不依赖日志文件的Oracle数据库综合检验工具开发

本文设计了一款不依赖日志文件的oracle数据库综合检验、恢复工具。该工具可从oracle数据文件（＊.dbf）中检测出所有数据表（包括＂被删除＂数据表）的详细信息,例如表名称、字段名、字段类型、字段长度、字段序号和表数据实际保存的数据块号。该工具可在日志文件被清除的情况下直接从数据文件中恢复出被删除的记录,准确率达到100%。该工具可从数据文件中恢复出某些＂被删除＂的数据表。     

MTOL网络接入流程及接入失败分析

本文主要分析MTOL的接入流程,是从移动台发起呼叫请求到通话建立的过程,在这个过程中会有多种多样的原因导致接入失败,本文重点分析移动台是如何接入网络的,以及在无线侧导致接入失败的原因,并以2009年2月DT测试为样本,选取典型事件,对接入异常事件做一个简单TOPN分析并提出解决建议。     

CGA560增强助磨剂在水泥粉磨中的应用研究

研究了CGA560增强助磨剂在水泥粉磨中对台时产量和水泥质量的影响。试验结果表明:在磨机状况不改变的条件下,CGA560增强助磨剂的加入可提高磨机产量10%-30%;同时可有效减少过粉磨现象,优化水泥颗粒级配,提高了水泥粉磨细度及比表面积;因而使水泥强度等性能得到了明显改善和提高。     

Morphological characterization of the core–shell latex particle by transmission electron microscopy and image analysis

To describe the morphology of the core–shell latex particle of methyl methacrylate–butadiene–styrene graft copolymer (MBS) quantitatively, we propose four parameters, that is, the diameter of the core, the shell thickness (TH), the roundness of the core, and the eccentricity (E); we calculated these parameters with geometrical parameters determined by the analysis of transmission electron microscope images. The mean values and distributions of the four parameters based on a certain amount of particles were used for quantitative characterization of MBS latex samples. With increasing monomer‐to‐polymer ratios of the graft polymerization, both the MBS TH and the numbers of homopolymer particles increased, and the core–shell morphology tended to be irregular. For the MBS latices derived from poly(styrene–butadiene) latex with a wide distribution of particle sizes, the core–shell structures of the larger particles were different from those of smaller ones to a certain extent, and both the TH and the E decreased with increasing core size. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 855–861, 2003     

Synchronization in heterogeneous networks of discrete‐time introspective right‐invertible agents

This paper studies output synchronization problem, formation problem, and regulated synchronization problem for a heterogenous network of discrete‐time introspective right‐invertible agents. We first propose a decentralized control scheme to solve the output synchronization problem for a set of communication topologies. Moreover, if the synchronization trajectories are assumed to be bounded, a universal controller can be constructed for all communication topologies, which contain a directed spanning tree. The design can be applied to solve the formation problem with arbitrary formation vectors. In the regulated synchronization problem, we assume only the root receives information from exosystem. We then design a decentralized controller to solve the problem for a set of communication topologies. Copyright © 2013 John Wiley & Sons, Ltd.     

氨内参比法测定尿素熔融液中缩二脲含量

研究了尿素熔融液中缩二脲含量测定时各种消除氨干扰的方法，确定了氨内参比法可作为消除氨干扰的最佳方法，完善了该法应用时的具体操作步骤，建立了一个适用于尿素合成各工段尿液中缩二脲含量测定的简单、快速、准确的分析方法。     

纳米级无机粒子对聚乙烯的增强与增韧

对μｍ级ＣａＣＯ３、ＴｉＯ２和ｎｍ级ＳｉＣ／Ｓｉ３Ｎ４粒子填充ＬＤＰＥ的性能进行了研究。实验证明，μｍ级粒子对ＬＤＰＥ虽无明显的增强增韧作用，但也未使基体的机械性能大幅度下降。ｎｍ级ＳｉＣ／Ｓｉ３Ｎ４对ＬＤＰＥ有较大的增强增韧作用，在５％质量分数时冲击强度出现最大值，缺口冲击强度达５５．７ｋＪ／ｍ２为纯ＬＤＰＥ的２０３％；伸长率到６２５％时仍未断裂，为纯ＬＤＰＥ的５００％，但熔体流动速率急剧下降，仅为纯ＬＤＰＥ的２６％，当含量在３％和１５％质量分数时，熔体流动速率分别为纯ＬＤＰＥ的３３７％和１５１％。     

A new result on the delay‐dependent stability of discrete systems with time‐varying delays

This paper proposes an improvement to the delay‐dependent stability of discrete systems with time‐varying delays. The approach is based on the observation that the positive definiteness of a chosen Lyapunov–Krasovskii functional does not necessarily require all the involved symmetric matrices to be positive definite, which has been overlooked in the literature. The derived delay‐dependent stability conditions are in terms of linear matrix inequalities. It is theoretically proved that our results are less conservative than the corresponding ones obtained by requiring the positive definiteness of all the symmetric matrices in a chosen Lyapunov–Krasovskii functional. The importance of the present approach is that a great number of delay‐dependent analysis and synthesis results obtained by the aforementioned requirement in the literature can be improved by the present approach without introducing any new decision variables. Copyright © 2013 John Wiley & Sons, Ltd.     

有机-无机(硅溶胶)复合涂料的制备

有机-无机(硅溶胶)复合涂料，既具有硅溶胶耐候性好、硬度高、附着力强、耐水、耐碱、耐沾污等特点，又具有有机聚合物成膜性好、韧性大、光泽高等特点。本法选用江阴国联化工有限公司生产的交联改性的苯乙烯-丙烯酸酯乳液与硅溶胶通过物理混拼法，并辅以适当的颜填料、助剂制备的涂料，可作为外墙封闭型底漆用于水泥砂浆、混凝土等硅酸盐基材及用于外墙装饰。文章还述及制备工艺及注意事项。     

玻纤增强聚脂弯管应变导纳试验研究及其动应力分析

探讨了测定玻纤增强聚脂弯管应变导纳的试验方法。给出了力通道和应变通道的标定曲线。确定了玻纤聚脂弯管的第一、第二阶模态频率和阻尼比以及单位力幅下的动应变值。借助应变导纳的幅频特性和相频特性分析了弯管动应力。还用静态试验验证了动态测试的正确性