Preparation,characterization and wear behaviour of TiNx-coated cermets obtained by plasma-enhanced chemical vapour deposition

Commercial cermet inserts were coated with titanium nitride by plasma-enhanced chemical vapour deposition (PECVD) using a pulsed direct current (d.c.) glow discharge. The influence of the coating parameters on the deposition rate, on the layer composition, on the layer-substrate interface, on the structure and on the microhardness of the layers was investigated for deposition temperatures in the range 500–700 °C. The adhesive strengths, and some mechanical properties, of the coated cermets were characterized by scratch tests, by friction wear investigations and by measurement of the transverse rupture strength. The wear behaviour was examined in the cutting tests. It was found that TiN _x -coatings deposited with a sufficiently high deposition rate and plasma power density have a low oxygen and chlorine content and that they are nearly stoichiometric. The layers usually have a columnar structure with a 200 texture. A granular, equiaxed structure was observed within a small range of deposition conditions. In interrupted and continuous turning tests with steel and grey cast iron, a high cutting performance of the coated inserts, which depended on the coating thickness and on the deposition temperature, was achieved.     

3D-Druck für Hochvakuumanwendungen

To mark our anniversary, we are presenting articles that have been particularly appreciated by readers of our online edition once again in print. Here: 3D-Printing for High Vacuum Applications 3D printing technology has made the leap from a home-based private practice to industrial manufacturing. Due to the increasing reliability of printers and increasing material diversity, especially in the metal sector, double-digit percentage growth rates are possible in the coming years. This thesis deals with the manufacture of parts made by 3D printing for high vacuum application. Different components are printed and examined for their vacuum compatibility. As shown furthermore, conventionally made standard components can be vacuum sealed to printed parts, which enables cost-effective production of more complex components, such as e.g. a vacuum chamber allows. In addition, functional components can already be realized in the manufacturing process. The integration of a system of flow channels directly into the wall of a chamber is just one example. Thus, such a chamber can be heated during evacuation and effectively cool in later operation.     

The role of occupational medicine in the development of current and future legal documents on women's work safety and women's health

The article covers legal documents of general and specific measures for women's work safety and health care. Legal basis for work safety and health care in women of childbearing age in this country corresponds with international legal norms. Preservation of social and biologic prosperity for women in this country should be guaranteed by "On protection of maternity" law including medical, social, economic and legal measures.     

Mechanisms of neuronal calcium homeostasis destabilization caused by hyperstimulation of glutamate receptors

The present paper summarizes the data obtained in studying the mechanisms of glutamate-induced deterioration of neuronal Ca2+ homeostasis. In the cultured mammalian central neurons, a short-term (< 1 min) glutamate (GLU, 100 mu) challenge is known to induce a readily reversible (transient) neuronal [Ca2+]i increase. In contrast, a long-term (15-30 min) GLU exposure leads to the appearance of high [Ca2+]i plateau or to the partial recovery of the increased [Ca2+]i. Experiments show that impaired [Ca2+]i recovery in the postglutamate period cannot be explained by the increased [Ca2+]i permeability of the neuronal membrane, as earlier considered. Moreover, a sustained elevation of [Ca2+]i during and after chronic GLU application is associated with a progressive decrease in Ca2+ permeability. The major cause of GLU-induced Ca2+ overload is the mitochondrial depolarization resulted from excessive Ca2+ influx into the mitochondria, the generation of free radicals and the opening of a "giant pore" in the inner mitochondrial membrane. This in turn suppresses both ATP synthesis and Ca2+ electrophoretic uptake into the mitochondrial matrix. In combination with [Ca2+]i-dependent acidification, this leads to the suppression of Ca2+ release from the cell via Na+/Ca2+ exchanger and Ca2+/H+ pump of the neuronal membrane. Therefore, [Ca2+]i recovery following a long-term GLU treatment becomes strongly or even irreversibly compromised.     

Upper limit ofTc for the copper oxides

The value of the critical temperature of the cuprates correlates with the doping level and is affected by the interplay of two competing factors: (1) the increase in carrier concentration, and (2) the pair-breaking effect of magnetic impurities. An analysis of the temperature dependence of the critical field leads to the conclusion that magnetic impurities are present even in a sample with the maximum observed value ofT _c.A new parameter, intrinsicT _c (T _cintr), which is its value in the absence of magnetic impurities, is introduced. The maximum value ofT _cintr, which corresponds to the maximum doping level, appears to be similar for different cuprates and to be equal to 160–170 K. This is the upper limit ofT _c in the cuprates.     

Relating the X-band opacity of a tropical tree canopy to sapflow, rain interception and dew formation

During summer and autumn 2007, a 11 GHz microwave radiometer was deployed in an experimental tree plantation in Sardinilla, Panama. The opacity of the tree canopy was derived from incoming brightness temperatures received on the ground. A collocated eddy-covariance flux tower measured water vapor fluxes and meteorological variables above the canopy. In addition, xylem sapflow of trees was measured within the flux tower footprint. We observed considerable diurnal differences between measured canopy opacities and modeled theoretical opacities that were closely linked to xylem sapflow. It is speculated that dielectric changes in the leaves induced by the sapflow are causing the observed diurnal changes. In addition, canopy intercepted rain and dew formation also modulated the diurnal opacity cycle. With an enhanced canopy opacity model accounting for water deposited on the leaves, we quantified the influence of canopy stored water (i.e. intercepted water and dew) on the opacity. A time series of dew formation and rain interception was directly monitored during a period of two weeks. We found that during light rainfall up to 60% of the rain amount is intercepted by the canopy whereas during periods of intense rainfall only 4% were intercepted. On average, 0.17 mm of dew was formed during the night. Dew evaporation contributed 5% to the total water vapor flux measured above the canopy.     

Multi-Modal Dialog Scene Detection Using Hidden Markov Models for Content-Based Multimedia Indexing

A class of audio-visual data (fiction entertainment: movies, TV series) is segmented into scenes, which contain dialogs, using a novel hidden Markov model-based (HMM) method. Each shot is classified using both audio track (via classification of speech, silence and music) and visual content (face and location information). The result of this shot-based classification is an audio-visual token to be used by the HMM state diagram to achieve scene analysis. After simulations with circular and left-to-right HMM topologies, it is observed that both are performing very good with multi-modal inputs. Moreover, for circular topology, the comparisons between different training and observation sets show that audio and face information together gives the most consistent results among different observation sets.     

Design, fabrication, and testing of a bistable electromagneticallyactuated microvalve

A bistable electromagnetically actuated microvalve was designed, processed, and tested. The valve was designed to control a water flow of 0.05-0.5 μs from a reservoir at a pressure of 1-2000 Pa. The two valve components were fabricated in silicon, the upper piece comprises an electroplated gold coil, and the lower piece is an Ni/Fe alloy beam. The bistable capability was achieved by balancing the elastic forces on the beam with the magnetic forces due to a 46-μm-thick rolled magnetic foil. The design includes the flow through the orifice, squeeze film damping due to beam motion, beam elasticity, and electromagnetics. The microvalve was tested for power consumption, flow rate, time response, Ni/Fe alloy composition, and magnetic foil properties. The valve operates at 1-2 V in both air and water