Pore size control of porous silica by sol-gel process

Porous silica glass was prepared by sol-gel process from tetraethoxysilane (TEOS). The effects of solvents (water, ethanol), drying condition, heat treatment temperature on specific surface area and pore size distribution of porous silica were investigated. Gelation process accelerates with an increase of H₂O content, while retards with the increase of ethanol amount. Structure changes during heat treatment were studied by means of DTA, XRD. TEM micrographs show that the gel particles shrink after heated at 500°C, thus the average pore size decreases.     

Finite Element Analysis of a Moving Boundary Value Problem

A finite element formulation and the solution of a set of nonlinear coupled heat and mass transfer equations for a two-phase system with a moving evaporation interface is presented. The interface condition takes into account the moisture transfer balance at the moving boundary. The finite element results were compared with existing results for a single phase system for model validation. In the two-phase system, the movement of evaporation front has an appreciable effect on the temperature and moisture distribution inside the porous medium during drying. The effect of the nondimensional heat of vapourization parameter γ on the evaporation front, temperature and moisture distribution in porous medium was studied. The higher the value of γ, the slower is the movement of the evaporation front. The temperature decreased and the moisture content increased as the nondimensional vapourization parameter γ increased. This model has potential applications in studying the heat and mass transfer characteristics in food and biomaterials.     

The influence of the alloying elements upon the transformation kinetics and morphologies of ferrite plates in alloy steels

A series of Fe-C-X and Fe-C-X₁-X₂ alloys in which X, X₁ and X₂ either raise or depress the activity of C iny were investigated by autodilatometer, optical microscopy, and transmission electron microscopy (TEM) to reveal the relations among the chemical composition, transformation kinetics, and morphology of ferrite plates. The incubation time of austenite decomposition at the nose temperature in the time-temperature-transformation (TTT) diagrams, the concentration of C in y in contact with theα/gg boundary, and the growth rate of ferrite were evaluated to estimate the magnitude of the solute drag-like effect (SDLE) for the different alloying elements used. All the results are consistent qualitatively with the SDLE hypothesis. This article is based on a presentation made at the Pacific Rim Conference on the “Roles of Shear and Diffusion in the Formation of Plate-Shaped Transformation Products,” held December 18-22, 1992, in Kona, Hawaii, under the auspices of ASM INTERNATIONAL’S Phase Transformations Committee.     

Mobility modeling, location tracking, and trajectory prediction inwireless ATM networks

Wireless ATM networks require efficient mobility management to cope with frequent mobile handoff and rerouting of connections. Although much attention has been given in the literature to network architecture design to support wide-area mobility in public ATM networks, little has been done to the important issue of user mobility estimation and prediction to improve the connection reliability and bandwidth efficiency of the underlying system architecture. This paper treats the problem by developing a hierarchical user mobility model that closely represents the movement behavior of a mobile user, and that, when used with appropriate pattern matching and Kalman filtering techniques, yields an accurate location prediction algorithm, HLP, or hierarchical location prediction, which provides necessary information for advance resource reservation and advance optimal route establishment in wireless ATM networks     

A study on the anodic protection of Titanium evaporators in Al2(SO4)3 solution

The feasibility of the anodic protection of titanium evaporators in Al₂(SO₄)₃ solution was studied by the measurement of polarization curves, weight loss, solubility of passive film and AC impedance. The protection parameters and efficiency were determined. In addition, the practical technology of anodic protection was studied by screening reference electrodes and auxiliary cathodes. Throwing power was also measured. Four rows of tube-type evaporators of titanium have been anodically protected in situ. Field tests lasting more than one year show satisfactory results.     

Effect of pentobarbital on normal brain protection and on the response of 9L rat brain tumor to radiation therapy

The authors attempted to confirm published reports that pentobarbital protects against radiation-induced damage to normal rat brain, as well as enhances radiotherapeutic efficacy in a rat brain tumor model. They evaluated animal survival in 9L gliosarcoma-burdened rats that received whole-brain radiation therapy (16, 24, 32, or 40 Gy) while under intraperitoneal pentobarbital (60 mg/kg) or intramuscular ketamine (60 mg/kg) sedation. The animals were examined at autopsy to attribute death to either intracranial tumor growth or normal brain toxicity in the absence of discernible tumor. There was no difference between the two anesthesia groups regarding the survival of unirradiated animals. Radiation therapy produced a significant dose-dependent prolongation in animal survival, which was limited by the development of normal tissue toxicity at the higher doses. When compared to ketamine anesthesia, pentobarbital anesthesia appeared to offer some protection (not statistically significant) against early (but not late) toxicity at selected radiation doses. A reduction in the number of deaths from tissue toxicity suggested an increased antitumor effect, but again this was not statistically significant. Only in one case was there even a marginal significant difference (p = 0.045) between overall therapeutic efficacy in rats sedated with pentobarbital versus ketamine. While there may be a radioprotective effect of pentobarbital in rat brains without intracranial tumor, there is no conclusive evidence for either radioprotection or significant improvement of radiotherapeutic efficacy in this 9L rat brain tumor model.     

A novel DNA duplex. A parallel-stranded DNA helix with Hoogsteen base pairing

We show here for the first time that a stable parallel double helix with Hoogsteen pairing can exist independently of the triple helix of which it is a component part. The experiments employ DNA oligonucleotides with mixed sequences of normal bases. These duplexes are distinct from previously reported ribopolynucleotide helices containing bulky substituents which prevent Watson-Crick pairing as well as from parallel duplexes with Donohue, or reversed Watson-Crick, pairing. Stoichiometry is established by mixing curves and gel electrophoresis. Tm depends linearly upon pH, increasing with acidity because of the need to protonate N3 of C. The Tm of the 20-mer studied here is 52 degrees C at pH 5.2 and 0.1 M NaCl. At pH above 6, the molecule rearranges to form an antiparallel duplex with imperfect Watson-Crick pairing and loops, and the Tm is then independent of pH. The CD spectrum of the parallel duplex is very similar to that of the corresponding triple helix but quite different from that of the Watson-Crick helix. The infrared spectrum in the double bond region closely resembles that of the triple helix but, as with the CD, is quite different from that of the Watson-Crick duplex. The infrared spectra of the duplex and triple helix are also nearly identical in the region form 800 to 1000 cm-1, which is sensitive to backbone conformation. The only symmetry element present is a pseudorotational axis coincident with the helix axis of the parallel duplex as well as with the axis of the corresponding triple helix.(ABSTRACT TRUNCATED AT 250 WORDS)     

A maximum torque control with a controlled capacitor for asingle-phase induction motor

This paper presents a new method to achieve a maximum torque for a single-phase induction motor. An AC adjustable capacitor using an electronic switch in parallel with a capacitor is proposed. The capacitor is short-circuited in a different period by an electronic switch during each cycle to vary the effective value of the AC capacitor. Two new optimization algorithms, which obtain a maximum starting torque by adjusting the effective capacitor, are proposed. No starting capacitor or centrifugal switch is used here. A theoretical analysis, and simulated and experimental results are presented in this paper