用于自动测试系统继电器矩阵开关的设计

针对目前现有的矩阵开关在性价比、可靠性以及通用性等方面不尽如人意,无法满足中小型自动测试系统的实际要求这一问题;设计了一种用于自动测试系统的继电器矩阵开关,给出了其设计原理、硬件电路图以及主程序流程图;系统搭建完成后,进行8次独立重复试验,测试结果显示:该继电器矩阵开关测试数据的最大误差为±0.3％,同时具有性价比高、通用性好、可靠性较高等优点,特别适合于中小型测试系统的电源通道和信号通道的切换与控制.     

基于Shannon熵的飞机交流发电机振动分析

飞机交流发电机是飞机关键部件之一,监测其健康状况具有重要意义。通过设计实验数据获取平台采集交流发电机在转速上升(从6000转/分到8500转/分)、平稳运行(7500转/分)及转速下降(8500转/分到6000转/分)三个阶段的振动信号,利用符号序列Shannon熵的计算方法以及符号化方法设定合适参数对振动信号进行了处理,得出了交流发电机在三个阶段的振动信号的Shannon熵;通过初步的分析表明,交流发电机在正常状态下三个阶段的Shannon熵都比较有规律的在一定范围内变化,一旦发生振动异常将会引起Shannon熵突变;经过分析讨论,Shannon熵的突变与否是可以用来反映交流发电机在机械方面是否存在故障隐患的。     

Dispersion in Disks

We present three new approximation algorithms with improved constant ratios for selecting n points in n disks such that the minimum pairwise distance among the points is maximized.

1. A very simple O(nlog?n)-time algorithm with ratio 0.511 for disjoint unit disks.
2. An LP-based algorithm with ratio 0.707 for disjoint disks of arbitrary radii that uses a linear number of variables and constraints, and runs in polynomial time.
3. A hybrid algorithm with ratio either 0.4487 or 0.4674 for (not necessarily disjoint) unit disks that uses an algorithm of Cabello in combination with either the simple O(nlog?n)-time algorithm or the LP-based algorithm.

The LP algorithm can be extended for disjoint balls of arbitrary radii in ? ^d , for any (fixed) dimension d, while preserving the features of the planar algorithm. The algorithm introduces a novel technique which combines linear programming and projections for approximating Euclidean distances. The previous best approximation ratio for dispersion in disjoint disks, even when all disks have the same radius, was 1/2. Our results give a positive answer to an open question raised by Cabello, who asked whether the ratio 1/2 could be improved.     

Stability of Impulsive Stochastic Neutral Partial Differential Equations With Infinite Delays

In this paper, we study the existence and asymptotic stability in the pth moment of the mild solutions to impulsive stochastic neutral partial differential equations with infinite delays. Sufficient conditions ensuring the stability of the impulsive stochastic system are established. The results are obtained via the Banach fixed point theorem.     

Preparation and properties of close-packed composite materials

Monodisperse silica particles of about 0.3m diameter are suspended in methacrylate monomer using a carefully selected dispersant. Many steric dispersants are hydrocarbon chains with a reactive end-group. These are not effective as dispersants for silica in moderately polar solvents, such as esters and the methacrylate monomers. Good dispersion was obtained with a methacrylate polymer terminated by a chlorosilane end group. Settling or centrifugation of these unagglomerated dispersions gives well-packed particle beds. Polymerization of the surrounding monomer produces composite materials with high packing fractions and a high degree of regularity. Moduli and strengths of these composites are reported.     

物联网技术发展研究

本文介绍了物联网的产生及发展现状,对物联网的结构体系和相关技术做了详细阐述,最后对物联网技术发展中存在的问题和应用前景进行了分析研究。     

《自动控制原理》课程中闭环脉冲传递函数算法研究

针对一般方法推导离散系统闭环脉冲传递函数过程繁琐费时的问题,给出一种先连续化求出闭环传递函数再离散化求解的简便方法,并给出使用本方法的单一化条件。对于满足该条件的系统,可直接求用简便方法求取系统的闭环脉冲传递函数,不满足该使用条件的系统,对其中间变量的求取可使用本方法,因而大大简化求解闭环脉冲传递函数的过程,为采样控制系统的分析和设计提供了很大的方便。     

Adsorption characteristics of hexadecyl ammonium with different numbers of carbon chains in montmorillonite and the structure of the prepared composites

Journal of Porous Materials - The dynamics and thermodynamics of adsorption of hexadecyl ammonium with different numbers of carbon chains in montmorillonite (Mt) with different layer charge density...     

AN EXPERIMENTAL-NUMERICAL METHOD FOR MEASURING CRACK PROPAGATING VELOCITIES UNDER STRESS WAVE LOADING

An experimental-numerical method for measuring dynamic crack propagating velocities under stress wave loading is established in this paper. The experiments of the three-point bend specimen are done on the improved Hopkinson bar. Deflection of loading point, dynamic load and instantaneous crack length are measured, then crack propagating velocities are calculated. Experiments on 40Cr steel show that the results given by this method have a good agreement with that obtained by the resistance fracture gage method. Therefore this method is feasible for measuring crack propagating velocities under high loading rate and will have wide application.     

基于演化算法的奇偶校验器自动设计*

基于演化算法技术,提出一种新的设计思想,实现奇偶校验器的电路自动设计.实验证明,多目标演化算法具有较少的运算量和较高的效率,能自动设计出使用逻辑门数更少、延时更小的奇偶校验器.