Performance analysis of channel estimation for OFDM systems with residual timing offset

The authors present an analysis of the effect of timing offset on channel estimation for comb-type pilot-aided orthogonal frequency division multiplexing (OFDM) systems. Residual timing offset does not negatively affect the channel estimation of the pilot subcarrier, but does corrupt the channel information obtained via interpolation. This paper provides the mean square error (MSE) channel estimation performance when a linear interpolation technique is used in a comb-type pilot-aided OFDM system. Analysis shows that the performance degradation of the channel estimator due to imperfect frame synchronization is dependent on the frequency correlation of the channels and the amount of timing offset     

Vacuum-processed polyethylene as a dielectric for low operating voltage organic field effect transistors

We report on the fabrication and performance of vacuum-processed organic field effect transistors utilizing evaporated low-density polyethylene (LD-PE) as a dielectric layer. With C₆₀ as the organic semiconductor, we demonstrate low operating voltage transistors with field effect mobilities in excess of 4 cm²/Vs. Devices with pentacene showed a mobility of 0.16 cm²/Vs. Devices using tyrian Purple as semiconductor show low-voltage ambipolar operation with equal electron and hole mobilities of ～0.3 cm²/Vs. These devices demonstrate low hysteresis and operational stability over at least several months. Grazing-angle infrared spectroscopy of evaporated thin films shows that the structure of the polyethylene is similar to solution-cast films. We report also on the morphological and dielectric properties of these films. Our experiments demonstrate that polyethylene is a stable dielectric supporting both hole and electron channels.     

Multiple feedback algorithm for RFID MAC protocols

This letter introduces a new tree-based anti-collision scheme using multiple feedbacks for uplink tag random access in a single-cell scenario. We examine MAC efficiency improvements that result from the proposed scheme in terms of uplink (UL) throughput for emerging radio frequency identification (RFID) networks, and compare it with the conventional tree based RFID MAC in ISO 18000-6 Type B standard.     

A generalization of the octonion Fourier transform to 3-D octonion-valued signals: properties and possible applications to 3-D LTI partial differential systems

Multidimensional Systems and Signal Processing - The paper is devoted to the development of the octonion Fourier transform (OFT) theory initiated in 2011 in articles by Hahn and Snopek. It is also...     

Room-Temperature-Processable Highly Reliable Resistive Switching Memory with Reconfigurability for Neuromorphic Computing and Ultrasonic Tissue Classification

Reversible metal-filamentary mechanism has been widely investigated to design an analog resistive switching memory (RSM) for neuromorphic hardware-implementation. However, uncontrollable filament-formation, inducing its reliability issues, has been a fundamental challenge. Here, an analog RSM with 3D ion transport channels that can provide unprecedentedly high reliability and robustness is demonstrated. This architecture is realized by a laser-assisted photo-thermochemical process, compatible with the back-end-of-line process and even applicable to a flexible format. These superior characteristics also lead to the proposal of a practical adaptive learning rule for hardware neural networks that can significantly simplify the voltage pulse application methodology even with high computing accuracy. A neural network, which can perform the biological tissue classification task using the ultrasound signals, is designed, and the simulation results confirm that this practical adaptive learning rule is efficient enough to classify these weak and complicated signals with high accuracy (97%). Furthermore, the proposed RSM can work as a diffusive-memristor at the opposite voltage polarity, exhibiting extremely stable threshold switching characteristics. In this mode, several crucial operations in biological nervous systems, such as Ca²⁺ dynamics and nonlinear integrate-and-fire functions of neurons, are successfully emulated. This reconfigurability is also exceedingly beneficial for decreasing the complexity of systems—requiring both drift- and diffusive-memristors.     

The Optimal Spectrum Sensing Time for Maximizing Throughput of 802.11-Based MAC Protocol for Cognitive Radio Networks Under Unsaturated Traffic Conditions

Cognitive radio has attracted considerable attention as an enabling technology for addressing the problem of radio frequency shortages. In cognitive radio networks (CRNs), secondary users (SUs) are allowed to opportunistically utilize the licensed spectrum bands of primary users (PUs) when these bands are temporarily unused. Thus, SUs should monitor the licensed spectrum bands to detect any PU signal. According to the sensing outcomes, SUs should vacate the spectrum bands or may use them. Generally, the spectrum sensing accuracy depends on the sensing time which influences the overall throughput of SUs. That is, there is a fundamental tradeoff between the spectrum sensing time and the achievable throughput of SUs. To determine the optimal sensing time and improve the throughput of SUs, considerable efforts have been expended under the saturated traffic and ideal channel assumptions. However, these assumptions are hardly valid in practical CRNs. In this paper, we provide the framework of an 802.11-based medium access control for CRNs, and we analyze this framework to find the optimal spectrum sensing time under the saturated and unsaturated traffic condition. Through simulation, the proposed analytic model is verified and the fundamental problem of the sensing-throughput tradeoff for CRNs is investigated.     

Interactive plant simulation modeling for developing an operator training system in a natural gas pressure-regulating station

This study proposes a method of interactive plant simulation modeling which delivers the online simulated results to the field operators and induces them to take proper actions in the case of pre-identified accident scenarios in a chemical plant. The developed model integrates the real-time process dynamic simulation with 3DCFD accident simulation in a designed interface using object linking and embedding technology so that it can convey to trainees the online information of the accident which is not available in existing operator training systems. The model encompasses the whole process of data transfer till the end of the training at which a trainee operates an emergency shutdown system in a programmed model. In this work, an overall scenario is simulated which is from an abnormal increase in the main valve discharge (second) pressure due to valve malfunction to accidental gas release through the crack of a pressure recorder, and the magnitude of the accident with respect to the lead time of each trainee’s emergency response is analyzed. The model can improve the effectiveness of the operator training system through interactively linking the trainee actions with the simulation model resulting in different accident scenarios with respect to each trainee’s competence when facing an accident.     

试样薄化导致的Cu－Al贝氏体／马氏体组织变化

加热到１１７３Ｋ的Ｃｕ－２５ａｔ；％Ａｌ合金块状试样经７２３Ｋ６０Ｓ等温淬火后其组织由片状的“羽毛状贝氏体（９Ｒ结构）和β＿１＇马氏体（１８Ｒ结构）组成。当试样被离子束轰去进一步薄化后，在足够薄的区域内生成了许多２Ｈ结构的薄片马氏体。初步分析认为该薄片马氏体形成的原因是由于贝氏体生成时在试样内留下了高的应力场，当试样薄化到一临界厚度以下时，试样区的三维约束条件松弛使试样内的应力场触发了薄片马氏体的生成。这些薄片马氏体是通过位于贝氏体界面上位错的重新启动而长大的。     

Diversity reception of 16STAR-QAM in frequency-selective Ricianfading

Bit error rate (BER) performance of differential 16STAR-QAM in frequency-selective Rician fading channels with diversity reception is theoretically analysed for three different types of delay profiles: double spike, one-sided exponential and Gaussian profiles. The effect of time delay between line-of-sight (LOS) and multipath components is also included in the analysis, and is shown to degrade the system performance significantly     

An adaptive algorithm for separating and tracking multipledirectional sources in linear arrays

An algorithm for spatially filtering out, enhancing, and tracking individual directional sources in an adaptive array is proposed and investigated. In this algorithm, the sources are separated by using an adaptive beamformer whose outputs are processed by using the LMS algorithm to track distinct sources individually. From the LMS weights used, the source locations can be estimated. Whenever significant changes in these are detected, the beamformer is updated so that its outputs will be due to different sources in the steady state. With this algorithm, the problems of look-direction errors in look-direction constrained arrays and of large signal power in power inversion arrays are eliminated, and the enhancement of multiple moving sources becomes a natural process. Furthermore, because the sources are individually tracked and the beamformer is only updated occasionally, the algorithm possesses fast tracking behavior, and its implementation complexity is comparable to that of beamformer-based adaptive arrays using the LMS algorithm