Effects of growth rate and temperature gradient on the microstructure parameters in the directionally solidified succinonitrile–7.5 wt.% carbon tetrabromide alloy

Succinonitrile (SCN)–7.5 wt.% carbon tetrabromide (CTB) alloy was unidirectionally solidified with a constant growth rate (V = 33 μm/s) at five different temperature gradients (G = 4.1–7.6 K/mm) and with a constant temperature gradient (G = 7.6 K/mm) at five different growth rates (V = 7.2–116.7 μm/s). The primary dendrite arm spacings, secondary dendrite arm spacings, dendrite tip radius and mushy zone depths were measured. Theoretical models for the microstructure parameters have been compared with the experimental observations, and a comparison of our results with the current theoretical models and previous experimental results have also been made.     

Determination of biogenic amines in sucuk

The biogenic amines content of sucuk (Turkish dry fermented sausage) were determined on 30 samples obtained from retail markets and butchers in Turkey. Also, pH and a_w values, microbiological properties, and NPN levels of these samples were analyzed. The most important biogenic amines were tyramine (range 2.4–676 mg/kg), followed by putrescine varied from not detected to 364 mg/kg. Histamine content was under 50 mg/kg in 80% of the samples while it was over 100 mg/kg in only one sample. Tryptamine was detected in 16 of 30 samples in the range of 1.2–82.3 mg/kg.

Lactic acid bacteria, Micrococcus/Staphylococcus and Enterobacteriaceae counts of samples varied from 2.84 to 8.85 log cfu/g, <2.00 to 6.74 log cfu/g, and <2.00 to 5.04 log cfu/g, respectively. pH values were varied between 4.53 and 6.29 while water activity (a_w) were measured to be between 0.761 and 0.960. NPN values were determined to be between 1.47% and 4.10%. Generally, total amine content was high in samples that had high NPN levels.     

Experimental and numerical investigation of heat and mass transfer during drying of Hayward kiwi fruits (Actinidia Deliciosa Planch)

In this paper we undertake an experimental and numerical study on heat and mass transfer analysis during drying of kiwi fruits. In the experimental part, the effects of various drying conditions in terms of air velocity, temperature and relative humidity on drying characteristics of kiwi fruits are investigated. In the numerical part, the external flow and temperature fields are studied using a commercial CFD package. From these fields, the local distributions of the surface convective heat transfer coefficients for the fruits are determined to predict the local convective mass transfer coefficients through the analogy between the thermal and concentration boundary layers (known as the Chilton–Colburn analogy). In addition, the time-dependent temperature and moisture distributions for different cases are obtained using the code developed to investigate heat and mass transfer aspects inside the fruits. Numerical results are then compared with experimental data and a considerably high agreement is obtained.     

Synthesis,characterization, and thermal degradation kinetics of the copolymer poly(4‐methoxybenzyl methacrylate‐co‐isobornyl methacrylate)

A copolymer of 4‐methoxybenzyl methacrylate and isobornyl methacrylate was synthesized by atom transfer radical polymerization. The structure of poly(4‐methoxybenzyl methacrylate‐co‐isobornyl methacrylate) was confirmed by means of Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR techniques. The molecular weight distribution values of the copolymer were determined with gel permeation chromatography. The number‐average molecular weight and polydispersity index values of poly(4‐methoxybenzyl methacrylate‐co‐isobornyl methacrylate) were found to be 12,500 and 1.5, respectively. The kinetics of the thermal degradation of the copolymer was investigated with thermogravimetric analysis at different heating rates. The activation energy values obtained with the Kissinger, Flynn–Wall–Ozawa, and Tang methods were determined to be 166.38, 167.54, and 167.47 kJ/mol, respectively. Different integral and differential methods were used, and the results were compared with these values. Doyle approximation was also used for comparing the experimental results to master plots. An analysis of the experimental results suggested that the reaction mechanism was an R₁ deceleration type in the conversion range studied. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Study of photochemical and sonochemical processes efficiency for degradation of dyes in aqueous solution

The degradation of two commercially available dyestuffs (C.I. Reactive Black 5 and C.I. Disperse Orange 25) by ultraviolet radiation (UV), ultrasonic irradiation (US), UV/H₂O₂ and US/H₂O₂ processes was investigated in a laboratory-scale batch photoreactor equipped with a 55 W immersed-type low-pressure mercury vapor lamp and a sonoreactor with low frequency (42 kHz) plate type transducer at 170 W of acoustic power. The toxicity was also evaluated in acute toxicity studies using Daphnia magna. Results showed that color removal efficiencies by US and US/H₂O₂ processes were negligible for both dyes. Almost complete disappearance of Reactive Black 5 (97.9%) in UV/H₂O₂ process was possible after 5 min of irradiation. The maximum color removal efficiency of Disperse Orange 25 after 10 min of irradiation, however, was only 9.2% and reached a maximum value of 41% after 120 min of irradiation. Pseudo-first order kinetics with respect to dyestuffs concentrations was found to fit all the experimental data. The results clearly showed that both dyes examined were toxic to D. magna and resulted in quite low LC₅₀ values.     

3-D micro-ceramic components from hydrothermally processed carbon nanotube–boehmite powders by electrophoretic deposition

Boehmite/multi-wall carbon nanotube (MWCNT) composite powders were prepared by hydrothermal processing. Starting chemical of aluminum acetate powders (2Al(OH)(C₂H₃O₂)₂) and MWCNTs were mixed for the formation of stoichiometric boehmite powders in an attempt to synthesize MWCNT-reinforced boehmite nano-powders via hydrothermal synthesis at 200 °C for 2 h. Kinetically stable suspensions of MWCNT–boehmite composite powders were prepared and subsequently electrophoretic deposition (EPD) was applied to obtain complex shape products in the form of micro-gears. It is shown that the EPD technique is a powerful tool to manufacture small components in a short time. Detail TEM observations also indicated that hydrothermal processing provides an ideal environment to obtain homogeneous mixtures of MWCNT–boehmite powders due to effective surface functionalization of MWCNTs under hydrothermal conditions.     

Taxonomic investigation of selected rust fungi using scanning electron microscopy from Khyber Pakhtunkhwa,Pakistan

Rusts comprises the largest natural group of plant pathogens including approximately 8% of all described Fungi. Rust fungi are extremely plant pathogens responsible for great losses to agriculture productivity. Rust species belong to several genera among which more than half are Puccinia species. In Pakistan, rust causes severe damage to agriculture crops. Current study was carried out to identify and characterize different rust species common in the research area through microscopy and Scanning electron microscopy (SEM) in Khyber Pakhtunkhwa, Pakistan. Morpho-anatomical investigation of each collected rust species was carried out using different standard protocols. The dimensions of spores were measured and snapped under a stereomicroscope. SEM was used to examine the shape, size, and ornamentation of the spores of each rust fungus. Results revealed documentation of seven rust fungi, that is, Melampsora euphorbiae, Phragmidium barclayi, Puccinia nepalensis, P. exhausta, P. menthae, Uromyces capitatus, and Uromyces decorates belong to four different genera, were recorded. SEM revealed that spermogonia and Aecia were missing in most of the rust fungus studied. Uredinia was found in a scattered, irregular, lengthy, and epidermis-enclosed form. Urediniospores were found to be ovulating, elongated, echinulate, globose to sub-globose, ellipsoid to ovoid, and globose to sub-globose. Telia was found as sub-epidermal, amphigenous, dispersed, minute, and spherical cells. Teliospores ranged in form from cylindrical to oblong. The germ pores were detected in both apical (top cell) and basal (bottom cell) idiosyncratic and pedicel-attached cells. The techniques used in the current investigation will aid mycologists in rust identification and microscopic characterization.     

Synthesis and characterization of polyphenols derived from 4-fluorobenzaldeyde: The effect of electron-donating group on some physical properties

In this study, we proposed to investigate how the effect of electron-donating methyl ( CH₃) group at p-position of amin ( NH₂) group in aminophenol (AP) compound affected thermal stability, optical, electrochemical properties, and conductivity measurement. For this reason, we choice 2-AP and 2-amino-4-methylphenol compounds and synthesized phenolic monomers by condensation reactions 4-fluorobenzaldehyde with aromatic amino phenols. Then, these monomers were converted to their polyphenol derivatives by oxidative polycondensation reactions in an aqueous alkaline medium. Structural characterizations were carried out by FTIR, NMR, and size exclusion chromatography. Cyclic voltammetry was used to determine the electrochemical oxidation-reduction characteristics. Optical properties were investigated by UV–vis and fluorescence analyses. Solid state electrical conductivities were measured on polymer films by four-point probe technique using an electrometer. Thermal data of monomer/polymer and polymers were obtained by TG-DTA and DSC techniques, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012