基于概率支持向量回归的产品设计时间预测模型

为使产品设计时间预测既克服小样本、异方差噪声问题,又提供除预测值以外的其他有用信息,建立概率支持向量回归(PSVR)模型。首先,在异方差回归模型基础上设计概率约束条件,以使预测值以较大概率位于真实值的某邻域,结合具有参数不敏感损失函数的支持向量回归确定优化目标,提出PSVR。然后,将最大完工时间知识嵌入进PSVR的约束条件,用以确定真实值邻域的宽度,将交叉验证与遗传算法相结合以确定PSVR的相关参数。最后,以注塑模具设计的实例进行分析,结果表明基于PSVR的时间预测方法可同时提供有效的预测值和预测区间。     

铝箔纸胶粘剂的制备

由醋酸乙烯和丙烯酸酯所制得的共聚物，能够极大地提高乳液对铝箔和纸张之间的粘合力，通过调整保护胶体聚乙烯醇的用量和增塑剂邻苯二甲酸二丁酯在反应过程中的不同加入方式，可以控制和生产所需要的乳液粘度，流平剂的加入，则改良了乳液在铝箔上胶时的流平性。     

Internet上化学化工资源

详细介绍了Internet上的化学化工资源及域名地址。     

基于模糊神经网络的大场景人群密度估计方法 *

提出了一种估计大场景下密集人群密度的方法。该方法根据人类视觉的模糊性原理,认为用模糊集来划分人群密度范围比用确定的方法更符合人眼视知觉的认知方式,利用统计的方法确定灰度共生矩阵各指标对于各个密度类别的隶属函数;设计基于误差反向传播训练算法（BP）的模糊神经网络,计算样本模式对于各个密度类别的隶属度,并根据人群密度变化的时域连续性原理对人群密度范围进行合理估计。实验表明该方法提高了估计精度。     

Simple Preparation of Crystal Co3（BTC）2·12H2O and Its Catalytic Activity in CO Oxidation Reaction

Crystalline metal-organic framework cobalt(Ⅱ) benzenetricarboxylate Co3(BTC)2?12H2O(MOF-Co) has been prepared using solvothermal method. The reaction of cobalt(Ⅱ) nitrate and 1,3,5-benzenetricarboxylic(BTC) acid in a mixed solution of N,N-dimethylformamide(DMF)/C2H5OH/H2O(1:1:1, ν/ν) at low temperature for short reaction times produced this crystalline compound. Compared with traditional hydrothermal method, a mixed solution method for the synthesis of crystalline metal complex was found to be highly efficient. After water molecules were removed from this metal complex, its exposed nodes served as active sites. When this MOF-Co was employed in the oxidation of CO, it showed good catalytic properties causing 100% conversion of CO to CO2 at low temperature of 160 ℃.     

Finite difference method for dynamic response analysis of anchorage system简

Based on some assumptions, the dynamic analysis model of anchorage system is established. The dynamic governing equation is expressed as finite difference format and programmed by using MATLAB language. Compared with theoretical method, the finite difference method has been verified to be feasible by a case study. It is found that under seismic loading, the dynamic response of anchorage system is synchronously fluctuated with the seismic vibration. The change of displacement amplitude of material points is slight, and comparatively speaking, the displacement amplitude of the outside point is a little larger than that of the inside point, which shows amplification effect of surface. While the axial force amplitude transforms considerably from the inside to the outside. It increases first and reaches the peak value in the intersection between the anchoring section and free section, then decreases slowly in the free section. When considering damping effect of anchorage system, the finite difference method can reflect the time attenuation characteristic better, and the calculating result would be safer and more reasonable than the dynamic steady-state theoretical method. What is more, the finite difference method can be applied to the dynamic response analysis of harmonic and seismic random vibration for all kinds of anchor, and hence has a broad application prospect.     

离心铸造大口径球铁管用复合功能型脱硫剂的研制

为使硫量波动的高炉铁液能适应大型离心铸造球铁铸管生产,研制了一种成本较低廉、添加操作简单的复合功能型脱硫剂。其主要组分包括强脱[S]去[O]材料钝化镁粒、碳化钙,增加石墨核心元素Zn和膨胀集渣材料珍珠岩,以及能抑制反球化作用和净化铁液的材料等。采用冲入法进行球化处理,这种脱硫剂覆盖在球化剂和孕育剂上,使用方法简单,效果良好。     

Influencing factors on elastic-plastic deformation of multi-layered surfaces under sliding contact

Stress distribution in the gradient multi-layered surface under a sliding contact was investigated using finite element method(FEM). The main structure parameters of layered surface discussed are total layer thickness,layer number and elastic modulus ratio of layer to the substrate. A model of multi-layered surface contact with rough slider was studied. The effect of the surface structure parameters on the elastic-plastic deformation was analyzed.     

基于VC++的图形化业务流程编辑

深空测控系统工作频段多、设备量大、组成复杂及业务种类繁多,难于归纳系统的工作场景和特定工作场景下的测控流程。为了使用更加方便、灵活和提高自动化程度,需要提供流程编辑功能,以适应深空测控系统纷杂的工作场景及业务流程的变化组合。将常用的Visio图形编辑软件和VC++平台有机结合,研究了Visio控件在VC++下的二次开发方法以及业务流程的图形化抽象,实现了图形化的业务流程编辑,满足了业务流程复杂化的使用需求。     

基于图像局部结构的扩散平滑

各向异性扩散平滑去噪的主要特点是扩散方向的选择性与定向扩散能力,有效表征信号或图像的局部结构特征是各向异性扩散的基础,传统的梯度表示方法极易受到噪声干扰.该文在分析图像局部结构表征方式的基础上,定义一个图像的局部各向异性强度参数M,提出一个新的扩散方程.试验测试显示,新扩散模型相对于ALM模型与CAZ模型具有更好的噪声压制能力和定向扩散能力,信噪比分别提高了0.1 dB～0.8 dB和0.3 dB～1.2 dB.