注硼中子寿命测井注硼工艺优化设计

注硼中子寿命测井是一项水淹层测井新技术 ,对老油田的产层分析评价、剩余油含量估算等方面发挥了重要的作用。但测井施工时 ,往往由于注硼工艺不当导致硼酸的渗吸量难以准确反映地层可动水的含量 ,从而产生解释上的困难和误区。在渗流与扩散理论相结合的基础上 ,结合华北油田的施工实践 ,介绍了确定注硼管柱、硼酸用量、注硼压力以及硼酸扩散时间的基本原则和实际经验 ,为工艺的优化设计提供了一些方法与思路     

检测骨架图形特征点的新方法

端点、折点、歧点和交点是骨架图形的重要特点是，提出用快速查表法检测侯选特征点，再进行侯选特征点聚集，用局部结构分析，去除假特征点，判别真特征点的类型，并对折点给以大致的定量描述。实验结果表明，该方法能快速有效地找出骨架图形的特征点，在目标识别、字符识别等应用中起着关键作用。     

Fuel management of the HTR-10 including the equilibrium state and the running-in phase

The mode of fuel management of the HTR-10 was studied, including the simulation of the fuel shuffling process and the measurement of the burnup of a fuel element. The prior consideration was the design of the equilibrium state. Based on this the fuel loading of the initial core and the fuel shuffling mode from the initial core through the running-in phase into the equilibrium state were studied. The code system VSOP was used for the physical layout of the HTR-10 at the equilibrium state and in the running-in phase. For the equilibrium state, in order to lessen the difference between the peak and the average burnup, 5-fuel-passage-through-the-core was chosen for the fuel management. The average burnup of the spent fuel for the equilibrium core is 80 000 MWd t⁻¹, and the peak value of it is less than 100 000 MWd t⁻¹ when the burnup of the recycled fuel element is under 72 000 MWd t⁻¹. The mixture of fuel element and graphite element was used for the initial core loading, the volume fractions of the fuel and the graphite elements were 0.57 and 0.43, respectively. During the running-in phase, the volume fraction of graphite will decrease with the fresh fuel elements being loaded from the top of the core and the graphite elements discharged from the bottom of the core. The fuel shuffling mode is similar to that of the equilibrium state. The burnup limit of recycled fuel element is also 72 000 MWd t⁻¹ and the peak burnup is less than 100 000 MWd t⁻¹. Finally the core will be full of fuel elements with a certain profile of burnup and reaches the equilibrium state. According to the characteristics of the pebble-bed high temperature gas-cooled reactor, a calibrating method of concentration of ¹³⁷Cs was proposed for the measurement of fuel burnup.     

再论“用离心机作静力结构模型试验”

 本文通过最近所作的两个离心模型试验,进一步探讨了用离心机作静力结构模型试验的有关问题,试验结果进一步证明用离心机作静力结构模型试验,无论在理论上和试验技术上都是可行的,最后将有关问题作了进一步的讨论。     

电容位移法精确测量磁性薄膜的磁致伸缩系数

介绍了一种精确测量磁性薄膜磁致伸缩系数方法－电容位移法，并自行研制组装了一套测量装置，通过误差分析，仪器的精确标定，对稀土－铁超磁致伸缩薄膜的磁致伸缩系数进行了测量，获得满意的结果。     

对高炉冷却壁设计参数的探讨

通过炉衬、冷却壁、炉壳等与炉内温度之间的传热计算，对冷却壁的设计参数进行了搪塞分析，并提出了推荐的冷却壁设计参数。     

利用液晶光阀实现的光学形态变换

提出了基于液晶光阀的光学二值图像领域处理器，利用它完成了扩、蚀和边缘检测等形态变换操作，并给出了实验结果。     

4×622Mb／sWDM40km光通信系统实验

本文完成了我国第一个４×６２２Ｍｂ／ｓ波分复用（ＷＤＭ）光通信系统实验，使单根光纤线路通信容量达２．４Ｇｂ／ｓ。该系统以ＤＦＢ－ＬＤ为光源，工作波长在１．５５μｍ附近，ＬＤ的工作频率稳定度优于±１５０ＭＨｚ，信道间隔２ｎｍ左右，无中继传输距离为４３．６ｋｍ，采用Ｆ－Ｐ调谐光滤波器作为解复用器，接收机灵敏度达－３０ｄＢｍ。     

内燃机车曲轴中频淬火过程的数值模拟

借助 ANSYS大型有限元分析软件 ,实现了 16 V2 4 0曲轴淬火过程的计算机模拟 ,模拟结果可直观地显示出任一时刻曲轴表面及内部的温度分布、冷却曲线以及淬火结束后的残余应力分布 ,并能预测淬硬层深度。同时对比了轴颈内圆角处进行淬火和不进行淬火两种工艺的效果 ,为现场提供了用虚拟现实方法详尽分析和研究淬火工艺的工具。