Tailoring of Surfaces with Ultrathin Layers for Controlled Binding of Biopolymers and Adhesion and Guidance of Cells

Various strategies are described for the bio-functionalization of solid substrates by design of interfacial architectures. The first approach is based on the self-assembly process of long-chain thiol molecules from solution to a (noble) metal surface. If some of these building blocks carry a binding site (ligand) for proteins (receptors, antibodies, etc.) the metal surface can be tailored for maximum specific binding while simultaneously minimizing nonspecific adsorption. The second concept is based on polymers that are covalently attached to (oxide) surfaces. The preparation of these (end-) grafted functional polymers involves either the binding of preformed macromolecules to corresponding sites at the surface of the support or the recently introduced “grafting-from” method, by which an initiator molecule is first covalently bound to the surface and then activated — either by heat or light — in the presence of suitable monomer units such that a polymer chain grows from the solid/solution interface. Finally, the functionalization of patterned surfaces by peptide chains that mimic the binding domains of cell adhesion proteins is summarized. It is demonstrated that not only the selective adhesion of neuronal cells can then be controlled, but also their development with the outgrowth of dendrites and axons.     

Engineering plastics from lignin. VI. Structure–property relationships of PEG-containing polyurethane networks

Hydroxypropyl lignin-based thermosetting polyurethanes were synthesized with excess hexamethylene diisocyanate (HDI) and tolylene diisocyanate (TDI) by solution casting. Four polyethylene glycols (PEG) of molecular weight 400, 600, 1000, and 4000 were mixed with lignin polyol to incorporate different proportions of soft segment into the network prior to crosslinking. Neither thermal nor mechanical and limited small angle x-ray scattering (SAXS) analysis provided distinct evidence for phase separation and microstructure formation. The study examines the effect of the soft segment in relation to chain length and weight contribution on the thermal and mechanical properties of the final networks. A significant sensitivity of glass transition temperature (T_g), of swelling in DMF, and of the mechanical properties to soft segment content was observed. Some of this sensitivity must, however, be attributed to differences in crosslink density since the polyol to diisocyanate weight ratio was kept constant throughout the synthesis series. The magnitude of the change of the different properties was found to be influenced by both glycol content and glycol molecular weight. The T_g of the network decreased from 105°C to as low as 38°C (HDI), and from 158°C to 70°C (TDI), with incorporation of up to 17.8% glycol, and it was greater with lower molecular weight glycols than with higher ones at any weight fraction. Swelling in DMF increased as expected with soft segment content. Mechanical properties were affected most if HDI and lower molecular weight glycols were used. The uniformity in structure, reduction in brittleness, and considerable improvement in mechanical properties with inclusion of minor PEG contents indicates that lignin-based network polyurethanes can be synthesized with controllable performance characteristics.     

Lyso platelet activating factor (LysoPAF) and its enantiomer. Total synthesis and carbon-13 NMR spectroscopy

Described is a reaction sequence for the total synthesis of lyso platelet activating factor (lysoPAF; 1-O-alkyl-sn-glycero-3-phosphocholine) and its enantiomer. The procedure is versatile and yields optically pure isomers of defined chain length. The synthesis is equally suited for the preparation of lysoPAF analogues and its enantiomers with unsaturation in the long aliphatic chain. First,rac-1(3)-O-alkylglycerol is prepared by alkylation ofrac-isopropylideneglycerol with alkyl methanesulfonate followed by acid-catalyzed removal of the ketal group. The primary hydroxy group of alkylglycerol is then protected by tritylation, the secondary hydroxy group is acylated, and the protective trityl group is removed under mild acidic conditions with boric acid on silicic acid, essentially without acyl migration. Condensation of the diradylglycerol with bromoethyl dichlorophosphate in diethyl ether, hydrolysis of the resulting chloride, and nucleophilic displacement of the bromine with trimethylamine givesrac-1-O-alkyl-2-acylglycero-3-phosphocholine in good overall yield. The racemic alkylacylglycerophosphocholine is finally treated with snake venom phospholipase A₂ (Ophiophagus hannah) which affords 1-O-alkyl-sn-glycero-3-phosphocholine (lysoPAF) of natural configuration in optically pure form. The “unnatural” 3-O-alkyl-2-O-acyl-sn-glycerol-1-phosphocholine enantiomer, which is not susceptible to phospholipase A₂ cleavage, gives 3-O-alkyl-sn-glycero-1-phosphocholine upon deacylation with methanolic sodium hydroxide. Homogeneity and structure of the intermediates and final products were ascertained by carbon-13 nuclear magnetic resonance spectroscopy on monomeric solutions.     

Untersuchung des Passivierungsmechanismus von Eisen in Phosphatelektrolyten an erosiv beanspruchten Oberflächen

Investigation into the passivation mechanism of iron in phosphate electrolytes on surfaces exposed to erosive attack On iron electrodes in neutral phosphate electrolytes by continuous solid particle impingement a reaction layer is formed within the transition potential region under anodic polarization. XPS and AES investigations show that the reaction layer formed under impingement will be replaced by an oxide layer during the transition into the passive state under simultaneous decrease of the layer thickness. The active/passive transition in phosphate electrolytes may be attached to the equilibrium potential of the reaction . According to this thermodynamic interpretation of both the active/passive transition and the passive/active transition, respectively on iron in presence of phosphate ions may be described as the Fe(II)/Fe(III)-redox reaction with two solid phases, the iron(II)-phosphate phase and the iron(III)-oxide phase. The increase of the interfacial dynamic processes at the solid/liquid interface causes in consequence of the solid particle impingement that thermodynamic laws govern the course of reactions.     

Support Vector machine and duration-aware conditional random field for identification of spatio-temporal activity patterns by combined indoor positioning and heart rate sensors

Tracking the spatio-temporal activity is highly relevant for domains like security, health, and quality management. Since animal welfare became a topic in politics and legislation locomotion patterns of livestock have received increasing interest. In contrast to the monitoring of pedestrians cattle activity tracking poses special challenges to both sensors and data analysis. Interesting states are not directly observable by a single sensor. In addition, sensors must be accepted by cattle and need to be robust enough to cope with a rough environment. In this article, we introduce the novel combination of heart rate and positioning sensors. Attached to neck and chest they are less interfering than accelerometers at the ankles. Exploiting the potential of such combined sensor system that records locomotion and non-spatial information from the heart rate sensor however is challenging. We introduce a novel two level method for the activity tracking focused on the duration and sequence of activity states. We combine Support Vector Machine (SVM) with Conditional Random Field (CRF) and extend Conditional Random fields by an explicit representation of duration. The SVM characterizes local activity states, whereas the CRF addresses sequences of local states to sequences incorporating spatial and non-spatial contextual knowledge. This combination provides a reliable and comprehensive identification of defined activity patterns, as well as their chronology and durations, suitable for the integration in an activity data base. This data base is used to extract physiological parameters and promises insights into internal states such as fitness, well-being and stress. Interestingly we were able to demonstrate a significant correlation between resting pulse rate and the day of pregnancy.     

Mesh-free canonical tensor products for six-dimensional density matrix: computation of kinetic energy

The computation of a six-dimensional density matrix is the crucial step for the evaluation of kinetic energy in electronic structure calculations. For molecules with heavy nuclei, one has to consider a very refined mesh in order to deal with the nuclear cusps. This leads to high computational time and needs huge memory for the computation of the density matrix. To reduce the computational complexity and avoid discretization errors in the approximation, we use mesh-free canonical tensor products in electronic structure calculations. In this paper, we approximate the six-dimensional density matrix in an efficient way and then compute the kinetic energy. Accuracy is examined by comparing our computed kinetic energy with the exact computation of the kinetic energy.