Anti-oxidation mechanism of SiC-B4C-C composites

Mixture of green petroleum coke, B4 C and SiC together with short carbon fiber were employed as starting materials, the mixture was press formed without any binder after grinding, dense and homogeneous binderless SiC-B4 C-C（carbon/ceramic） composites were then obtained after sintering. Composites thus prepared possess excellent anti-oxidation property, that is, mass loss less than IG within the temperature range from 900 to 1 100 ℃ for 10 h. Anti-oxidation mechanism was also discussed from the viewpoint of thermodynamics, excellent anti-oxidation property of materials thus prepared can be discribed to 1） solid SiO2 formed from SiC, which restrains the filtering of oxygen and simultaneously, its volume expansion brought about by the reaction takes roles both walling up the original pores and making the material more compact; 2） liquid B2O3 from the reaction of B4C not only makes the combination with C, B4 C and SiC tighter through forming solid solution, but also effect of reaction SiC（s）＋2CO（g） =SiO2 （s）＋3C（s） is an expansive process, which improves the microstructure of the material.     

基于正交试验的注塑成型工艺参数CAE模拟设定

运用基于CAE技术的注塑工艺参数优化配置和注塑工艺方案设计的思想,结合正交试验设计方法对工艺参数进行CAE仿真试验,并以零件翘曲变形为优化目标,通过敏感因子分析,获得最佳工艺参数组合.经注塑机试模和三坐标测量机的检测分析,验证了CAE模拟结果的准确性和最佳工艺参数组合在实际生产中的效果.     

ZTC4筒形件温成形扩口数值模拟

对铸造Ti-6Al-4V筒形件温成形扩口成形工艺进行了数值模拟分析,得出了优化的工艺参数,并对凸模锥角进行了优化模拟,得出了合适的锥角。     

Metallographic sample prepared by ion beam etching

Ion beam etching technique was used to reveal the metallograhpic microstructure and interface morphology of electroplating chromium coating, in particular, whose substrate surface layer was treated in advance by laser quenching. Chemical etchings were also conducted for comparison. The reveal microstructures were observed and analyzed by scanning electron microscopy. The results show that ion beam etching can reveal well the whole microstructures of composite coating-substrate materials.     

数控程序的高效设计及其刀具轨迹优化

介绍了提高数控程序编制效率的途径 ,并以实例说明了如何对数控程序刀具轨迹的质量进行优化 ,对从事数控工艺与编程的技术人员有参考和借鉴的作用。     

Wear-resistance and anti-scuffing of multi-arc ion plating molybdenum films

The multi-arc ion plating technology was employed to prepare the molybdenum films with thickness of 3 μm on the AISI 1045 steel. The wear and scuffing tests were carried out on the ball-on-disc tester. AFM and SEM equipped with EDS were adopted to observe and analyze the morphologies and element compositions of surface,cross-section and worn scar of the Mo film. The phase structure was studied by XRD and the bonding strength between Mo film and substrate was measured by scratching tester. The tribological experiments show that the Mo film possesses a good wear-resistance and an excellent anti-scuffing property. The failure mechanism of Mo film under extreme condition is flaking off.     

基于VC++6.0的3-DOF机器人鼠标移动轨迹示教控制系统

采用VC 6.0开发软件,设计了一个3-DOF机器人鼠标移动轨迹示教控制系统,在该控制系统中采用鼠标移动轨迹示教来替代传统按钮式示教盒示教,有效地克服了传统示教次数多、运动不稳定的缺点.适用于对精度要求不高的机器人进行有特定要求的点位控制.     

Influencing factors on elastic-plastic deformation of multi-layered surfaces under sliding contact

Stress distribution in the gradient multi-layered surface under a sliding contact was investigated using finite element method(FEM). The main structure parameters of layered surface discussed are total layer thickness,layer number and elastic modulus ratio of layer to the substrate. A model of multi-layered surface contact with rough slider was studied. The effect of the surface structure parameters on the elastic-plastic deformation was analyzed.     

基于高能效及公平性的移动设备定位算法

通过分析校园师生基于GPS的真实活动轨迹,以及何种算法才最适合具有自私性的移动用户展开合作,提出一种高能效及用户公平定位技术.通过采用代理设备合作思想,提出一种集中式最优算法,在保证固定精度界限和设备公平的基础上,实现移动设备GPS时间平均功率最小化.通过控制退避时间和GPS关闭时间,提出一种分布式准最优算法.最后,基于多种拓扑结构进行全面的仿真实验,验证了算法的高能效性和公平性.     

接收方预约信道的水声传感器网络MAC协议

为了获得更高的网络吞吐量,更低的端到端时延,设计出了一种适用于分簇网络的水声传感器网络MAC协议,该协议采用接收方建立握手机制,有效的获取邻居节点通信时的状态,动态分配发送时隙,实现数据包以报文序列方式无冲突的到达接收端.仿真结果表明,与同类MAC协议(FERI, RIPT)相比,该协议提高了网络吞吐量,降低了数据丢失率和端到端时延.