Electrorheological properties of kaolinite,polyindole, and polyindole/kaolinite composite suspensions

In this study, polyindole (PIN) and polyindole/kaolinite (PIN/KAO) composite were synthesized by free radical polymerization using FeCl₃ as an initiator. Average particle sizes (d₅₀) of PIN and PIN/KAO composite were determined by dynamic light scattering (DLS) as 7.2 and 6.2 μm, respectively. The samples were characterized by FTIR, elemental analysis, DSC/TGA and SEM measurements. Suspensions of KAO, PIN, and PIN/KAO composite were prepared in silicone oil (SO) and the sedimentation stabilities were determined. Electrorheological (ER) properties of these suspensions were studied as a function of dispersed phase concentration, shear rate, shear stress, and temperature; and yield stresses and excess shear stresses determined. Further, dielectric properties of KAO, PIN, and PIN/KAO composite were investigated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Competitive adsorption of uranyl ions in the presence of Pb(II) and Cd(II) ions by poly(glycidyl methacrylate) microbeads carrying amidoxime groups and polarographic determination

The adsorption capacity of UO in the presence of Pb(II) and Cd(II) ions was investigated with amidoximated poly(glycidyl methacrylate) (PGMA) microbeads with an average size of 135 μm packed in a glass column (0.5‐cm i.d. and 20‐cm length, flow rate = 3 mL/min) under competitive conditions. A differential pulse polarography technique was used for the determination of trace quantities of uptaken elements by the measurement of the reduction peak currents at ?200/?950, ?400, and ?600 mV (vs a saturated calomel electrode) for UO, Pb(II), and Cd(II) ions, respectively. When only UO was found in the eluate, its adsorption was 85.3% from a 50 μM initial solution. However, when there was UO with binary systems of Pb(II) or Cd(II), it was 78.2 and 76.3%, respectively. On the other hand, in a ternary mixture of UO with Pb(II) and Cd(II), the adsorption was found to be 75.2% with the same initial concentration. According to the results, the competitive adsorption studies showed that these amidoximated PGMA microbeads had good adsorption selectivity for UO with the coexistence of Pb(II) and Cd(II) ions. The ionic strength of the solution also influenced the UO adsorption capacity of the amidoximated PGMA microbeads. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 4168–4172, 2007     

Preparation and characterization of novel poly(glycidyl methacrylate) beads carrying amidoxime groups

Poly(glycidyl methacrylate) (PGMA) beads with an average size of 350 μm were synthesized by suspension polymerization technique. The PGMA beads were first modified with iminodiacetonitrile (IDAN). Then, the IDAN‐modified beads were subsequently modified by hydroxylamine. The IDAN modification and the conversion of the nitrile groups to amidoxime were followed by FT‐IR spectroscopy. The surface morphology and thermal behavior of the PGMA and its modified forms were also characterized by scanning electron microscopy and thermogravimetric analysis techniques, further confirming modification and amidoximation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Some geotechnical properties of soils in the Haditha area,W. Iraq

The present study is part of the regional engineering geological survey of the western deserts dealing with soil investigations attempting their classification and evaluation for engineering purposes. Field study has revealed that these soils are mainly of residual origin, partly they are colluvial and alluvial. Laboratory test results show that they composed of both coarse and fine fractions. The coarse-grained are mainly of SM-group, less frequently of SC-group. Fine-grained soils are of both CL-and ML groups in equal significance. These soils are seldom free from soluble salts, particularly sulphates in the form of secondary gypsum, some with a high content. Results are discussed in details. Important engineering properties with suitability for engineering use are also given.     

Exploration of Advanced Electrode Materials for Approaching High‐Performance Nickel‐Based Superbatteries

The surging interest in high performance, low‐cost, and safe energy storage devices has spurred tremendous research efforts in the development of advanced electrode active materials. Herein, the in situ growth of zinc–iron layered double hydroxide (Zn–Fe LDH) on graphene aerogel (GA) substrates through a facile, one‐pot hydrothermal method is reported. The strong interaction and efficient electronic coupling between LDH and graphene substantially improve interfacial charge transport properties of the resulting nanocomposite and provide more available redox active sites for faradaic reactions. An LDH–GA||Ni(OH)₂ device is also fabricated that results in greatly enhanced specific capacity (187 mAh g^?1 at 0.1 A g^?1), outstanding specific energy (147 Wh kg^?1), excellent specific power (16.7 kW kg^?1), along with 88% capacity retention after >10 000 cycles. This approach is further extended to Ni–MH and Ni–Cd batteries to demonstrate the feasibility of compositing with graphene for boosting the energy storage performance of other well‐known Ni‐based batteries. In contrast to conventional Ni‐based batteries, the nearly flat voltage plateau followed by a sloping potential profile of the integrated supercapacitor–battery enables it to be discharged down to 0 V without being damaged. These findings provide new prospects for the design of high‐performance and affordable superbatteries based on earth‐abundant elements.     

A Highly Secured Image Encryption Scheme using Quantum Walk and Chaos

The use of multimedia data sharing has drastically increased in the past few decades due to the revolutionary improvements in communication technologies such as the 4th generation (4G) and 5th generation (5G) etc. Researchers have proposed many image encryption algorithms based on the classical random walk and chaos theory for sharing an image in a secure way. Instead of the classical random walk, this paper proposes the quantum walk to achieve high image security. Classical random walk exhibits randomness due to the stochastic transitions between states, on the other hand, the quantum walk is more random and achieve randomness due to the superposition, and the interference of the wave functions. The proposed image encryption scheme is evaluated using extensive security metrics such as correlation coefficient, entropy, histogram, time complexity, number of pixels change rate and unified average intensity etc. All experimental results validate the proposed scheme, and it is concluded that the proposed scheme is highly secured, lightweight and computationally efficient. In the proposed scheme, the values of the correlation coefficient, entropy, mean square error (MSE), number of pixels change rate (NPCR), unified average change intensity (UACI) and contrast are 0.0069, 7.9970, 40.39, 99.60%, 33.47 and 10.4542 respectively.     

Modeling of the Magnetization and Magnetocaloric Effect in Ni2MnGa Heusler Alloy with the Effective Field Theory

Journal of Low Temperature Physics - This study modeled and investigated the magnetocaloric effect in Ni2MnGa Heusler alloy characterized by its magnetic entropy change (ΔSm) and its...     

Preparation of Au nanoparticles by Q switched laser ablation and their application in 4-nitrophenol reduction

Clean Technologies and Environmental Policy - This work reports the fabrication of Au nanoparticles (NPs) by laser ablation of a gold metal plate immersed in water in the absence of stabilizing...     

RAFT-mediated synthesis of cationic poly[(ar-vinylbenzyl)trimethylammonium chloride] brushes for quantitative DNA immobilization

The synthesis of cationic poly[(ar-vinylbenzyl)trimethylammonium chloride)] [poly(VBTAC)] brushes was achieved via reversible addition-fragmentation chain transfer (RAFT) polymerization and used for quantitative DNA immobilization. Initially, silicon surfaces were modified with RAFT chain transfer agent by utilizing an amide reaction involving a silicon wafer modified with allylamine and 4-cyanopentanoic acid dithiobenzoate (CPAD). Poly(VBTAC) brushes were then prepared via RAFT-mediated polymerization from the surface immobilized CPAD. Various characterization techniques including ellipsometry, X-ray photoelectron spectroscopy, grazing angle-Fourier transform infrared spectroscopy, atomic force microscopy and contact-angle goniometer were used to characterize the immobilization of CPAD on the silicon wafer and the subsequent polymer formation. The addition of free CPAD was required for the formation of well-defined polymer brushes, which subsequently resulted in the presence of free polymer chains in solution. The free polymer chains were isolated and used to estimate the molecular weights and polydispersity index of chains attached to the surface. Moreover, from atomic force microscopy and ellipsometry measurements, it was also determined that the density of immobilized DNA on the cationic poly(VBTAC) brushes can be quantitatively controlled by adjusting the solution concentration.