椭球反射镜膜厚均匀性

本文分析了椭球反射镜膜层厚度均匀性对反射率的影响,从理论上得到膜厚计算公式。根据计算的膜厚分布设计了遮蔽板,获得较好的反射特性。     

底敞口充气浮箱研究和试验

提出底敞口充气浮箱的结构和概念。经模型模拟试验研究分析，经典浮力定律可用于这种浮箱的浮力计算；其动充气状况还具有一定的允许伤损面积。它的研究将为水陆两用车辆增大浮力，缩小外形，提高水上自下而上能力和潜驶潜伏提供具有诱惑力的工程应用前景。     

准分子激光器异步感应密封传动技术

一种新型准分子激光器循环系统中的密封传动技术，具有可耐高气压，不失耦，不使用昂贵强磁材料，结构简单等优点，虽有涡流损失过大之不足，但能很好地适用于小功率下运行。     

二烷基硫代磷酸铵的捕收性能

本文研究了二烷基硫代磷酸铵（ＲＯ）２ＰＳＯＮＨ４（Ｒ＝乙基、丁基、己基、烯丙烯）系列捕收剂对非硫化矿孔雀石、锡石、赤铁矿、白铅矿、方解石和菱锌矿的浮选性能，并就药剂结构与性能关系进行了分析讨论．     

Quantum-mechanical reaction rate constants from centroid molecular dynamics simulations: Barrier crossing in an asymmetrical double-well

Quantum-mechanical reaction rate constants were calculated from centroid molecular dynamics (CMD) simulations, for the case of barrier crossing in an asymmetrical double-well potential bilinearly coupled to a harmonic bath. The calculation is based on a recently proposed formulation of the reaction rate constant in terms of the position—flux correlation function, which can be approximated via CMD in a well-defined manner. The predictions of CMD and various simplified versions of it are compared to exact results, which were obtained via the quasi-adiabatic propagator path integral (QUAPI) method, and/or path integral quantum transition state theory (PI-QTST). The predictions based on CMD are found to be in good agreement with both.     

Hydrothermal Synthesis of Acicular Lead Titanate Fine Powders

A pure, acicular lead titanate (PbTiO₃) fine powder with a white color has been prepared by hydrothermal synthesis. It is a new phase of PbTiO₃ with I 4 symmetry, cell parameters of a = 12.358 Å and b = 14.541 Å, and a density of 6.80 g.cm⁻³. The influences of pH (12.5 to 14.4), Pb/Ti ratio (1.0 to 1.6) in the feedstock, reaction temperature (130° to 230°C), time (0.25 to 4 h), starting materials, and additives on the formation of acicular PbTiO₃ under hydrothermal conditions have been investigated. The acicular PbTiO₃ with I 4 symmetry, referred to as the PX phase, can be converted to the perovskite-type (PE phase) of PbTiO₃ at about 605°C while its acicular morphology is essentially unchanged. The preferable conditions for preparing pure acicular PX-phase PbTiO₃ are that the pH is 13.0 to 14.0, Pb/Ti ratio is >1.3, reaction temperature is 170° to 200°C, time is 0.5 to 1.0 h, titanium butoxide (Ti[O(CH₂)₃CH₃]₄) is the starting material, and poly(vinyl alcohol) is an additive. The acicular grain of the PX phase is usually less than 100 nm in diameter and more than 1000 nm in length.     

界牌水电厂1号发电机定子改造铁损试验

针对界牌水电厂1号发电机多次出现的定转子轻微扫膛现象,对其进行检修,详细介绍了改造后的定子铁损试验前的准备、试验方案的确定、试验过程以及试验结果。图2幅,表2个。     

井下气液分离及回注技术研究现状分析

气井产水量的不断增加对天然气生产构成严重威胁，其影响越来越受到人们的关注和重视。使用井下气液分离及回注技术，可以降低举升和处理费用，增加生产寿命，提高采收率，减少环境污染，简化地面分离设备，提高投资效益。针对井下分离及回注技术研究现状进行了分析，给出了并下气液分离及回注形式、适用条件和技术设计、应用方面的结论。     

用COEFGN程序实现Eclips系统对RFT仪器的温度校正

Eclips测井系统对阿特拉斯生产的FMT仪器进行温度校正的20个主刻度数据都是浮点数据，利用COEFGEN程序产生的浮点校正数据输入到Eclips测井系统中对RFT进行温度校正，把RFT仪器的温度压力关系的十进制主刻度数据转换成Eclips测井系统对FMT仪器进行温度压力校正的浮点数据，对RFT仪器所测的泥浆柱压力值和地层压力值进行了实时测井校正，并分析了校正前后的误差。