Effect of hyperbranched poly(citric polyethylene glycol) with various polyethylene glycol chain lengths on starch plasticization and retrogradation

A series of hyperbranched poly(citric polyethylene glycol) (PCPEG) materials with varied polyethylene glycol (PEG) chain lengths as plasticizers were mixed with maize starch (MS) via cooking and film‐forming. The structure, pasting property, plasticization, aging property, moisture absorption and compatibility of plasticized starches were studied by means of Fourier transform infrared spectroscopy, X‐ray diffraction, rapid viscosity analysis, tension testing, moisture absorption measurements and scanning electron microscopy. Compared with PEG and citric acid, PCPEG was more effective in promoting starch chain movement and inhibiting the retrogradation of starch film. Also, PCPEG/MS had smaller moisture content. The longer the plasticizer chain, the better were the aging resistance and moisture resistance of starch. But with an increase of PEG chain length, mechanical properties of PCPEG/MS deteriorated and the compatibility between PCPEG and MS decreased. The hyperbranched derivative of PEG with longer chain exhibited improved plasticization and compatibility with starch. © 2019 Society of Chemical Industry     

Preparation and properties of fluorinated silicon two‐component polyurethane hydrophobic coatings

A polyurethane (PU) hydrophobic coating was prepared by the two‐component method, polycarbonate diol and isophorone diisocyanate becoming a two‐phase composition. The PU films with hydrophobic surface were prepared by establishing a rough structure on the surface of silica (SiO₂) modified with silane coupling agents (γ‐(2,3‐epoxypropoxy)propytrimethoxysilane (KH560) and (heptadecafluoro‐1,1,2,2‐tetradecyl)trimethoxysilane (FAS)). First, the surface of SiO₂ was covered by a layer of hydrophobic methyl and fluorocarbon (C–F) groups. Then, the SiO₂ and modified SiO₂ were obtained by the introduction of KH560 and FAS with the silanol reaction by ultrasonic stirring. The effect of SiO₂ and modified SiO₂ on the structure and hydrophobic properties of PU was investigated by a series of test instruments. The results showed that the introduction of SiO₂ and modified SiO₂ was beneficial for increasing the roughness of the PU coating surface; the roughness of FAS/SiO₂‐PU could reach up to 14.790 nm, four times better than pure PU. A hydrophobic modified PU coating with water contact angle 123° was fabricated by using the hydrophobic C–F group FAS as a low surface energy material and establishing a micro rough structure on the surface of PU. Moreover, PU modified with KH560 and FAS can reduce the glass transition temperature (T_g) of soft segments, resulting in improvement of micro‐phase separation. © 2020 Society of Chemical Industry     

Interaction of two in-line bubbles of equal size rising in viscous liquid

The interaction of bubbles is the key to understand gas–liquid bubbling flow. Two-dimensional axis-symmetry computational fluid dynamics simulations on the interactive bubbles were performed with VOF method,which was validated by experimental work. It is testified that several different bubble interactive behaviors could be acquired under different conditions. Firstly, for large bubbles(d: 4, 6, 8, 10 mm), the trailing bubble rising velocity and aspect ratio have negative correlations with liquid viscosity and surface tension. The influences of viscosity and surface tension on leading bubble are negligible. Secondly, for smaller bubbles(d: 1, 2 mm), the results are complicated. The two bubbles tend to move together due to the attractive force by the wake and the potential repulsive force. Especially for high viscous or high surface tension liquid, the bubble pairs undergo several times acceleration and deceleration. In addition, bubble deformation plays an important role during bubble interaction which cannot be neglected.     

软模板法制备多级孔ZSM-5分子筛的研究进展

相比传统ZSM-5分子筛,多级孔ZSM-5分子筛具有空间位阻小、传质效率高、焦炭少等特点,近年来在分子筛领域应用广泛。多级孔分子筛通常可用后处理法和模板剂法制备,相比后处理法,模板剂法能更好地控制介孔的结构和孔道尺寸。概述了采用传统表面活性剂、两亲性的有机硅烷、双功能多季铵盐表面活性剂及高分子聚合物等软模板法合成多级孔ZSM-5分子筛的研究进展。分析不同软模板剂的特点和作用机理,阐述了合成后分子筛的结构特点及催化性能等。指出在今后的研究中,可以设计价格较低的新型功能化模板剂,优化合成过程,致力于在理解合成机理的前提下,寻找操作简单、绿色环保的合成路线,并将其推行到实际工业生产中。     

异丙醇铝控制水解制备高纯拟薄水铝石和多孔氧化铝

主要进行异丙醇铝水解制备高纯拟薄水铝石和高纯多孔γ-Al_2O_3的研究。合成路线以异丙醇铝为原料,改变反应过程中水化液组成、水化温度和水化时间,制备一系列拟薄水铝石及其焙烧产物多孔γ-Al_2O_3。结果表明,水化液中异丙醇的存在会抑制无定型氢氧化铝的晶化,但也有助于形成大孔径、高比表面和大孔容的氧化铝;纯水体系下,60℃以下水化会出现三水铝石,60℃以上水化的产物则为拟薄水铝石;γ-Al_2O_3孔结构与前驱体拟薄水铝石的结晶度有关,晶粒越大的拟薄水铝石,焙烧所得氧化铝的孔径和孔容也增大。因此,水化条件的改变可以实现拟薄水铝石结构的控制,进而获得不同结构的多孔氧化铝。为由异丙醇铝水解制备高纯拟薄水铝石和多孔氧化铝的工业化提供相应的研究基础。     

剂油比对煤焦油沥青质加氢过程的影响

以中低温煤焦油沥青质为原料,采用NiMoW/γ-Al_2O_3商业催化剂,在反应温度380℃、反应压力8 MPa和反应时间1.5 h条件下,分别在不同剂油质量比(1∶25、1∶20、1∶15、1∶10)条件下进行加氢实验,通过采用元素分析、FT-IR、XRD、~1H-NMR和XPS等分析表征手段,考察不同剂油质量比对中低温煤焦油沥青质加氢转化过程的影响。结果表明,随着剂油质量比的增加,沥青质转化率提高,加氢产物分布也发生大幅变化,沥青质和芳香分轻质化转化为饱和分。但随着剂油质量比的进一步提高,同时也发生了更多的裂化反应和缩合反应,剂油质量比在合适范围能够很好地起到加氢轻质化且抑制结焦的效果。     

基于红外测温的文物冷冻干燥监测技术

为了给大型、大批量文物的冷冻干燥保驾护航,以饱水木质文物为样品,结合红外温度传感器和红外热像仪,对文物的冷冻过程进行温度监控。结果表明,红外温度传感器对样品表面温度变化十分灵敏,能有效跟踪温度的动态变化过程,但测量准确性会受样品发射率、环境波动等因素的影响。红外热像仪经发射率标定后可达到较高的测量精度,利用热成像得到的图像,可直观地筛查样品表面的最高/最低温度区。经过分析,样品在靠近仓内换热器端的位置,表面温度较低,靠近仓门的位置,表面温度较高,且样品上表面温度略低于侧面温度。根据红外测温结果,预期能给出冷冻干燥设备控制的建议,降低文物冻干失败的风险,减轻文保工作者的工作负担。     

A comparative study on hygroscopic and physiochemical properties of chicken powders obtained by different drying methods

Abstract

Different drying methods (spray drying (SD), vacuum drying (VD), microwave vacuum drying (MVD), and infrared vacuum drying (IFVD)) were applied in order to compare the hygroscopicity behavior of chicken powders. The hygroscopicity curves and glass transition temperature were used to evaluate the influence of ambient humidity and temperature on moisture absorption of powders. The results showed that the chicken powder dried by MVD had the lowest moisture absorption, followed by IFVD, VD, and SD. The hygroscopicity of SD chicken powders was different from other three kinds of chicken powders due to the physical properties of particles and the changes of protein secondary structure as detected by the Fourier transform-infrared spectrometer. For the three vacuum drying methods, the difference of protein secondary structure was the main reason of differences in hygroscopicity. Although MVD chicken powders were slightly inferior to SD chicken powders in taste, MVD chicken powders were the best in terms of smell and color as suggested by instrumental sensory parameter evaluations. It was found that MVD had a positive effect on reducing moisture absorption and maintaining sensory quality of chicken powders.     

自动电位滴定在大分子量聚酯多元醇羟值测定中的应用

在目前通用的乙酸酐-吡啶法测羟值的基础上,针对低羟值聚酯多元醇建立了准确度更高的分析方法,并采用自动电位滴定法测定聚酯多元醇的羟值。测试结果表明,该法提高了测试的准确度,并可解决深色和浑浊样品无法手动滴定的问题。     

Transition-Metal-Catalyzed 1,2-Carboboration of Alkenes: Strategies,Mechanisms, and Stereocontrol

During the past decade, many research groups have described catalytic methods for 1,2-carboboration, allowing access to structurally complex organoboronates from alkenes. Various transition metals, especially copper, palladium, and nickel, have been widely used in these reactions. This review summarizes advances in this field, with a special focus on the catalytic cycles involved in different metal-catalyzed carboboration reactions, as well as the regio- and stereochemical consequences of the underlying mechanisms. 1,2-Carboboration of other unsaturated systems, such as alkynes and allenes, is outside of the scope of this review.