论汉学家周蕾对老舍《恋》的双向阐发

美国汉学家周蕾运用本雅明关于收藏者的理论解读老舍短篇小说《恋》,并通过对两者的互文性解读,展开对以下命题的剖析和论述:恋物的本质,《恋》的人物特征、心理冲突,老舍和本雅明对于"物"之思的异同,忠诚的命题及其生发出的取舍之精神实质、儒家传统道德观念与爱国主义等。她为中西比较文学的双向阐释在现实语境中如何操作提供了一个创造性范例。     

楔环连接结构的非线性静力学行为研究

通过静力加载实验,并结合3维接触有限元数值计算,研究了由2个筒体和2根楔带装配组成的楔环连接结构试件的非线性静力学行为。结果表明,在轴向拉伸下,当拉力增大到一定值时,楔环连接结构的总拉力-总轴向伸长就表现出非线性关系;在轴向-横向力联合作用下,在载荷增大过程中,楔带与壳体的接触位置会发生变化,从而导致口盖孔邻近区域应力集中位置也会发生一定变化,进而引起结构上应力随载荷的非线性变化。对楔环结构的这些非线性行为的认识为结构的设计和使用提供了概念指导。     

可转债融资与公司股价长期表现实证研究

实证检验了我国上市公司可转债融资后的股价长期表现,结果发现,可转债融资后的公司股价并未如配股和增发再融资后的长期表现欠佳,而是有一定的优越表现.以EBIT与Size/BM可比公司进行调整后,一年期的累积超过收益分别为13.52%和17.13%,而以大盘指数调整后的一年期累积超额收益仅为0.41%.对以Size/BM可比公司调整后的累积超额收益给予的多元回归分析发现,可转债发行后的一年期股价市场表现与初始转换概率正相关,与股权稀释因子负相关,而在统计意义上不显著,但制造业公司在可转债发行后股价的一年期市场表现优于非制造业的公司,且在10%的水平下显著.     

Improvement in the volume efficiency of multilayered ceramic capacitors (MLCCs)

An attempt was made to improve the conventional lamination process in the multilayered ceramic capacitors (MLCCs) fabrication by adapting a solvent treatment on the BaTiO₃ green sheets. During the lamination process, additional particle rearrangement in the BaTiO₃ green block was stimulated by solvent treatment. This rearrangement resulted in a more compact structure of the BaTiO₃ green sheets compared to that obtained through the conventional lamination process. The overall thickness of BaTiO₃/Ni/BaTiO₃ laminates was also reduced after solvent treatment. It is suggested that miniaturization in the fabrication of MLCCs can be improved by adapting a solvent treatment during the lamination process.     

汽轮机末级叶片水蚀防护技术

介绍了国内外常用的水蚀防护处理技术,并对其优劣性进行了对比,结果表明:堆焊硬质合金、表面涂镀氮化碳纳米复合涂层是一种较好的表面处理方法。     

C/C复合材料Mo - Si-N系抗氧化涂层成分优化

以Mo粉和Si粉为原始粉末,采用熔浆法在C/C复合材料表面原位合成了Si3N4-MoSi2/Si-SiC(MSN)系多层抗氧化涂层,借助扫描电镜和X射线衍射仪等分析手段对涂层的相组成和微观组织进行表征,并对涂层的抗氧化性能进行了初步研究.结果表明:Si浆料中添加适量Al可有效地阻止液态Si渗入C/C基材内部,3%Al-Si涂层具有最好的阻止Si渗入作用;Al含量超过3%时,Si的渗入程度随Al含量的增加而加剧;涂层中MoSi2的理论含量超过50%时,MSN-C/C复合材料1 400℃的抗氧化性能随MoSi2含量的增加而显著下降;MSN30-C/C和MSN40-C/C复合材料均在1 200～1 400℃表现出相近的抗氧化能力,但只有MSN30-C/C复合材料表现出抗1 450℃氧化的能力.     

中国核动力研究设计院研究堆燃料元件的发展现状

文章介绍中国核动力研究设计院(NPIC)紧跟国际原子能机构(IAEA)确认的防止核扩散、降低研究和试验反应堆用燃料富集度研究计划(RERTR)的进展,在研究堆低浓铀燃料元件开发研究方面进行的一系列工作,描述了NPIC的U3Si2-Al燃料元件研究及生产现状和在新开发的UMo合金燃料研究方面的最新进展.     

AS-Interface现场总线及其在低压配电与电控系统中的应用

介绍面向工控网络最底层的AS-Interface现场总线的系统构成、物理介质、电源数据传输方式及其性能和特点.AS-Interface现场总线适用于由一个控制器连接多个二进制传感器和执行器的典型要求.应用AS-Interface现场总线能组成一个在空间上独立的由网络实现两部分逻辑运作的低压配电与电控系统.     

Preserving global features of fluid animation from a single image using video examples

We synthesize animations from a single image by transferring fluid motion of a video example globally.Given a target image of a fluid scene,an alpha matte is required to extract the fluid region.Our me...     

Effects of Load Direction on Performance of Tiliting Pad Journal Bearings

At the previous works for tilting journal pad bearings （TPJBs）, most TPJBs are designed to operate with the load either directly on-pad（LOP） or directly between-pad（LBP）. However, in practice, in some cases, the load direction can change dramatically in operation. With the current requirements for the analysis of dynamic characteristics of the rotor-bearing systems, the effects of the load direction on the bearing performance must be known. So, in this paper, the effects of load direction on the static and dynamic characteristics of TPJBs are obtained with theoretical analysis based on the hydrodynamic lubrication theory, and the influence of load direction on the performance of TPJBs in different structure and operating parameters is also analysed. The results show that the load direction has considerable effects on the static and dynamic characteristics of the TPJBs, especially for the TPJBs that are operating under heavy load and high rotor speed. And for the operating condition that load direction changed rapidly, TPJBs with more pads, smaller length to diameter ratio, larger clearance ratio and smaller perload ratio can reduce the performance fluctuation with the variation of load direction.