自卸车驾驶室振动对标测试与分析

针对某厂商研制的无副梁自卸车,为验证其更换主梁后驾驶室舒适性是否有所改善,进行不同速度及路况下的驾驶室振动测试试验,并与有副梁原型自卸车进行对标,采用时域与频域数据处理方法对结果进行分析,结果显示扭曲路面下无副梁自卸车的驾驶室舒适性有所改善,但对于4Hz以下的振动,其车架的隔振效果较弱。在碎石路面与平坦路面下无副梁自卸车满载时,其车架的隔振效果要明显好于对标自卸车,但在碎石路面空载时,其隔振效果则较弱。     

水电黑启动的实现方法

以水电黑启动在重庆彭水电站的实现方法为例,对彭水电站黑启动初始状态、总体思路及其步骤进行详细论述,总结出彭水电站黑启动的重要性,同时提出实施过程中的注意事项。     

Bone Tissue Response to the Bone-like Tissue Coating on Titanium

The objective of this study was to investigate the effects of mineralized bone nodules, formed in vitro by bone marrow stromal cells(BMSCs), on the new bone formation in bone defect and on implant surface. The mineralized bone nodules were generated by culture of Lewis rats BMSCs on titanium disks in osteogenic induction medium. The gap-healing animal model was used to create the bone defect facing the disk. The titanium disks in the presence of B group or in the absence of NB group bone nodules were randomly placed into one of the rat distal femurs. This self-control design was used to compare the bone formation in defects and on titanium surface, by Micro-CT, fluorescence staining, histological and histomorphometric analysis. The new bone formation parameters in bone defect area of B group were significantly higher than those of NB group at 2 weeks, including bone volume fraction, trabecular thickness and bone area ratio. The bone nodules pre-stained with Alizarin red disappeared mostly at 2 weeks, while the red fluorescence reappeared in the newly formed bone away from the disk surface. For the bone-implant contact, B group showed lower values than NB group at 2 weeks, but no significant difference was found at 4 weeks. Our results indicate that the mineralized bone nodules can be resorbed in vivo and promote the early osteogenesis in the bone defects, and bone nodules may be applicable for new bone generation in bone defect or modification of tissue engineering scaffold.     

Global optimization for ducted coaxial-rotors aircraft based on Kriging model and improved particle swarm optimization algorithm

To improve the operational efficiency of global optimization in engineering, Kriging model was established to simplify the mathematical model for calculations. Ducted coaxial-rotors aircraft was taken as an example and Fluent software was applied to the virtual prototype simulations. Through simulation sample points, the total lift of the ducted coaxial-rotors aircraft was obtained. The Kriging model was then constructed, and the function was fitted. Improved particle swarm optimization(PSO) was also utilized for the global optimization of the Kriging model of the ducted coaxial-rotors aircraft for the determination of optimized global coordinates. Finally, the optimized results were simulated by Fluent. The results show that the Kriging model and the improved PSO algorithm significantly improve the lift performance of ducted coaxial-rotors aircraft and computer operational efficiency.     

Bioleaching of pyrrhotite by Sulfobacillus thermosulfidooxidans

The bioleaching of pyrrhotite was investigated using Sulfobacillus thermosulfidooxidans.The effects of pH,pulp concentration,inoculation amount,external addition of ferrous and ferric ions were examined.The pH is found to exert a profound effect on the leaching process for controlling the bacterial activity and precipitation of ferric ions mainly as jarosite.The results show that low pulp content increases the leaching rate of iron.The inoculation amount from 1×107 cell/mL to 1×108 cell/mL has positive effects on the leaching rate.The results also imply that addition of ferrous sulfate（1 g/L） is required for the bacteria to efficiently drive the extraction of iron,however,the leaching efficiency has no obvious enhancement when 2 g/L ferrous sulfate was added.Comparatively,addition of ferric sulfate（2 g/L） significantly inhibits the bioleaching process.At the end of bioleaching,jarosite and sulfur are observed on the surface of pyrrhotite residues by using XRD and SEM.With the passivation film formed by jarosite and sulfur,the continuous iron extraction is effectively blocked.     

以品牌专业建设为契机 抓住发展机遇 全面提高专业建设质量

专业建设是高等学校最重要的教学基本建设,是教育教学工作的基础和重要生命线,是高等学校人才培养的重要依托。加强本科品牌专业的建设可提升学校本科专业建设的整体水平,提高学校本科人才培养质量、效益和竞争力。文章围绕如何开展品牌专业建设,结合学校实际,着重从品牌专业内涵、建设原则、内容和评价办法等方面进行了阐述。     

微创业:大学生创业实践教育的思考

大学生创业实践是高校创业教育的一个难题。当前国内高校创业教育普遍存在实践教育环节薄弱、效果不显著等问题,本研究同步社会经济发展,尝试以微创业视角思考高校创业实践教育,通过梳理微创业的概念及应用,从契合大学生需求角度分析微创业具有的时代性、低门槛、大众化、创新性等特点。并根据高校实际情况,从完善微创业环境、开设微创业课程、建立微创业实践基地、提供微创业网络平台服务等方面提出推动高校大学生微创业的路径建议。     

含氮、磷有机配体对(CdSe)_2量子点结构和电子性质的影响

使用密度泛函理论方法研究了量子点(CdSe)2与配体L(L=PH3、PH2Me、PHMe2、PMe3、NH3、NH2Me、NHMe2、NMe3)之间的相互作用及其产物的结构和性质。配体中的P或N原子与Cd原子上分别形成较强的Cd—P和Cd—N配位键,从而影响(CdSe)2的结构和电子性质。配体作用下,(CdSe)2的几何结构、电荷分布、轨道能级、吸收光谱等均发生变化,但2类配体的影响,尤其是甲基数目的影响,存在较大差异。     

铜离子印迹改性壳聚糖海绵的制备及应用研究

以醋酸铜为模板,甲醇、氯仿为溶剂,2-乙烯吡啶、丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用本体聚合法制备铜离子印迹聚合物;然后掺入到壳聚糖海绵的制备中,使壳聚糖海绵对铜离子的吸附率由27．1％提高到72．3％。制备的铜离子印迹改性壳聚糖海绵需要2d达到吸附平衡,吸附-解吸5次后,性能稳定。     

VB含用户子目录安装程序设计

介绍了VB自带工具“打包和展开向导”的工作原理和过程,提出了用这个工具打包含有用户子目录程序时出现的问题,并针对这些问题设计了一个算法,通过修改“打包和展开向导”中setup1.exe的源程序,使得“打包和展开向导”在打包含用户子目录程序的过程简单而且不出现问题。