenge of making probes with fast absorption rates and good retention capacity was addressed theoretically and experimentally. This work shows that the probe should possess two levels of pore hierarchy: nanopores are needed to enhance the capillary action and micrometer pores are required to speed up fluid transport. The model of controlled fluid absorption was verified in experiments. We also demonstrated that the artificial proboscises can be remotely controlled by electric or magnetic fields. Using an artificial proboscis, one can approach a drop of hazardous liquid, absorb it and safely deliver it to an analytical device. With these materials, the paradigm of a stationary microfluidic platform can be shifted to the flexible structures that would allow one to pack multiple microfluidic sensors into a single fiber.     

Influence of Polydimethylsiloxane on the Oxygen Concentration of Oils at Various Temperatures

The effect of temperature on the oil oxygen concentration, tested in both soybean and olive oils with no added polydimethylsiloxane (PDMS), showed that the oxygen concentration increased with temperature to approximately 100 °C. Above 100 °C, the oxygen concentration abruptly decreased. This change was attributed to the balance between the rates of oxygen uptake and consumption by oil oxidation, which favored oxygen consumption over uptake at temperatures above 100 °C. The addition of 100 ppb PDMS to soybean oil, enough to form a continuous layer over the surface of the oil, reduced the oxygen concentration when compared to a soybean oil control containing no added PDMS at temperatures ranging from 93 to 180 °C; thus suggesting an oxygen barrier effect of PDMS. The accumulation of PDMS at the air–oil interface in soybean oil held at 180 °C was determined by comparing the oil’s internal temperature and the apparent surface temperature. A decrease in the apparent surface temperature while the oil was held at a constant internal temperature was attributed to a change in the emissivity of the surface as a consequence of the accumulation of PDMS in the air–oil interface. The presence of PDMS at the air–oil interface was confirmed for 100 ppm of PDMS, a concentration greater than the concentration necessary to form a monolayer of PDMS on the oil surface.     

Photocatalytic study of polymorphic titania synthesized by ambient condition sol process

Nanocrystalline titania of different phases were produced by ambient condition sol process with phase control originating from alterations in experimental variables. The produced titania photocatalysts were characterized by use of x-ray diffraction, BET surface area, transmission electron microscopy and related to methyl orange degradation. The results showed that the photocatalytic activity of brookite and anatase phase titania samples to be greater than that of Degussa P-25 and rutile phase titania sample. In addition, brookite, due to surface area considerations, appears to be the most photocatalytically active phase of titania.     

A basic experimental study of sandwich injection molding with sequential injection

An experimental study of sandwich injection molding is reported which involves sequential injection of polymer melts with differing melt viscosity into a mold. In isothermal injection molding the relative viscosity of the two melts is the primary variable determining the phase distribution in the mold. Generally the most uniform skin-core structure occurs when the second melt entering the mold has a slightly higher viscosity than the first melt injected. Large viscosity inequalities lead to nonuniform skin thicknesses. The influence of blowing agents and non-uniform temperature fields on the extent of encapsulation is described. Temperature fields are very important especially if the first polymer melt injected has a greater activation energy of viscous flow (or a greater temperature dependence of the viscosity function).