Review on Progressive Freeze Concentration Designs

Progressive freeze concentration (PFC) is a process where only a large single ice crystal is formed in the system and grown on the cooling surface so that the separation between the ice crystal and the mother solution is very easy. This makes the system very simple and leads to a lower cost. The conventional setup of PFC produces ice with high purity but lower productivity than suspension freeze concentration (SFC). The volume of ice produced is also usually low. Hence, continued areas of the development for PFC system include the quest for improved productivity and better efficiency. Different kinds of design have been investigated, which are easy to operate and cost-effective besides the ability to obtain high quality of product and better efficiency of the system. The PFC system is recognized as a good alternative if high-quality products can be produced with higher productivity. In this article, previous researches on PFC designs were reviewed for the purpose of providing an understanding on methods of designing a PFC system and also to provide references for future application of PFC.     

Synthesis,characterization of poly‐2‐ (2‐hydroxybenzylideneamino)‐6‐phenyl‐4,5,6, 7‐tetrahydrobenzo[b]thiophene‐3‐carbonitrile: Investigation of antibacterial activity and optical properties

The oxidative polycondensation reaction conditions of 2‐(2‐hydroxybenzylideneamino)‐6‐phenyl‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carbonitrile were examined. The magnitude of the reflectance of the polymer decreases sharply with increasing of wavelength up to 524 nm, then reflectance of the polymer increases slowly with increasing of wavelength. The refractive index values of the polymer vary from 1.474 to 2.350. The E_p and E_d values of the polymer were found to be 4.56 and 7.068 eV, respectively. Absorption coefficient K of the polymer is of the order 817.062–1434.77 m^?1. Angle values of incidence and refraction of the polymer vary from 57.36 to 66.95° and from 23.05 to 32.65°, respectively. The film‐phase thickness of the polymer increases with increasing photon energy. The thickness, d, of the polymer was of the order 439.3–4184.7 Å for 190 and 1100 nm, respectively. The real part of dielectric constant of the polymer decreases slowly with increasing of frequency up to about 600 THz, then the real part of dielectric constant of the polymer increases sharply with increasing of frequency. The real and imaginary parts of dielectric constant of the polymer vary from 2.17 to 5.52 and from 5.81 × 10^?5 to 3.58 × 10^?4, respectively. Finally, polymer was tested for antibacterial activities against some bacteria. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Performance evaluation of a submerged membrane bioreactor for the treatment of brackish oil and natural gas field produced water

Produced water, which is co-produced during oil and gas manufacturing, represents one of the largest sources of oily wastewaters. Therefore, treatment of this produced water may improve the economic viability and lead to a new source of water for beneficial use. In this study a submerged hollow fiber membrane bioreactor (MBR) has been studied experimentally for the treatment of brackish oil and natural gas field produced water. This type of wastewater is also characterized with relatively moderate to high amount of salt, oil and total petroleum hydrocarbons (TPH). However, the bacteria which are growing in conventional activated sludge and MBR cannot survive at these strict conditions, therefore acclimation of the bacteria is of vital importance. The performance of the biological system, membrane permeability, the rate and extent of TPH biodegradability have been investigated under different sludge age and F/M ratios. The results obtained by gas chromatography analyses showed that the MBR system could be very effective in the removal of TPH from produced water and a significant improvement in the effluent quality was achieved.     

Lipoprotein Subfraction Profile and HDL-Associated Enzymes in Sickle Cell Disease Patients

Although hypocholesterolemia is a reported finding in sickle cell disease (SCD), low-density lipoprotein (LDL)/high-density lipoprotein (HDL) subfractions and HDL-associated enzymes have not been determined in SCD patients. Blood was collected from 38 hemoglobin (Hb)A volunteers and 45 homozygous HbSS patients who had not received blood transfusions in the last 3 months. Serum lipids were measured by automated analyzer while LDL and HDL subfraction analysis was done by continuous disc polyacrylamide gel electrophoresis. Serum levels of cholesteryl ester transfer protein (CETP), lecithin-cholesterol acyltransferase (LCAT), apolipoprotein B (apoB) and apolipoprotein A-1 (apoA-I) were determined by enzyme-linked immunosorbent assay (ELISA). Total cholesterol (TC), low-density lipoprotein cholesterol (LDL-C) and high-density lipoprotein cholesterol (HDL-C) levels were significantly decreased, while TG levels were significantly increased in SCD patients compared to controls. A significant decrease in intermediate-density lipoprotein (IDL)-C, IDL-B, IDL-A and LDL-1 fractions were seen in SCD patients, while no significant difference was observed in small dense LDL particles. A significant decrease was seen in HDL-large, HDL-intermediate and HDL-small fractions in SCD patients versus controls. Levels of LCAT and ApoA-1 protein measured in SCD patients were significantly lower while no significant difference was observed in CETP and ApoB protein levels compared to controls. The reduction observed in LDL- and HDL-C in SCD patients was reflected as significantly decreased IDL, LDL-1 and HDL-subfractions. Decreased HDL subfractions may possibly lead to the reduced ApoA-1 and LCAT protein levels observed in SCD patients.     

Fabrication of oxide pellets containing lumped Gd2O3 using Y2O3‐stabilized ZrO2 for burnable absorber fuel applications

In this paper, the fabrication of novel burnable absorber fuel concepts with oxide pellets, containing either a lumped Gd₂O₃ rod, a mini‐pellet, or a spherical particle in the centerline of the oxide pellet, is investigated to propose the lumped Gd₂O₃ burnable absorber fuel concept to improve nuclear fuel performance with longer fuel cycle lengths and better fuel utilization. The unique characteristic of the lumped Gd₂O₃ burnable absorber fuel is its high spatial self‐shielding factor that reduces its burnout rate and, therefore, improves the reactivity control. Oxide pellets containing lumped Gd₂O₃ were fabricated by using a combination of cold isostatic pressing and microwave sintering at 1500°C to understand the potential technical issues in the fabrication of duplex burnable absorber fuel. The effect of the sintering temperature on the densification and phase transformation of 8 wt.% yttria‐stabilized zirconia, a surrogate for UO₂, was investigated. Spherical Gd₂O₃ particles were fabricated by the drip casting of a Gd₂O₃‐based Na alginate solution. The fabrication of duplex oxide pellets by using presintered Gd₂O₃ mini‐pellets resulted in internal cracks at the interface between the Gd₂O₃ and 8 wt.% yttria‐stabilized zirconia layers because of the mismatch of their densification. However, the formation of interfacial cracks was eliminated by controlling the initial sintered density of the lumped Gd₂O₃.     

An integrated fuzzy AHP–ELECTRE methodology for environmental impact assessment

Environmental impact assessment (EIA) is the assessment of the possible impact that a proposed plan or project may have on the environment, together consisting of the natural, social and economic aspects. The aim of this paper is to propose an environmental impact assessment methodology based on an integrated fuzzy AHP–ELECTRE approach in the context of urban industrial planning. In the proposed methodology the criteria weights are generated by a fuzzy AHP procedure. The fuzzy set theory is a perfect means for modeling uncertainty or imprecision arising from human mental phenomena. The usage of fuzzy sets in describing uncertainties and vagueness in different environmental factors simplifies the complex structure of EIA. A fuzzy outranking methodology, fuzzy ELECTRE is used to assess the environmental impact generated by the six different industrial districts which were predicted to shape the future industrial structure of Istanbul metropolitan area. Finally, a fuzzy dominance relation (FDR) methodology is used to rank the alternatives from the most risky to the least. A sensitivity analysis is also provided.     

Molecular dynamics simulation of compressible hot/cold moving lid-driven microcavity flow

Hard-sphere molecular dynamics simulations of lid-driven microcavity gas flow with various subsonic speeds and lid temperatures are conducted. Simulations with faster and colder lids show streamlines of stronger primary vortices. Variations of mass and energy centers with respect to lid speed and temperature are examined. Center of energy is less sensitive to employed lid conditions than center of gravity is. Although moving lid imparts energy into fluid, due to change of impingement rates on the walls of fixed temperature, average energy within the cavity seems quite insensitive to the subsonic lid speed. Behavior of compressibility at both top corners is observed even at low Mach numbers widely considered within incompressible flow region. While high Knudsen number causes considerable property slips near the lid, two-dimensional pressure, density, and temperature plots of excellent quality are generated. Results are promising in use of molecular dynamics simulations for compressible vortex flow analyses while providing insights for understanding microfluidics and nanofluidics in context of molecular mass, momentum and heat transfer in microscale and nanoscale systems.     

Modelling and optimization of the firing zone of a tunnel kiln to predict the optimal feed locations and mass fluxes of the fuel and secondary air

Optimization of the firing zone was done to minimize the fuel cost as being the objective function by finding the optimal operating variables. These variables are the initial admixed coal (AC) in the brick body, the mass flux and locations of pulverized coal (PC) and the secondary air required for complete combustion. The constraints are the carbon coming from the AC which increases the porosity of the bricks, and should be consumed completely. Two other constraints to avoid thermal shock are the temperature difference between bricks and air, and the maximum heating rate of the bricks. The results were compared to the plant data.     

Microstructure and phase composition of cordierite-based co-clinker

The aim of this work is to study the effect of phase composition and microstructure of cordierite-based co-clinkers on the electrical properties and coefficient of thermal expansion of cordierite briquettes. To achieve this aim talc and kaolinite samples were collected from quarries in the Egyptian desert. The samples are characterized using XRD, XRF, polarized light, cathodoluminescence and SEM microscopy attached with EDAX, in addition to X-ray micro-computed tomography (3D- µXCT). The electrical properties and coefficient of thermal expansion of the cordierite briquettes are determined using HiTESTER instrument and automatic Netzsch DIL402 PC dilatometer, respectively.Five talc-based batches were shaped and fired in the temperature range 1000–1350 °C for 2 h. The microstructural and physical characteristics of the resulted cordierite-based co-clinkers depend mainly on the viscosity of the liquid phase developed during firing. The microchemistry of the cordierite briquettes confirms their enrichment of both cordierite and ferroan-cordierite crystallized directly from locally developed melts. The dielectric constant and loss factor values for cordierite briquettes allow their possible use as insulator components in electronic applications.