火焰原子吸收法测定高铋物料中的铅

本文介绍了在以高铋物料为基体 ,5 %的HNO3 介质中 ,波长 2 17nm处进行火焰原子吸收法测定铅的试验 ,采用标准加入法进行回收率的试验 ,回收率大于 98% ,特征浓度为 0 .0 7μg/ml,结果令人满意 ,能满足炉前样分析的要求     

枣35断块沙三段玄武岩储层特征及成藏条件分析

从地质、地震、测井及试油试采等方面入手，并采用新技术，对自来屯构造枣35断块沙三段玄武岩储层特征及成藏条件进行了分析。其结果为该区下一步勘探、开发及进一步研究奠定了基础。     

金属—PAN—S配合物的极谱研究——Ⅱ:Fe~(3+)—PAN—S—TEA—NH_3·H_2O—NH_4Cl体系配合吸附波

在NH_3·H_2O—NH_4Cl—三乙醇胺底液中Fe(Ⅲ)与PAN—S产生一灵敏的配合吸附波,峰电位在—0.50伏(vs.SCE)。峰电位与铁离子浓度在2.8×10~8～3.4×10~(-6)mol/L范围内线性良好,检出下限可达2.8×10~(-8)mol/L。该法用于乳粉、头发、血清等样品的测定,结果满意。     

保序回归的大样本性质

利用保序回归与极大似然估计之间的关系,从极大似然估计解的大样本性质出发,得到了保序回归解的两个大样本性质。     

柴达木盆地北缘的右行走滑冲断系统及其动力学

通过对于断裂系统分析和地球物理资料的解释,证实了柴达木盆地北缘西段的主要构造形成时间为上新世以后,变形样式为一系列右行走滑冲断构造。走滑冲断构造带内部的断层在平面上呈分支复合,剖面上表现为正花状构造,断层上、下盘地层层序无法直接对比。右行走滑冲断构造形成于南祁连由北向南的斜向推覆作用,而主要应力来源于柴达木地块北缘由南向北的陆内俯冲作用。用一个运动学模型解释了柴北缘的右行走滑冲断作用机制。     

生物膜法处理2,3-二甲基苯胺废水试验研究

采用缺氧折流板生物膜和循环移动载体生物膜反应器处理2，3－二甲基苯胺废水，结果表明，缺氧折流板反应器具有厌氧滤池和厌氧折流板反应器的优点，当水力停留时间为10．5h(缺氧5．5h，好氧5h)时，系统去除率可达89．7％。     

基于Java RMI技术的大型机群监控系统的设计与实现

机群监控系统可有效的提高大型机群的可管理性和可用性。本文提出了一种基于JAVA RMI技术的机群监控系统模型，并给出其实现方法。该系统具有开发快速、可跨平台、易于扩展等特性。     

空心微珠改性硬质聚氯乙烯复合材料的应用研究

经过改性的超细空心微珠可以作为填料加入到硬质聚氯乙烯（PVC－U）树脂中，同时改善PVC树脂的流变性、冲击性能和刚性等性能。研究结果表明，超细空心微珠加入到硬质PVC管材中，可以明显改善PVC硬管的加工流动性能，显著缩短塑化时间，降低最大扭矩。而超细空民微珠加入到硬质PVC板材时，可以提高PVC硬板的冲击性能，减小制品的收缩率，赋予PVC硬板优异的耐腐蚀性能，且产品的各项性能均符合PVC板材国家标准GB／T4454－96。     

Preparation of nanosized titania powder via the controlled hydrolysis of titanium alkoxide

By controlling the hydrolysis of titanium butoxide, followed with or without an ethanol washing process, the preparation of nanoscale titania powder was studied in detail. The characteristics of different powders produced by the direct precipitation (without an ethanol wash) and ethanol wash processes were studied by X-ray diffraction, transmission electron microscopy, BET, thermogravimetry and differential thermal analysis techniques. By comparison, it was found that both the direct precipitation and ethanol wash methods can obtain slightly agglomerated nanoscale titania powders of less than 15 nm, but the ethanol wash can further reduce the agglomeration. The particle sizes of titania powders can be modified while still retaining the anatase structure.     

Effect of processing history on the properties of Ag-based tapes

The Bi-system tapes and coils were prepared by the powder-in-tube method. The effect of processing and heat treatment on the properties of the tapes and coils was studied. It is found that the shearing stress produced by the rolling process may destroy the 2223 phase, and the destroyed 2223 phase cannot be recovered by heat treatment, whereas the pressing stress produced by the uniaxial pressing process only makes the 2223 phase grains break, and the broken 2223 phase can be closed by the heat treatment. TheJ _c values of the rolling samples, pressing sample, and the coil with a diameter of 35 mm are over 1.3×10⁴, 2.5×10⁴, and 4×10³ A/cm² (77 K, 0 T), respectively.