Composite group vector space method for estimating melting and boiling point of pure organic compound

Composition Group Vector Space (CGVS) method for estimating melting and boiling point T _m , T _b of organic compound has been proposed, and the principle of this method has been elucidated. The models for estimating T _m , T _b have been established and the numerical values of relative parameters have been presented. The average percentage deviations of T _m , T _b estimation are 7.53 and 1.58, respectively, which show that the present method demonstrates significant improvement in applicability to predict the above properties, compared to conventional group methods.     

电液比例控制技术在工程船舶中的应用

以长江及沿海航道铺排工程船(长雁1号)液压系统的工程项目为背景,采用电液比例控制技术设计了一种新型的电液比例控制系统,通过对移船马达速度的控制实现了移船的移位和准确定位,同时液压系统的能耗也大大降低.     

Experimental Study on Energy Consumption of Combined Conventional and Dehumidification Drying

Conventional drying, dehumidification drying, and combined conventional-dehumidification drying of wood were experimentally studied in this article. The results showed that the energy consumption in the dehumidification drying is the least but its drying time is the longest. The energy consumption in the combined drying is more than that in the dehumidification drying but less than that in the conventional drying, and the drying time is half of that in the dehumidification drying. The advantages of the combined conventional and dehumidification drying are discussed from the experiments results.     

Study of the Mössbauer effect on rare-earth borided surface layers on pure iron

Journal of Materials Science Letters -     

用于氢化的铜铬氧化物催化剂的研究

通过铜铬氧化物催化剂用于豆油的选择氢化,研究了制备方法及氢化条件对催化剂活性的影响.在所用的五种催化剂中,以Adkins法制备的催化剂活性最好,碳酸氢铵法次之.文中还对催化剂焙烧气氛、焙烧温度、焙烧时间、铜铬原子比对催化剂活性的影响以及氢化温度、催化剂用量、搅拌速度、氢流速等对反应的影响进行了较详细的讨论.     

气体灭火自动控制装置的设计原理

通过科研成果转化的气体灭火系统目前己成为我所科技产业中的主导产品。其控制装置是其中关键配套设备。本文就其开发设计中的设计思想、技术原理、技术设计特色等作一阐述     

环境·个性:南宁市检察院建筑设计

场地环境分析南宁市检察院所处的民族大道是广西首府南宁市最主要的城市干道.自西往东.连接着旧城中心与琅东新中心区.南宁市主要的市政公建如会展中心、市人大会堂.市中级法院、市政府等均集中于琅东新区,与南湖一起已形成南宁市最富有生机的美丽的中心区域。     

提高E^2PROM中NMOS管源漏穿通电压的实验研究

为了提高Ｅ＾２ＰＲＯＭ中Ｎ管源漏穿通电压，用实验的方法对制造工艺进行了研究。结果表明，高能量注入是提高ＶＰＴ的有效手段，但受到ｐｎ结击穿的限制，只适用于低区短沟Ｎ管；ＤＤＤ工艺大幅度高ＶＰＴ，但ｐｎ结击穿电压低于２０Ｖ，不能应用于高压ＭＯＳ管；采用适量的防穿通注入和适当增大沟道长度为最理想的工艺途径。