不锈钢转化器在中小型硫酸装置上的应用前景

分析了传统碳钢转化器存在的缺点。相对于碳钢转化器，不锈钢转化器具有结构简单、安装方便、耐高温、不易漏气、维护工作量小等优点。通过碳钢转化器和不锈钢转化器结构和造价的比较，表明不锈钢转化器在中小型硫酸装置中也有良好的应用前景。     

Monodisperse polymer/metal composite particles by electroless chemical deposition: Effect of surface functionality of polymer particles

Micron‐sized polymer particles were coated with layers of nickel compounds by plating electrolessly in the presence of aqueous solutions of nickel chloride, sodium hypophosphite, sodium citrate, and ammonium chloride at elevated temperature. The uniform functional polymer particle could be obtained by seeded polymerization. To investigate the effect of surface functionality on the conditions for nickel deposition, the polymer particle was functionalized with the thiol group. From morphological observation, it was found that the mode of nickel deposition was greatly dependent on the surface functionality of the polymer particle. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 420–424, 2003     

黄荆提取物对几种害虫的杀虫活性

研究了黄荆种子二氯甲烷提取物对5种害虫的杀虫活性以及对天敌异色瓢虫的安全性。结果表明：黄荆提取物对菜青虫、小菜蛾、麦长管蚜和桃蚜都有较高的杀虫活性，尤其是对菜青虫的活性最高，稀释100倍，处理4龄幼虫死亡率可达93．3％。但对大猿叶甲的杀虫活性则很低。黄荆提取物对异色瓢虫幼虫有一定的杀虫活性，但对其成虫无任何影响。本研究结果为开发利用这一新的杀虫植物资源提供了依据。     

Effects of the reinforcement and toughening of acrylate resin/CaCO3 nanoparticles on rigid poly(vinyl chloride)

Novel composite particles based on nanoscale calcium carbonate (nano‐CaCO₃) as the core and polyacrylates as the shell were first synthesized by in situ encapsulating emulsion polymerization in the presence of the fresh slush pulp of calcium carbonate (CaCO₃) nanoparticles. Subsequently, these modified nanoparticles were compounded with rigid poly(vinyl chloride) (RPVC) to prepare RPVC/CaCO₃ nanocomposites. At the same time, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were investigated, and the synergistic effect of modified nanoparticles with chlorinated polyethylene (CPE) was also studied. The results showed that in the presence of nano‐CaCO₃ particles, the in situ emulsion polymerization of acrylates was carried out smoothly, and polyacrylates successfully encapsulated on the surface of nano‐CaCO₃ to prepare the modified nanoparticles, breaking down nano‐CaCO₃ particle agglomerates, improving their dispersion in the matrix, and also increasing the particle–matrix interfacial adhesion. Thus, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were very significant, and the cooperative effect of the nanoparticles with CPE occurred in the united modification system. Scanning electron microscopy analyses indicated that large‐fiber drawing and network morphologies coexisted in the system of joint modification of nanoparticles with CPE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3940–3949, 2007     

Synthesis and Morphology of TiO2 Nanotube Arrays by Anodic Oxidation Using Modified Glycerol-Based Electrolytes

Titanium dioxide (TiO₂) nanotube arrays were prepared by electrochemical anodization of titanium sheets in the glycerol 176 mL/H₂O 44 mL/NH₄F 0.5 wt% electrolytes modified with H₂SO₄ and NaAc addition. The surface morphologies, average inner diameter, and the length of the nanotube arrays changed with the solution pH in the range from 5.6 to 4.0 by adding H₂SO₄. A uniform surface morphology of the nanotubes with average inner diameter of ∼80 nm and a length of ∼1000 nm was obtained when the solution pH was 5.0. The growth rates of the nanotubes were remarkably enhanced by NaAc addition in the range of 0.04–0.14 M . With NaAc addition of 0.10 M , the length of the nanotube arrays reached 4.16 μm after an 8-h anodization, increasing 3.23 μm compared with no NaAc addition. The relationship between solution pH and growth of TiO₂ nanotubes was analyzed by current–time curves, solution electrical conductivities, and scanning electron microscopy (SEM), and the role of NaAc was also discussed based on SEM and solution electrical conductivities.     

LIQUID PHASE TRANSPORT PROPERTIES IN A HIGH PRESSURE PACKED COLUMN

A mathematical model of fluid flow and mass transfer in a packed bed was derived and used to evaluate the liquid phase axial dispersion and mass transfer coefficients under high pressure conditions. The least-squares method was used to evaluate the rate parameters from experimental breakthrough curves, and the agreement between the concentration curves predicted from rate parameters and those measured experimentally was good. Experiments were performed at 20 and 200°C with water as a solvent and nonporous soda-lime glass beads as packing. Although the axial dispersion coefficient was independent of temperature and pressure, the mass transport parameters were found to be pressure dependent.     

护肤品的功效性评价方法综述

现代科学技术,尤其是生物技术和计算机技术的飞速发展和广泛应用,给化妆品行业带来了全新的发展机遇,赋予化妆品以一定的功效性是新世纪化妆品发展的重要趋势.近20年来,人们对化妆品的要求已从洁肤、润肤为目的的基础护肤品向美白、祛皱为目的的功效性化妆品方向发展.     

Preparation and morphology of electrically conductive and transparent poly(vinylchloride)-polypyrrole composite films

Summary The chemical process of preparing poly(vinylchloride)-polypyrrole composite films with high electrical conductivity and transparency has been studied. Pyrrole has been diffused into the poly(vinylchloride) matrix in the swelling medium of n-hexane and acetone mixture. The oxidative polymerization of the diffused pyrrole in the binary solvent system of acetonitrile and methanol gives high conductivity of the polypyrrole as well as the good penetration of the oxidant into the PVC polymer matrix. The analytical testing of the composite film shows the formation of homogeneous mixture of polypyrrole and poly(vinylchloride) conductive layer within the 1.0m of thickness on the film surface. The transparency of the composite film showed about 50–60% at 500 nm. The electrical conductivity of the composite was about 20 s/cm.     

基于加权语义网和有效信息的个性化用户兴趣建模*

为了提高个性化用户兴趣建模的准确率,对用户建模过程进行了优化。在计算文档相似度时,综合考虑特征词的语义关系以及在文档中的分布情况,引入加权语义网,提高了文档相似度计算精度;在计算兴趣度权值时,引入有效信息的概念及量化方法,以解决用户兴趣类权值计算过于主观的问题,并提出具体权值算法,提高了权值计算的准确性。实验结果表明,改进的方法在用户兴趣聚类和兴趣类别权值计算的准确率上都较以往方法有较大提高。     

普通电火花成型机床加工小孔的改进方法

针对普通电火花成型机床在进行较深的小孔加工时存在的问题,对电火花成型机床进行部分改造,增加一个压力循环系统,使工具电极中喷出高压工作液,使之更适应小孔加工的条件.以DMKT132精密数控电火花成型机床的改造为实例,说明机床改造前后加工小孔的变化,结果表明,用该方法加工小孔,加工效率平均提高一倍以上,提高了加工质量,具有广泛的推广价值.