Research on relations between failure heights of overburden strata and ~] / mining face parameters and forecasting method

The commercial FEM software ANSYS was used to analyze the failure characteristics of overburden strata under the conditions of different lengths of mining faces. It was shown that the parameters of mining faces, especially the length was the important factor to the failure heights and shapes of overburden strata. Fuzzy mathematics and statistical methods were used to analyze the forecasting method of the failure height of overburden strata influenced by the parameters of mining face based on the measured data under the conditions of fully-mechanized mining of general hardness cover rocks. On the basis of these analyses, a new forecasting formula was gotten. The forecasting result conforms to the in situ measured value. The result has a very important application value in safe and high-efficient mining, and has a very important advancing function to theoretical studies.     

The creep experiment and theoretical model analysis of gas- containing coal

A creep experiment of preformed molding coal under different confining pressures were carried out using self-developed 3-triaxial creep loading device for gas-containing coal, which loaded by Shimadzu AGI-250 kN electrical servo-controlled stiffness testing machine. Based on the experimental results, the variation trend of axial deformation under different stress states was studied, and creep failure characteristics of gas-containing coal under different confining pressures were analyzed. The experimental results were identified with seven-component nonlinear viscoelasto-plastic creep model （Hohai model）, and the creep material parameters were obtained. The experimental result complies well with the theoretical value of this model. It indicates that creep constitutive relation of gas-containing coal can be expressed by nonlinear viscoelasto-plastic creep model correctly.     

基于大数据的颌骨囊性病变诊疗系统的研究

论文设计了基于c4.5和BP的颌骨囊性病变诊疗分析系统.对颌骨囊性病变的大数据进行分析处理.系统的分析结果可用于指导颌骨囊性病变的分类、诊断、治疗、预测、评估.实验表明,系统对大数据级别的颌骨囊性病变进行决策支持和特征诊断具有可行性和有效性.系统具有高吞吐能力、高扩展性、高容错性,有较好的推广使用价值.     

极大节旋藻(Arthrospira maxima)生物钟基因kaiC的克隆及分析

以kaiC基因簇部分已知序列为引物设计位点,采用PCR反应池法从节旋藻基因组fosmid文库中筛选到kaiC基因克隆,通过步移测序获得了kaiC基因全长序列。kaiC基因编码区长1554bo,基因GC碱基含量平均为41．76％,密码子第三位明显偏向于U。在基因上游385bp范围内发现一个可能的启动子序列和一些基因调控元件。KaiC蛋白分析发现了Walker A、DXXG、不完整的Walker B等重要模体和具有催化作用的功能位点。Southem杂交的结果证明kaiC基因在极大节旋藻中为单拷贝。极大节旋藻kaiC基因的特殊结构特征为研究kai基因簇的进化提供了重要的启示。     

Cryogenic Exfoliation of 2D Stanene Nanosheets for Cancer Theranostics

Stanene(Sn)-based materials have been extensively applied in industrial production and daily life,but their potential biomedi-cal application remains largely un...     

Silicon-based inorganic-organic hybrid optoelectronic synaptic devices simulating cross-modal learning

With advances in Si-based technology infrastructures and the rapid integration of Si-based op-toelectronics,Si-based optoelectronic synaptic devices have the po...     

Ambient flash sintering of reduced graphene oxide/zirconia composites:Role of reduced graphene oxide

Fabrication of graphene/ceramic composites commonly requires a high-temperature sintering step with long times as well as a vacuum or inert atmosphere,which not only results in property degradation but also significant equipment complexity and manufacturing costs.In this work,the ambient flash sintering behavior of reduced graphene oxide/3 mol% yttria-stabilized ZrO₂(rGO/3 YSZ) composites utilizing rGO as both a composite component and a conductive additive is reported.When the sintering condition is carefully optimized,a dense and conductive composite can be achieved at room temperature and in the air within 20 s.The role of the rGO in the FS of the rGO/3 YSZ composites is elucidated,especially with the assistance of a separate investigation on the thermal runaway behavior of the rGO.The work suggests a promising fabrication route for rGO/ceramic composites where the vacuum and furnace are not needed,which is of interest in terms of simplifying the fabrication equipment for energy and cost savings.     

胺化条件对季铵化PPEK膜性能的影响

以氯甲基化杂萘联苯聚醚酮(CMPPEK)为膜材料,通过溶液法制备了CMPPEK基膜,然后将其浸泡在三甲胺水溶液中进行季铵化反应得到季铵化杂萘联苯聚醚酮(QAPPEK)阴离子交换膜。比较了CMPPEK和QAPPEK的热失重性能,CMPPEK的5%热失重温度为330℃,QAPPEK的5%热失重温度为260℃,QAPPEK的5%热失重温度与CMPPEK的相比降低了70℃。考察了三甲胺浓度、胺化时间、胺化温度等反应条件对QAPPEK膜性能的影响。结果表明:三甲胺的质量分数为33%、胺化时间为12h、胺化温度为40℃时,得到的QAPPEK膜表现出了较优异的性能,其IEC值达1.64mmol/g,在2mol/LVOSO4+3mol/LH2SO4的混合溶液中测得的面电阻为0.73Ω·cm2,应用于全钒液流电池(VRB)中,电池的能量效率高达85.9%,电流效率为98.4%,电压效率为87.3%。     

十万立方储罐的四机联照射线检测

十万立方储罐是我国新研制的一种大型储罐,由于采用新工艺安装,施工速度很快,给无损检测带来很大压力。为保证射线检测进度,通过多方调研制,作出四机联合拍照架,此架结构简单,成本低廉,有极强的实用性。多个现场实际应用表明,该方法极大地提高了检测效率,拍片质量也符合相关标准要求。