Effect of H2O Vapor on the Internal Friction of Binary Alkali Silicate Glasses

Internal friction and shear modulus of Na, K, and Li disiticate glasses were measured by a torsional pendulum as a function of H₂O vapor treatment at T=300°C. H₂O produced changes in the acoustic spectra (between—100° and 400°C and f=0.5 Hz) similar to the mixed-alkali effect which appears upon introduction of a second alkali to a single-alkali glass. An Na₂O·2SiO₂ glass free from the common nonbridging oxygen relaxation was produced .     

The ultra-low friction of the articular surface is pH-dependent and is built on a hydrophobic underlay including a hypothesis on joint lubrication mechanism

In this study, the influence of pH on interfacial energy distributed over the phospholipids-bilayer surface model and the effect of hydrophobicity on coefficient of friction (f) were investigated by using microelectrophoresis. An important clinical implication of deficiency in hydrophobicity is the loss of phospholipids that is readily observed in osteoarthritis joints. This paper establishes the influence of pH on interfacial energy upon an increase f, which might be associated with a decrease of hydrophobicity of the articular surface.     

Pythagorean Dombi fuzzy aggregation operators with application in multicriteria decision-making

A Pythagorean fuzzy set, an extension of intuitionistic fuzzy sets, is very helpful in representing vague information that occurs in real world scenarios. The Dombi operators with operational parameters, have excellent flexibility. Due to the flexible nature of these Dombi operational parameters, this research paper introduces some new aggregation operators under Pythagorean fuzzy environment, including Pythagorean Dombi fuzzy weighted arithmetic averaging (PDFWAA) operator, Pythagorean Dombi fuzzy weighted geometric averaging (PDFWGA) operator, Pythagorean Dombi fuzzy ordered weighted arithmetic averaging operator and Pythagorean Dombi fuzzy ordered weighted geometric averaging operator. Further, this paper presents several advantageous characteristics, including idempotency, monotonicity, boundedness, reducibility and commutativity of preceding operators. By utilizing PDFWAA and PDFWGA operators, this article describes a multicriteria decision-making (MCDM) technique for solving MCDM problems. Finally, a numerical example related to selection of a leading textile industry is presented to illustrate the applicability of our proposed technique.     

Distribution of chiral PCBs in selected tissues in the laboratory rat

The enantiomeric enrichment of polychlorinated biphenyl (PCB) atropisomers has been reported in both wildlife and in humans. The biological processes causing this enrichment are only poorly investigated, a fact that limits the use of enantiomeric fractions (EFs) as a tool to study various processes of environmental relevance. To further understand these enantioselective processes, this study investigates the tissue distribution and EFs of some PCB atropisomers after administration of PCB mixtures to immature male Sprague-Dawley rats. The mixtures selected for this study, Aroclor 1254 and an environmental mixture extracted from Chlorofen-contaminated soil, are qualitatively different and are known to induce different groups of hepatic enzymes. Animals were sacrificed 6 days after dosing, PCBs were extracted, and, whenever possible, the EFs of PCBs 84, 91, 95, 149, 174, and 176 were determined by chiral gas chromatography. The EFs of PCB 95 (adipose tissue, liver, and skin) and PCB 149 (adipose tissue, liver, skin, and blood) in tissues from Aroclor 1254-treated animals differed significantly from EFs in the Aroclor standard, while only EFs of PCB 95 (blood) and PCB 174 (adipose tissue) in tissues from soil-extract-treated animals were different from those of the Chlorofen soil extract. PCB 149 in tissues from soil-extract-treated animals underwent no statistically significant enantiomeric enrichment. These differences in the EFs clearly suggest that the enantioselective enrichment of PCB atropisomers may correlate with exposure history, and with the induction of hepatic enzymes, and that EFs may be useful chemical markers of physiologic and biochemical changes following exposure to PCBs.     

Synthesis and characterization of core/shell structured nanophosphors CePO_4:Tb@LaPO_4 by solvothermal method

Core/shell structured CePO4:Tb(III) @LaPO4 and CePO4:Tb(III) were successfully synthesized in tris(2-ethylhexyl) phosphate(TEHP) and diethylene glycol(DEG) solvents for comparison of the two techniques in open air and closed reaction vessel.Morphology and crystal structure of the core/shell nanophosphors were determined by using X-ray diffraction(XRD) and transmission electron microscopy(TEM) ,which showed that nanophosphors had diameter of about 5-10 nm with the monoclinic monazite phase.The nanophosphors ...     

Effect of microscopic damage events on static and ballistic impact strength of triaxial braid composites

The reliability of impact simulations for aircraft components made with triaxial braided carbon fiber composites is currently limited by inadequate material property data and lack of validated material models for analysis. Methods to characterize the material properties used in the analytical models from a systematically obtained set of test data are also lacking. A macroscopic finite element based analytical model to analyze the impact response of these materials has been developed. The stiffness and strength properties utilized in the material model are obtained from a set of quasi-static in-plane tension, compression and shear coupon level tests. Full-field optical strain measurement techniques are applied in the testing, and the results are used to help in characterizing the model. The unit cell of the braided composite is modeled as a series of shell elements, where each element is modeled as a laminated composite. The braided architecture can thus be approximated within the analytical model. The transient dynamic finite element code LS-DYNA is utilized to conduct the finite element simulations, and an internal LS-DYNA constitutive model is utilized in the analysis. Methods to obtain the stiffness and strength properties required by the constitutive model from the available test data are developed. Simulations of quasi-static coupon tests and impact tests of a represented braided composite are conducted. Overall, the developed method shows promise, but improvements that are needed in test and analysis methods for better predictive capability are examined.     

基于加速度响应连续小波变换的线性时变结构瞬时频率识别

推导了函数积分运算的连续小波变换计算方法。借助此法,假设线性时变结构的质量系数为时不变常数,或者其随时间变化的规律已被经验掌握,仅利用线性时变结构自由振动的加速度响应信号,就可以计算出速度响应和位移响应信号的连续小波变换值。将一小段时刻点的线性代数方程组构造成最小二乘问题,求解最小二乘解识别出结构的时变阻尼和时变刚度,从而确定时变结构的瞬时频率。通过对5层剪切梁楼房模型和3自由度密集模态时变结构瞬时频率的识别,验证了识别方法的正确性、有效性和抗噪声能力.     

Optimal just-in-time schedules for flexible transfer lines

Flexible transfer lines or mixed-model assembly lines are capable of diversified small-lot production due to negligible switch-over costs. With these lines, it is possible to implement just-in-time (JIT) production, which involves producing only the necessary parts in the necessary quantities at the necessary times. The problem of sequencing flexible transfer lines according to the JIT philosophy can be formulated as a nonlinear integer programming problem. Heuristic algorithms to solve the problem have appeared in the literature. In this paper, we show that the problem can be explicitly reduced to an assignment problem. Thus, we provide an efficient algorithm for an optimal solution to the JIT sequencing problem.This research is supported in part by NSERC grants A4619 and OPG0105675, General Motors of Canada, and The Manufacturing Research Corporation of Ontario. Helpful comments from Kathy Stecke, Ram Rachamadugu, the referees, and the Associate Editor are gratefully acknowledged.