Characterization of O157:H7 and other Escherichia coli isolates recovered from cattle hides, feces, and carcasses

In a previous study, the seasonal prevalence was reported for stx+ Escherichia coli O157:H7 in feces and on hides and carcasses of cattle at processing. Overall, 1,697 O157:H7 isolates have now been characterized for the incidence of (i) eae(O157), hlyA, stx1, and stx2 in the recovered isolates and (ii) presumptive rough and presumptive nonmotile isolates. Seven O157:H7 isolates (0.4%) lacked stx genes, although they carried eae and hlyA. All but one of the isolates carried both eae and hlyA. Approximately two-thirds of the isolates (64% when one isolate per sample was considered) carried both stx1 and stx2. E. coli O157:H7 cells that harbored both stx1 and stx2 were more often recovered from hides in the fall (79% of the fall hide isolates) and winter (84% of the winter hide isolates) than in the spring (53%) and summer (59%). Isolates recovered from preevisceration carcasses showed a similar but not statistically significant trend. Twenty-three of the 25 O157:H7 isolates carrying stx1 but not stx2 were recovered during summer. Fifteen presumptive rough and 117 presumptive nonmotile stx+ O157:H7 isolates were recovered. Ten (67%) of the presumptive rough isolates were recovered during summer. Ninety-five of the presumptive nonmotile isolates (81%) were recovered during fall. Forty-eight percent of the false-positive isolates (175 of 363) tentatively identified as O157:H7 were O157+ H7- and lacked eae(O157), hlyA, and stx. These data suggest that in beef processing samples (i) there are minor seasonal variations in the prevalence of stx genes among E. coli O157:H7 isolates, (ii) presumptive rough and presumptive nonmotile stx+ O157:H7 isolates are present, (iii) E. coli O157:H7 isolates lacking stx genes may be rare, and (iv) O157+ H7- isolates lacking stx genes can result in many false-positive results.     

基于主题聚焦模型的PageRank改进算法

通过研究传统的超链接分析算法PageRank及其改进算法TSPR(topic-sensitive PageRank)和MP-PageRank的不足,提出了一种新的改进方法,基于主题聚焦模型的PageRank算法.这种算法研究用户查询行为,建立主题聚焦模型,较好地解决了PageRank主题漂移问题以及其他改进算法依赖查询上下文的缺点.更加准确地反映出页面的重要性,提供更高质量的查询结果集.     

Development and evaluation of an on-line hide decontamination procedure for use in a commercial beef processing plantt

The hides of cattle are the source of Escherichia coli O157:H7 that contaminates beef carcasses during commercial beef processing. Therefore, effective interventions that reduce hide contamination should reduce subsequent carcass contamination. The first objective of this study was to identify the most effective reagents for decontamination of beef hides. Cattle hides draped over barrels were used for in vitro experiments to compare the efficacy of washes using 1.6% sodium hydroxide, 4% trisodium phosphate, 4% chlorofoam, or 4% phosphoric acid, each followed by a rinse step using either water or acidified (pH 7.0) chlorine at 200 or 500 ppm. All treatments using a water rinse reduced hide coliform counts by 1.5 to 2.5 log CFU/ 100 cm2. Compared with water rinses, 200 and 500 ppm acidified chlorine rinses increased efficacy by approximately 1.0 and 2.0 log CFU/100 cm2, respectively. Vacuuming of the treated areas to remove excess liquid improved hide cleanliness by an average of an additional 1.0 log CFU/100 cm2. The second objective was to evaluate the use of an on-line hide-wash cabinet that used a sodium hydroxide wash and a chlorinated (1 ppm) water rinse. Hides sampled before entering and after exiting the cabinet had aerobic plate counts and Enterobacteriaceae counts that were reduced by 2.1 and 3.4 log CFU/100 cm2, respectively, and the prevalence of E. coli O157 on hides was reduced from 44 to 17% when the cabinet was in use. Preevisceration carcass aerobic plate counts and Enterobacteriaceae counts were both reduced by 0.8 log CFU/100 cm2, and the prevalence of E. coli O157 on preevisceration carcasses was reduced from 17 to 2% when the cabinet was in use. These results support decontamination of hides as an effective means to reduce pathogen contamination of cattle carcasses during processing.     

Effect of platinum salt concentration on the electrospinning of polyacrylonitrile/platinum acetylacetonate solution

The preparation and characterization of electrospun polyacrylonitrile (PAN)/platinum(II) acetylacetonate composite nanofibers were investigated. The solution properties, such as viscosity, surface tension, and conductivity, of Pt‐acetylacetonate‐added PAN solutions in N,N‐dimethylformamide were measured, and their influences on the resulting fiber structure were also determined. At low Pt salt concentrations, the addition of Pt salt increased the fiber diameter but did not change the fiber diameter distribution. However, the fiber diameter decreased, and the fiber diameter distribution became broader when the Pt salt concentration went beyond a critical value. The structure of the electrospun fibers was determined by the formation of polymer–salt– solvent interactions, which changed the balance among the viscosity, surface tension, and conductivity of the solutions. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

A facile approach to fabricate porous nylon 6 nanofibers using silica nanotemplate

Porous Nylon 6 nanofibers were prepared using silica nanoparticles as the template. Firstly, Nylon 6/silica composite nanofibers were prepared as precursors by electrospinning Nylon 6 solutions containing different contents of silica nanoparticles. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to examine the surface morphology and the inner structure of composite nanofibers; where it was found that silica nanoparticles were distributed both inside and on the surface of nanofibers. Analytical techniques [Fourier transform infrared (FTIR), differential scanning calorimetry, thermal gravimetric analysis (TGA), and wide‐angle X‐ray diffraction) were used to study the structure and properties of these composite nanofibers. The glass transition, melting, and crystallization processes of the fibers were affected by the addition of silica nanoparticles. Secondly, porous Nylon 6 nanofibers were obtained by removing silica nanoparticles via hydrofluoric acid treatment. The removal of silica nanoparticles was confirmed using FTIR and TGA tests. SEM and TEM observations revealed the formation of the porous structure in these nanofibers. After the formation of the porous structure, Brunauer–Emmett–Teller specific surface areas of nanofibers were increased as compared to solid Nylon 6 and composite nanofibers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

基于自主BIM平台的装配式建筑设计系统研发

项目组主要研究将BIM技术应用于装配式建筑设计的数字化和智能化设计方法,基于自主PKPM-BIM平台,开发符合国内设计习惯和工作流程的装配式设计软件PKPM-PC.PKPM-PC结合PKPM结构设计软件,提供了预制混凝土构件的脱模、运输、吊装过程中的计算工具,实现整体结构分析及相关内力调整、连接设计、预制构件库的建立、三维拆分与预拼装、碰撞检查、构件详图、材料统计等功能,同时BIM数据可直接接力到生产加工设备.为广大设计和生产企业提供专业软件,保证装配式结构设计安全度,提高设计效率和质量,助力建筑工业化发展.     

Electrospun ultrathin nylon fibers for protective applications

Electrospun nylon 6 fiber mats were deposited on woven 50/50 nylon/cotton fabric with the motive of making them into protective material against submicron‐level aerosol chemical and biological threats. Polymer solution concentration, electrospinning voltage, and deposition areal densities were varied to establish the relationships of processing‐structure‐filtration efficiency of electrospun fiber mats. A high barrier efficiency of greater than 99.5% was achieved on electrospun fiber mats without sacrificing air permeability and pressure drop. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

硅藻土改性对工业废水降氟效果的影响研究

从研究硅藻土的微观结构和物理化学特性着手，通过对比实验，讨论硅藻土的改性及其对工业废水降氟效果的影响，结果表明，改性后的硅藻土孔体积和比表面积增大，而堆积密度减少，同时碱金属或碱土金属被结合在硅藻土的缺损表面上，为吸附氟提供了更好的条件，可以显著地提高去氟效果，是工业废水降氟较为理想的净化剂。     

不同缓冲层对GaAs基In_(0.3)Ga_(0.7)As材料特性的影响

采用组分跳变和低温大失配缓冲层技术在GaAs衬底上外延了In0.3Ga0.7As材料。测试结果表明,采用组分跳变缓冲层生长的In0.3Ga0.7As主要依靠逐层间产生失配位错来释放应力,并导致表面形成纵横交错的Cross-hatch形貌;而采用低温大失配缓冲层技术则主要通过在低温缓冲层中形成大量缺陷来充分释放应力,并在后续外延的In0.3Ga0.7As表面没有与失配位错相关的Cross-hatch形貌出现。此外,仅需50nm厚的低温大失配缓冲层即可促使In0.3Ga0.7As中的应力完全释放,这种超薄缓冲层技术在工业批产中显得更为经济。