一次低烧SrTiO3基晶界层电容器的研究

研究了以Ｌｉ２ＣＯ３为助烧结剂、Ｓｒ（Ｌｉ１／４Ｎｂ３／４）Ｏ３为施主掺杂剂、Ｂｉ２Ｏ３和ＳｉＯ２为晶界绝缘剂的ＳｒＴｉＯ３基晶界层电容器的一次低温烧成技术。初步探索了Ｔｉ／Ｓｒ比值、施主掺杂剂、绝缘剂对显微结构及介电性能的影响。在１１５０℃烧成温度下，获得了εａｐｐ〉３．５×１０＾４；ｐ〉１．０×１０＾１１Ω·ｃｍ；ｔｇδ〈１．０％；ΔＣ／Ｃ〈±５．０％（－２５￣＋８５℃）的ＳｒＴｉＯ３基晶界层     

机械力化学湿法一步制备表面修饰磷酸锌微粉

以氧化锌和磷酸为原料,以硅烷偶联剂为改性剂,采用机械力化学湿法制备微细磷酸锌并进行表面改性.用XRD、润湿角、活化指数、沉降时间等手段对产物进行表征,用FT-IR对改性粉末的结构进行分析,初步探讨了偶联剂与磷酸锌的作用机理.结果表明产物为二水和四水磷酸锌混合物;在红外区域2 800～3 000 cm-1和1 400 cm-1有偶联剂的特征吸收峰,说明偶联剂与磷酸锌之间发生了化学反应;当硅烷偶联剂添加质量分数由0增加到2%,改性产品的活化指数由0增加到98.71%,对水的润湿角由0°增加到93.21°,沉降时间由0.5 h增加到176 h,在涂料中的分散性和贮存稳定性得到改进.     

Effect of Co2+, Ni2+, Cu2+, or Zn2+ on properties of polyaniline nanoparticles

Uniform polyaniline (PANI) nanoparticles with typical sizes of about 50 nm were electropolymerized on indium tin oxide surfaces in the presence of Co²⁺, Ni²⁺, Cu²⁺, or Zn²⁺. According to shaping theory, we first suggest the reason forming PANI spherical particles. Their conductivity, UV‐vis spectra, FTIR spectra, X‐ray diffraction, and thermogravimetric analysis were investigated. The conductivities and crystallinity of PANI doped with these ions are higher than those of PANI doped with HCl (PANI/HCl). Both UV‐vis absorption spectra and FTIR spectra indicate the interactions between Co²⁺, Ni²⁺, Cu²⁺, or Zn²⁺ and PANI chains. TG analysis also shows that the thermal stability of PANI doped by Co²⁺, Ni²⁺, Cu²⁺, or Zn²⁺ is lower than that of PANI/HCl. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

污泥中总磷测定方法的探讨

污泥样品与氢氧化钠熔融,使污泥中含磷有机化合物全部转化为可溶性的正磷酸盐,然后测定污泥中的总磷含量.此方法方便易行,平行性好,准确度高,可作为测定污泥中总磷的标准方法.     

MFE环氧乙烯基酯树脂固化性能的研究

本文对MFE环氧乙烯基酯(含MFE型和AFE型二种型号)树脂的固化性能(凝胶时间、放热峰和固化收缩率)作了报道并进行讨论。     

在工程设计中采用循环流化床锅炉必须做好调查研究工作

本文概述了循环流化床锅的现状及发展,针对普遍存在的问题,指出在工程设计采用这类锅炉时,必须做好调查研究工作,向用户提供优质服务。     

甲酸钠法保险粉精馏效果的改进措施

针对安徽氯碱化工集团保险粉精馏系统存在的问题进行分析,采取控制措施,将亚硫酸钠加以回收,降低蒸汽消耗,使精馏塔工作状况趋于正常。     

豆油脚脂肪酸制备松香改性醇酸树脂的配方研究

利用豆油脚脂肪酸-松香-甘油-苯酐，采用脂肪酸法制备松香改性醇酸树脂。通过实验得到较佳工艺条件，确定经济合理的配方和各种原料用量，制备出符合标准的醇酸树脂产品，为加工成各色醇酸调合磁漆和脂肪酸调合磁漆奠定基础。此方法有效利用了废弃的大豆下脚料以代替市场紧缺的天然桐油和亚麻油，为豆油脚在涂料工业上的开发和利用开辟了新途径。     

水煤浆在燃油热水锅炉内的燃烧试验

主要介绍了７ＭＷ燃油热水锅炉改烧水煤浆的改造设计，水煤浆炉前系统的调试，锅炉改造后的调试和水煤浆燃烧试验的结果。     

A novel high-performance counter electrode for dye-sensitized solar cells

A novel Pt counter electrode for dye-sensitized solar cells (DSC) was prepared by thermal decomposition of H₂PtCl₆ on NiP-plated glass substrate. The charge-transfer kinetic properties of the platinized NiP-plated glass electrode (Pt/NiP electrode) for triiodide reduction were studied by electrochemical impedance spectroscopy. Pt/NiP electrode has the advantage over the platinized FTO conducting glass electrode (Pt/FTO electrode) in increasing the light reflectance and reducing the sheet resistance leading to improve the light harvest efficiency and the fill factor of the dye-sensitized solar cells effectively. The photon-to-current efficiency and the overall conversion efficiency of DSC using Pt/NiP counter electrode is increased by 20% and 33%, respectively, compared to that of using Pt/FTO counter electrode. Examination of the anodic dissolution and the long-term test on the variation of charge-transfer resistance indicates the good stability of the Pt/NiP electrode in the electrolyte containing iodide/triiodide.