精制棉电催化氧化技术及工艺研究

利用电催化氧化技术使棉短绒发生快速断裂反应,同时使木质素、果胶等带色基团退色,减少污水处理难度。生产的精制棉纤维素一致性率、a-纤维素含量达到98%以上,聚合度降低到700DP,反应时间由原来的2.5h缩短到20min,色度减少80%。通过实践,实现了生产精制棉节能降耗的目的,且明显减轻了对环境的污染。     

Corrosion behavior and mechanism of the automotive hot-dip galvanized steel with alkaline mud adhesion

The corrosion behavior and mechanism of hot-dip galvanized steel and interstitial-free (IF) substrate with alkaline mud adhesion were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS), and linear polarization. The results show that non-uniform corrosion occurs on the galvanized steel and IF substrate during 250 h with the mud adhesion. The corrosion products on the galvanized steel are very loose and porous, which are mainly ZnO, Zn5(OH...     

Numerical simulation on the rheo-diecasting of the semi-solid A356 aluminum alloy

The effect of injection pressure, piston velocity, and the forming temperature of semisolid slurry on the filling behavior of the semi-solid A356 aluminum alloy was investigated by simulation methods. The simulation results show that these processing parameters have an important effect on the filling behavior of the semi-solid A356 aluminum alloy. The slurry flows steadily in the cavity when the injection pressure, the piston velocity, and the forming temperature are low, but it is prone to turbulent flow w...     

Carburization of ferrochromium metals in chromium ore fines containing coal during voluminal reduction by microwave heating

Chromium ore fines containing coal (COFCC) can be rapidly heated by microwave to conduct the voluminal reduction, which lays a foundation of getting sponge ferrochromium powders with a lower content of C. Under the conditions of COFCC with n(O):n(C) (molar ratio) as 1.00:0.84 and n(SiO₂):n(CaO) as 1.00:0.39, the samples were heated by 10 kW microwave power to reach the given temperatures and held for different times respectively. The results show that the low-C-Cr ferrochromium metal phase in the reduced materials forms before the high-C-Cr ferrochromium metal phase does. With increasing temperature the C content of ferrochromium metals is in a positive correlation with the content of Cr. The C content of ferrochromium metal in reduced materials is 0–10.07% with an average value of 4.68%. With the increase of holding time the Cr content in ferrochromium metals is in a negative correlation with the content of C, while the content of Fe changes in the contrary way. In the microwave field the kinetic conditions of carburization are closely related with the temperature of microwave heating, holding time and carbon fitting ratio. Foundation item: Project(50474083) supported by the National Natural Science Foundation of China; Project supported by the Baoshan Iron & Steel Co. Ltd. of China     

火电机组过热汽温神经网络控制的研究

研究了单神经元PID控制器和BP神经网络PID控制器在火电机组过热汽温的应用．实验结果表明,神经网络PID控制结构简单,有较强的鲁棒性,取得了较好的控制效果．     

江西浒坑钨矿含矿韧性剪切带及其^40Ar-^39Ar年代学约束

江西省浒坑钨矿是一个大型石英脉黑钨矿矿床,含矿石英脉除了块状石英脉以外,还大量发育条带状石英脉。本文针对条带状石英脉进行了专门研究,认为条带状石英脉实质上是韧性剪切带,以透入性发育的剪切面理和拉伸线理、剪切透镜体、剪切分异条带普遍发育为特色。剪切带岩石以石英质糜棱岩为主,具有丰富的塑性变形显微构造特征。显微剪切指向构造统计表明,东西向和北西向脉组的运动方式均以左旋正滑为主,近水平脉组则以正滑为主。北西向韧性剪切带的新生绢云母^40Ar-^39Ar坪年龄为140．3±1．0Ma,相应的等时线年龄为139．6±2．4Ma;而东西向韧性剪切带绢云母^40Ar-^39Ar坪年龄则比较复杂,高温阶段年龄可能受到成矿期白云母残斑的影响,中温阶段的表观年龄和总气体年龄更接近前一样品的坪年龄。据此认为韧性剪切变形的年龄为140Ma左右,韧性变形发生在成岩和成矿之后。条带状石英脉系块状石英脉韧性剪切改造而成,推测其形成主要与晚期补充岩体的斜向上侵作用有关,但更为合理的模式需要更多资料的进一步证实。     

传统吉祥纹样在现代平面设计思维中的运用

基于“民族风”在现代平面设计中的兴起,传统纹样在平面设计中的运用已成为现代平面设计中的一种常用思维方法,如提取并运用传统纹样中的吉祥寓意、在传统纹样中加入新文化的元素或在现代平面设计中融入传统文化,由此建立起传统纹样与现代平面设计一种协调共融的联系,从而使现代平面设计与时代、社会文化共同发展．     

基于湍流自旋理论的二维方腔旋转流动的数值模拟

基于湍流自旋理论对旋转方腔内不可压流体的流动进行了二维数值模拟,用有限容积法在交叉网格上对控制方程进行离散,采用SIMPLEC算法进行计算,对流项的离散方面采用了延迟修正的QUICK格式,最后采用二维的TDMA算法进行迭代求解,并对边界条件处理采用了Block块技术.同时与经典理论即Navier-Stokes（N-S）方程的模拟情况做了比较.得出下列结论：N-S方程表明方腔旋转时内部流体只会作刚体旋转;而自旋模型表明该类流动具有不平凡性和不稳定性：即流体的内聚力不足以使流体跟随固体边界作刚体运动,旋转边界必然在流体中诱导出小尺度耗散涡旋,这些小尺度涡旋在固壁附近组织出正负相间的拓扑缺陷（涡旋场强）,这一流体定向奇性会与速度场耦合,并容易形成复杂的大尺度的涡旋运动.     

高压输变电工程的电磁辐射及其环境影响评价

介绍高压输变电工程产生的电磁环境与人类健康关系以及国内外的相关标准,通过监测实例说明已运行的500 kV变电站和线路的电磁辐射均符合相关标准的要求,同时提出了环境影响评价工作的问题和建议.     

基于ANSYS的变刚度螺旋弹簧优化设计

结合现有的弹簧设计理论及方法和ANSYS软件的优化功能,采用APDL语言实现了一种变刚度螺旋弹簧参数化的优化设计,给出其基本设计过程。采用该程序对实例中的弹簧进行优化分析,实例表明,提出的设计方法简单易行,结果合理。