Defect detection using feature point matching for non-repetitive patterned images

Defect detection is an important technology for the quality control in the production process of wafer, TFT-LCD and PCB. Inspection is performed using the finished product’s image. The images are classified into two different groups—images with a repetitive pattern on a regular cycle and images without a repetitive pattern. A standard object for comparison is required, because manual defect detection is not possible for areas without repetitive patterns. In such areas, defect detection occurs through contrasting a reference pattern to the pattern being inspected. Methods of inspection using reference image have been researched but have limitations due to their requirement of precise alignment of the images. This paper proposes a method of defect detection to overcome such limitation using feature point matching. Feature points are extracted using a corner detector and detects defect by finding a correspondence between two feature point sets. Performance of the proposed method is evaluated by using Wafer SEM images and compared with conventional methods. Experiment results demonstrate the proposed method achieves higher detection accuracy than conventional methods and is less sensitive to alignment error and noise.     

Humidity‐sensitive properties of new polyelectrolytes based on the copolymers containing phosphonium salt and phosphine function

A simple strategy was developed based on a new reactive function‐ and a salt‐containing new monomer, 4‐vinylbenzyl dimethyl 2‐(dimethylphosphino)ethyl phosphonium chloride (VDEPC), to obtain stable humidity‐sensitive membranes. The major ingredient of a humid membrane is crosslinked polyelectrolytes obtained from copolymers of VDEPC/2‐ethylhexyl acrylate (2‐EHA) = 1/0, 4/1, and 2/1. Isothermal humidity absorption experiments were performed for the estimation of humidity‐sensing materials. The crosslinked copolymers prepared from the reaction of VDEPC/2‐EHA = 4/1 with 1,4‐dichlorobutane showed an average impedance of 595, 39.1, and 3.9 KΩ at 30, 60, and 90% RH, respectively. Their hysteresis, temperature dependence, frequency dependence, and response time were measured. The reliability including water resistance and a long‐term stability were estimated for the application of the common humidity sensor. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1062–1070, 2003     

Synthesis and properties of acrylonitrile-CR-methyl methacrylate graft copolymer

Graft copolymerization of acrylonitrile (AN) and methyl methacrylate (MMA) onto polychloroprene (CR) was carried out using benzoyl peroxide as initiator. The effects of mole ratio of AN to MMA, reaction temperature, reaction time, solvent, and initiator concentration on the graft copolymerization were examined. It was found that the thermal stability and weatherability of the AN—CR—MMA graft copolymer (ACM) were considerably better than those of CR.     

The effect of composition on thermal,mechanical, and morphological properties of thermotropic liquid crystalline polyester with alkyl side-group and polycarbonate blends

A thermotropic liquid crystalline polymer (LCP) with an alkyl side-group was synthesized. Blends of the LCP with polycarbonate (PC) were prepared by coprecipitatton from a common solvent. The rheological behavior of the LCP/PC blends was found to be very different from that of PC, and significant viscosity reductions were observed in the temperature range of 200–230°C. Blends of different LCP compositions were extruded with different draw ratio from a capillary rheometer. The ultimate tensile strength showed a maximum at a 10 wt% LCP composition in the blends. It decreased for compositions greater the 10 wt% LCP, whereas the initial modulus increased with increasing LCP content. The morphology of the blends was found to be affected by their compositions. Scanning electron microscopy (SEM) studies revealed finely dispersed spherical LCP domains in the PC matrix. The SEM micrographs also showed a poor adhesion between the two phases.     

Effectiveness test of alginate‐derived polymeric surfactants

A series of alginate‐derived polymeric surfactants (APSs) with a linear alkyl group (C8, C12, C16) was synthesized by oxidation followed by reductive amination of 2,3‐dialdehydic alginate. The products were characterized by measuring IR spectra, NMR spectra, surface tension and critical micelle concentration (cmc). They were also tested for the solubilization of azobenzene and adsorption of heavy metal. In the case of 40% CHO‐C8 APSs, the lowest interfacial tension value (31.5 m Nm^?1) was obtained at the cmc value of 1.35 g dm^?3. The dissolving capacity of 40% CHO‐C8 APS towards azobenzene was 27 times greater than that of alginate. The overall cobalt (Co²⁺) removal efficiency by adsorption using APSs was high compared with that of sodium alginate at pH 3, 5 and 7. Equilibrium aspects of cobalt adsorption onto 10% CHO‐APSs were studied, and the results show that APSs had high equilibrium capacities for cobalt uptake, 115.5 mgg^?1. © 2002 Society of Chemical Industry     

Syntheses and biological activities of polymers containing methacryloyl‐2‐oxy‐1,2,3‐propanetricarboxylic acid or 5‐fluorouracil

A series of novel copolymers, poly(methacryloyl‐2‐oxy‐1,2,3‐propanetricarboxylic acid‐co‐exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalic acid) [poly(MTCA‐co‐ETAc)], poly(methacryloyl‐2‐oxy‐1,2,3‐propanetricarboxylic acid‐co‐hydrogenethyl‐exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalate) [poly(MTCA‐co‐HEET)], and poly(methacryloyl‐2‐oxy‐1,2,3‐propanetricarboxylic acid‐co‐α‐ethoxy‐exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthaloyl‐5‐fluorouracil) [poly(MTCA‐co‐EETFU)], were prepared from corresponding monomers by photopolymerizations at 25°C for 48 h. The polymers were identified by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopies. The number‐average molecular weights of the fractionated polymers determined by GPC were in the range from 9400 to 14,900 and polydispersity indices were 1.2–1.4. The in vitro IC₅₀ values of polymers against mouse mammary carcinoma (FM3A), mouse leukemia (P388), and human histiocytic lymphoma (U937) as cancer cell lines and mouse liver cells (AC2F) as a normal cell line were much higher compared to that of 5‐fluorouracil (5‐FU). The in vivo antitumor activities of monomers and polymers against mice bearing sarcoma 180 tumor cell line were better than those of 5‐FU. The inhibition of DNA replication and antiangiogenesis activities of MTCA and copolymers were better compared to those of 5‐FU. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 57–64, 2004     

Selective CO oxidation in the presence of hydrogen over supported Pt catalysts promoted with transition metals

Selective CO oxidation in the presence of excess hydrogen was studied over supported Pt catalysts promoted with various transition metal compounds such as Cr, Mn, Fe, Co, Ni, Cu, Zn, and Zr. CO chemisorption, XRD, TPR, and TPO were conducted to characterize active catalysts. Among them, Pt-Ni/γ-Al₂O₃ showed high CO conversions over wide reaction temperatures. For supported Pt-Ni catalysts, Alumina was superior to TiO₂ and ZrO₂ as a support. The catalytic activity at low temperatures increased with increasing the molar ratio of Ni/Pt. This accompanied the TPR peak shift to lower temperatures. The optimum molar ratio between Ni and Pt was determined to be 5. This Pt-Ni/γ A1₂O₃ showed no decrease in CO conversion and CO₂ selectivity for the selective CO oxidation in the presence of 2 vol% H₂O and 20 vol% CO₂. The bimetallic phase of Pt-Ni seems to give rise to stable activity with high CO₂ selectivity in selective oxidation of CO in H₂-rich stream.     

Synthesis and characterization of in situ polymerized segmented thermoplastic elastomeric polyurethane/layered silicate clay nanocomposites

Nanocomposites based on thermoplastic elastomeric polyurethane (TPU) and layered silicate clay were prepared by in situ synthesis. The properties of nanocomposites of TPU with unmodified clay were compared with that of organically modified clay. The nanocomposites of the TPU and organomodified clay showed better dispersion and exhibited superior properties. Exfoliation of the clay layers was observed at low organoclay contents, whereas an intercalated morphology was observed at higher clay contents. As one of major purposes of this study, the effect of the silicate layers in the nanocomposites on the order–disorder transition temperature (T_ODT) of the TPU was evaluated from the intensity change of the hydrogen‐bonded and free carbonyl stretching peaks and from the peak position change of the N? H bending peak. The presence of the organoclay increased T_ODT by approximately 10°C, which indicated improved stability in the phase‐separated domain structure. The layered silicate clay caused a tremendous improvement in the stiffness of the TPU; meanwhile, a reduction in the ultimate elongation was observed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3048–3055, 2006     

Synthesis of syndiotacticity‐rich high molecular weight poly(vinyl alcohol) by suspension polymerization of vinyl pivalate and saponification

Vinyl pivalate (VPi) was suspension‐polymerized to synthesize high molecular weight (HMW) poly(vinyl pivalate) (PVPi) with a high conversion above 95% for a precursor of syndiotacticity‐rich HMW poly(vinyl alcohol) (PVA). Also, the effects of the polymerization conditions on the conversion, molecular weight, and degree of branching (DB) of PVPi and PVA prepared by the saponification of PVPi were investigated. Bulk polymerization was slightly superior to suspension polymerization in increasing the molecular weight of PVA. On the other hand, the latter was absolutely superior to the former in increasing the conversion of the polymer, indicating that the suspension polymerization rate of VPi was faster than that of the bulk one. These effects could be explained by a kinetic order of a 2,2′‐azobis(2,4‐dimethylvaleronitrile) concentration calculated by the initial rate method. Suspension polymerization of VPi at 55°C by controlling various polymerization factors proved to be successful in preparing PVA of HMW [number‐average degree of polymerization (P_n): 8200–10,500], high syndiotactic diad content (58%), and very high yield (ultimate conversion of VPi into PVPi: 94–98%). In the case of the bulk polymerization of VPi at the same conditions, the maximum P_n and conversion of 10,700–11,800 and 32–43% were obtained, respectively. The DB was lower and the P_n was higher with PVA prepared from PVPi polymerized at lower initiator concentrations. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 832–839, 2003     

Preparation of water‐soluble syndiotacticity‐rich high molecular weight poly(vinyl alcohol) microfibrillar fibers using copolymerization of vinyl pivalate and vinyl acetate and saponification

Water‐soluble high molecular weight (HMW) syndiotactic poly(vinyl alcohol) (s‐PVA) microfibrillar fibers were prepared by the saponification with various conditions such as amount of alkali solution, saponification temperature, and saponification concentration from copoly(vinyl pivalate (VPi)/vinyl acetate (VAc)) copolymerized using various VPi/VAc feed ratios. To produce s‐PVA microbrillar fibers having various water‐soluble temperatures for many industrial applications, the intrinsic viscosities, syndiotactic diad (S‐diad) contents, and degrees of saponification (DS)s of PVAs were finely controlled to 1.2–3.6 dL/g, 56.3–58.3%, and 91.4–98.3%, respectively. Through a series of experiments, it was found that the amount of alkali may alter the structure of the saponified polymers, primarily the DS, and the structural variation changes viscosity. That is, intrinsic viscosity was sharply decreased as the amount of alkali solution was increased. DS was increased with an increase in the amount of alkali solution. S‐diad content was increased with an increase in the VPi content. HMW s‐PVA microfibrillar fibers having S‐diad content of 56.3–58.3% prepared by the saponification of copoly(VPi/VAc) were completely soluble in water at 100°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1482–1487, 2003