Fibre Bragg grating compression-tuned over 110 nm

A fibre Bragg grating with a tuning range covering beyond the C- and L-bands has been realised, which represents the broadest tuning range reported of any Bragg grating. The device exhibits constant spectral response and polarisation mode dispersion within these bands.     

Supermedia-enhanced Internet-based telerobotics

This paper introduces new planning and control methods for supermedia-enhanced real-time telerobotic operations via the Internet. Supermedia is the collection of video, audio, haptic information, temperature, and other sensory feedback. However, when the communication medium used, such as the Internet, introduces random communication time delay, several challenges and difficulties arise. Most importantly, random communication delay causes instability, loss of transparency, and desynchronization in real-time closed-loop telerobotic systems. Due to the complexity and diversity of such systems, the first challenge is to develop a general and efficient modeling and analysis tool. This paper proposes the use of Petri net modeling to capture the concurrency and complexity of Internet-based teleoperation. Combined with the event-based planning and control method, it also provides an efficient analysis and design tool to study the stability, transparency, and synchronization of such systems. In addition, the concepts of event transparency and event synchronization are introduced and analyzed. This modeling and control method has been applied to the design of several supermedia-enhanced Internet-based telerobotic systems, including the bilateral control of mobile robots and mobile manipulators. These systems have been experimentally implemented in three sites test bed consisting of robotic laboratories in the USA, Hong Kong, and Japan. The experimental results have verified the theoretical development and further demonstrated the stability, event transparency, and event synchronization of the systems.     

Super-multi-fibre PLC connector utilising angled connection between PLC and tens of fibres

A novel super-multi-fibre planar lightwave circuit (PLC) connector, designed to connect tens of optical fibres and a PLC for super-multichannel PLC-based optical modules with a receptacle interface, is proposed. This connector employs an angled connection instead of a PC connection. A 0.127 mm pitch 32-fibre connector is also demonstrated, which exhibits low connection and high return losses.     

The Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR-E), NASDA's contribution to the EOS for global energy and water cycle studies

The Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR-E) was developed and provided to the National Aeronautics and Space Administration's EOS Aqua satellite by the National Space Development Agency of Japan, as one of the indispensable instruments for Aqua's mission. AMSR-E is a modified version of AMSR that was launched December 2002 aboard the Advanced Earth Observing Satellite-II (ADEOS-II). It is a six-frequency dual-polarized total-power passive microwave radiometer that observes water-related geophysical parameters supporting global change science and monitoring efforts. The hardware improvements over existing spaceborne microwave radiometers for Earth imaging include the largest main reflector of its kind and addition of 6.925-GHz channels. These improvements provide finer spatial resolution and the capability to retrieve sea surface temperature and soil moisture information on a global basis. This paper provides an overview of the instrument characteristics, mission objectives, and data products.     

W-band waveguide photomixer using a uni-traveling-carrier photodiode with 2-mW output

Developed a W-band (75-110 GHz) waveguide photomixer with a uni-traveling carrier photodiode, which can be driven by two 1.5-/spl mu/m lasers. It generates an output power of 2.2/spl plusmn/0.2 mW at 100 GHz with a laser power of less than 100 mW, and its relative power variation is as small as 3 dB across the entire frequency range of the W-band. A 100-GHz superconductor-insulator-superconductor receiver driven by this photomixer shows the same noise temperature around 26 K as that driven by a conventional Gunn oscillator.     

A 1-Gb/s/pin 512-Mb DDRII SDRAM using a digital DLL and a slew-rate-controlled output buffer

A 1-Gb/s/pin 512-Mb DDRII SDRAM has been developed using a digital delay-locked loop (DLL) and a slew-rate-controlled output buffer. The digital DLL has a frequency divider for DLL input, performs at an operating frequency of up to 500 MHz at 1.6 V, and provides internal clocking with 50% duty-cycle correction. The DLL has a current-mirror-type interpolator, which enables a resolution as high as 14 ps, needs no standby current, and can operate at voltages as low as 0.8 V. The slew-rate impedance-controlled output buffer circuit reduces the output skew from 107 to 10 ps. This SDRAM was tested using a 0.13-/spl mu/m 126.5-mm/sup 2/ 512-Mb chip.     

Remote sensing of suspended sediments and shallow coastal waters

Ocean color sensors were designed mainly for remote sensing of chlorophyll concentrations over the clear open oceanic areas (Case 1 water) using channels between 0.4-0.86 /spl mu/m. The Moderate Resolution Imaging Spectroradiometer (MODIS) launched on the National Aeronautics and Space Administration Terra and Aqua spacecrafts is equipped with narrow channels located within a wider wavelength range between 0.4-2.5 /spl mu/m for a variety of remote sensing applications. The wide spectral range can provide improved capabilities for remote sensing of the more complex and turbid coastal waters (Case 2 water) and for improved atmospheric corrections for ocean scenes. We describe an empirical algorithm that uses this wide spectral range to identify areas with suspended sediments in turbid waters and shallow waters with bottom reflections. The algorithm takes advantage of the strong water absorption at wavelengths longer than 1 /spl mu/m that does not allow illumination of sediments in the water or a shallow ocean floor. MODIS data acquired over the east coast of China, west coast of Africa, Arabian Sea, Mississippi Delta, and west coast of Florida are used.     

Multiple-Stokes stimulated Brillouin scattering generation in pulsed high-power double-cladding Er/sup 3+/-Yb/sup 3+/-codoped fiber amplifier

Cascaded Stokes waves generation due to stimulated Brillouin scattering (SBS) of coherent optical pulses in a double-cladding Er/sup 3+/-Yb/sup 3+/ codoped fiber amplifier is reported. The highest attainable output power strongly depends on the amplifier pumping arrangement. A maximum of 40-W peak power has been obtained in counterpumping configuration. The highest energy extracted from the single-mode fiber amplifier in 1-/spl mu/s pulses is limited SBS to 15 /spl mu/J. Theses results have been theoretically confirmed using coupled-waves SBS model.     

An accurate thin-wire model for 3-D TLM simulations

Accurate modeling of thin wires in large-scale numerical electromagnetic simulations is very time consuming if fine meshing is adopted. Special treatments of such wires to allow their incorporation into relatively coarse meshes have lead to the development of thin-wire nodes for the transmission-line matrix (TLM) method. Previous models require the use of empirical factors. A novel thin-wire node is presented that is derived from rigorous field theory, requires no empirical factors and is shown to be highly effective. Moreover, virtually no computational overhead is incurred in the use of the new wire node.     

An InGaP-GaAs HBT MMIC smart power amplifier for W-CDMA mobile handsets

We demonstrate a new linearized monolithic microwave integrated circuit smart power amplifier of extraordinary high power-added efficiency (PAE), especially at the most probable transmission power of wide-band code-division multiple-access handsets. A PAE of 21% at 16 dBm of output power, which is the maximum bound of the most probable transmission power in IS-95 systems, was obtained, as well as 40% at 28 dBm, the required maximum output power, with a single-chip MMIC power amplifier. The power amplifier has been devised with two InGaP-GaAs heterojunction bipolar transistor amplifying chains parallel connected, each chain being optimized for a different P/sub 1dB/ (1-dB compression point) value: one for 16 dBm for the low-power mode, targeting the most probable transmission power, and the other for 28 dBm for the high-power mode. The high-power mode operation shows 40% of PAE and -30 dBc of adjacent channel leakage power ratio (ACLR) at the maximum output power of 28 dBm. The low-power mode operation exhibits -34 dBc of ACLR at 16 dBm with 14 mA of a quiescent current. This amplifier improves power usage efficiency and, consequently, the battery lifetime of the handset by a factor of three.