联苯型双醚二酐的合成及其表征

以4,4′二羟基联苯(联苯二酚)和N甲基4硝基邻苯二甲酰亚胺为主要原料,在非质子性溶剂中,经缩合得到联苯双醚二酞酰亚胺,再经水解、酸化、脱水等工艺制得联苯型双醚二酐(BPEDA)。通过红外光谱对产品进行了表征,结果符合要求。该单体与4,4′二氨基二苯醚(ODA)在N,N二甲基乙酰胺(DMAc)中缩聚所得聚酰胺酸特性粘度为0.72dL/g。将PI制成薄膜,室温下拉伸强度为98.5MPa,成膜性能良好。     

Effect of Pretreatment Atmosphere on CuO/TiO2 Activities in NO + CO Reaction

Using TiO₂ as carrier, CuO/TiO₂ catalysts with different CuO loading were prepared by the impregnation method. The catalytic activities in NO+CO reaction were examined with a micro-reactor gas chromatography reaction system and the methods of TPR, XPS and NO-TPD. It was found that the catalytic activities were affected by pretreatment atmosphere, i.e. H₂ atmosphere > reduction–reoxidation > 10%CO/He > reaction gas (fresh sample). NO decomposition was better by low-valence Cu species than by high-valence Cu species, i.e. Cu⁰>Cu⁺>Cu²⁺. The XPS results indicated that Cu species on CuO/TiO₂ were Cu⁰, Cu⁺, normal Cu²⁺(Cu²⁺(I)) and chain-structured Cu²⁺(Cu²⁺(II)) as –Cu–O–Ti–O–. The activities of Cu²⁺(II) were much higher than that of Cu²⁺(I), but both species were very unstable in the reaction atmosphere and easily reduced by CO, which accounted for the variable activities of fresh catalysts with increasing reaction temperature. In NO+CO reaction, the redox process was a cycle of Cu⁺–Cu²⁺(I) at low reaction temperature but was a cycle of Cu⁰–Cu⁺ at high reaction temperature. As shown by NO-TPD, high catalytic activities could be attributed to the following factors, e.g. oxygen caves on the catalyst’s surface after pretreatment with H₂ and reduction–reoxidation, formation of Cu⁰ after pretreatment with H₂, and increment of Cu species dispersion and formation of Cu²⁺(II) after pretreatment with reduction–reoxidation.     

基于仿真卡的通用1553B总线测试软件设计

1553B总线通信是航天器终端设备的重要功能,在研制各阶段,对设备的总线通信功能进行测试是必不可少的。基于总线仿真卡进行二次开发,提出一种通用1553B总线测试软件设计方法,采用总线消息描述文件和设备参数描述文件分别描述总线消息和设备参数,设计通用程序模块,使软件代码不依赖总线消息或设备参数的具体定义。所述方法已在某航天器多个分系统测试中得以应用。     

细胞固定化催化生产精细化学品的研究进展Q

摘要：细胞固定化技术具有流程简单、生物相容、操作稳定等优点，可有效保证细胞活性，实现高效的细胞催化生产精细化学品。本文介绍了表面附着、凝胶包埋、聚电解质层层自组装膜等多细胞固定化方法，及其在二元醇、生物乙醇、乳酸、酯、多糖等精细化学品生产中的研究现状和进展，并分析讨论了各种方法存在的问题。同时，总结了近年来新发展的单细胞纳米涂层固定化方法的机理、趋势及应用于精细化学品生产的可能性。最后对细胞固定化催化生产精细化学品面临的技术挑战及研究方向做出展望，以期为精细化学品生产提供一定的技术支持。     

垂直筛板塔流体力学与传质研究状况

对我国在新型垂直筛板塔的流体力学性能 ,诸如塔板干板压降与湿板压降、板孔漏液、塔板过量雾沫夹带、板上帽罩单元的液体提升能力与液体循环程度的研究及其传质性能 ,诸如塔板传质效率模型、塔板空间气相中液体大小与分布、板间空间立体传质作用的研究等进行了综合 ,并予以分析论述 ,从中看出我国对新型垂直筛板塔已进行了较全面深入的研究工作 ,并取得了新进展。     

等离子硅刻蚀及其工艺参数的多尺度优化

用CFD-ACE+和CFD-TOPO分别对容性耦合等离子体反应腔室放电和等离子硅刻蚀过程进行仿真,讨论不同射频电压和腔室条件对等离子体特性的影响.结果表明:随着射频电压的升高,离子的通量增大;在低射频电压时,离子通量随腔室压强的升高而减小,而在高射频电压时趋势则相反.用Kriging模型对影响刻蚀形貌的参数(腔室压强和射频电压)进行优化,结果表明该优化方法可以为工艺条件相近的刻蚀机设备的设计提供参考.     

模数对无机富锌涂料和涂层性能的影响

硅酸钾富锌涂料是目前广泛使用的钢铁防腐蚀涂料。作为涂料粘结剂的高模数硅酸钾溶液对涂料和涂层的性能有重要影响。本研究考察了硅酸钾粘结剂的模数变化对涂料及涂层性能产生的影响。实验结果表明：粘结剂模数的提高可以提高固化后涂层的耐水性能，当粘结剂模数在5.0左右时，所得富锌涂层具有最佳的耐磨性能，但当粘结剂模数超过5.5时会造成涂料施工性能和贮存稳定性下降，涂层柔韧性降低，从而降低涂层的耐磨性能。     

Synthesis and characterization of a new water-soluble endohedral metallofullerene for MRI contrast agents

Water-soluble amino acid derivatives of gadolinium (Gd) endohedral metallofullerenes (AAD-EMFs), Gd@C₈₂O_m(OH)_n(NHCH₂CH₂COOH)_l (m ≈ 6, n ≈ 16 and l ≈ 8) are synthesized by a direct reaction of the pure endohedral metallofullerene Gd@C₈₂ with an excess of alkaline solution of β-alanine. The structure of the AAD-EMFs is characterized by FTIR, XPS and laser-desorption time-of-flight (LD-TOF) mass spectrometries. Water proton relaxivity analysis indicates that the longitudinal relaxivity R₁ (the effect on 1/T₁, 9.1 mM⁻¹ s⁻¹) of AAD-EMFs is higher than that of the commercial MRI contrast agent, Magnevist (gadolinium-diethylenetriaminepentaacetic acid, Gd-DTPA, 5.6 mM⁻¹ s⁻¹). The MRI phantom studies are performed to confirm the high efficiency of this sample as MRI contrast agents.     

Morphologic study of electrochemically formed lead dioxide

Various electrochemical methods with different conditions were used to prepare lead dioxide (PbO₂). The observation revealed that the morphology of deposited PbO₂ could be controlled by simply changing deposition parameters. Under the condition of oxygen evolution, which dominates the electrode process, uniformly distributed high porous structured PbO₂ was formed. The results indicated that large current density or high potential polarization should be one of the most important and necessary factors for forming high surface area PbO₂ deposit. Only β-PbO₂ was identified by X-ray diffraction measurement for the deposit prepared by present methods and solution. One potential application of this method is to prepare nanoscaled PbO₂ parallel lines.     

油田废水电解杀菌研究

采用电解杀菌技术处理油田废水，研究了电解时间、电流强度、极板间距以及电极联结方式等因素对废水中硫酸盐还原菌杀灭效果的影响。结果表明，油田废水经3min电解杀菌，硫酸盐还原菌杀灭率高达99．90％。随着电解时间的增加，硫酸盐还原菌的杀菌率进一步提高；电流强度增加，硫酸盐还原菌的杀灭率升高。在电流强度保持不变的情况下，随着极板间距增加，极板之间电压升高，更有利于杀灭硫酸盐还原菌。在极板间电流强度相同的条件下，两种电极联结方式的杀菌率差别不大，杀菌率均在99．9％以上。