Structural and electrical characteristics of high-κ Er2O3 and Er2TiO5 gate dielectrics for a-IGZO thin-film transistors

In this letter, we investigated the structural and electrical characteristics of high-κ Er₂O₃ and Er₂TiO₅ gate dielectrics on the amorphous indium-gallium-zinc-oxide (a-IGZO) thin-film transistor (TFT) devices. Compared with the Er₂O₃ dielectric, the a-IGZO TFT device incorporating an Er₂TiO₅ gate dielectric exhibited a low threshold voltage of 0.39 V, a high field-effect mobility of 8.8 cm²/Vs, a small subthreshold swing of 143 mV/decade, and a high I_on/I_off current ratio of 4.23 × 10⁷, presumably because of the reduction in the oxygen vacancies and the formation of the smooth surface roughness as a result of the incorporation of Ti into the Er₂TiO₅ film. Furthermore, the reliability of voltage stress can be improved using an Er₂TiO₅ gate dielectric.     

Peptide and protein mimetics inhibiting amyloid beta-peptide aggregation

Protein misfolding is related to some fatal diseases including Alzheimer's disease (AD). Amyloid beta-peptide (Abeta) generated from amyloid precursor protein can aggregate into amyloid fibrils, which are known to be a major component of Abeta deposits (senile plaques). The fibril formation of Abeta is typical of a nucleation-dependent process through self-recognition. Moreover, during fibrillization, several metastable intermediates such as soluble oligomers, including Abeta-derived diffusible ligands (ADDLs) and Abeta*56, are produced, which are thought to be the most toxic species to neuronal cells. Therefore, construction of molecules that decrease the Abeta aggregates, including soluble oligomers, protofibrils, and amyloid fibrils, might further our understanding of the mechanism(s) behind fibril formation and enable targeted drug discovery against AD. To this aim, various peptides and peptide derivatives have been constructed using the "Abeta binding element" based on the structural models of Abeta amyloid fibrils and the mechanisms of self-assembly. The central hydrophobic amino acid sequence, LVFF, of Abeta is a key sequence to self-assemble into amyloid fibrils. By combination of this core sequence with a hydrophobic or hydrophilic moiety, such as cholic acid or aminoethoxy ethoxy acetic acid units, respectively, good inhibitors of Abeta aggregation can be designed and synthesized. A peptide, LF, consisting of the sequence Ac-KQKLLLFLEE-NH 2, was designed based on the core sequence of Abeta but with a simplified amino acid sequence. The LF peptide can form amyloid-like fibrils that efficiently coassemble with mature Abeta1-42 fibrils. The LF peptide was also observed to immediately transform the soluble oligomers of Abeta1-42, which are thought to pose toxicity in AD, into amyloid-like fibrils. On the other hand, two Abeta-like beta-strands with a parallel orientation were embedded in green fluorescent protein (GFP), comprised of a beta-barrel structure, to make pseudo-Abeta beta-sheets on its surface. The GFP variant P13H binds to Abeta1-42 and inhibits Abeta1-42 oligomerization effectively in a substoichiometric condition. Thus, molecules capable of binding to Abeta can be designed based on structural similarities with the Abeta molecule. The peptide and protein mimetics based on the structural features of Abeta might lead to the development of drug candidates against AD.     

添加钛、铌、锰、硫及镁对亚共晶灰铸铁初生奥氏体形核及生长的影响

共晶铸铁在共晶凝固时,熔体中碳的状态,即“C的微小集合体”已经被深入研究.然而时于与初生奥氏体密切相关的铁原子的状态,即“铁的微小集合体”却缺乏研究.本文作者提出,在亚共晶灰铸铁熔体中,初晶γ的形核受“Fe的富集部”的影响,而“Fe的富集部”的形成及消失与“C的微小集合体”有关.研究表明,初生奥氏体的形核过冷度、形核数和晶核生长形貌随工艺条件如过热度、保温时间和冷却速率而变化.本文讨论了在熔体的过热度、保温时间和冷却速率固定的条件下,钛、铌、锰、硫和镁这五种添加元素对亚共晶灰铸铁初晶γ的凝固过程的影响.     

The Association of Cholesterol Uptake and Synthesis with Histology and Genotype in Cortisol-Producing Adenoma (CPA)

Cortisol-producing adenoma (CPA) is composed of clear and compact cells. Clear cells are lipid abundant, and compact ones lipid poor but associated with higher production of steroid hormones. PRKACA mutation (PRKACA mt) in CPA patients was reported to be associated with more pronounced clinical manifestation of Cushing’s syndrome. In this study, we examined the association of histological features and genotypes with cholesterol uptake receptors and synthetic enzymes in 40 CPA cases, and with the quantitative results obtained by gas chromatography-mass spectrometry (GC-MS) analysis in 33 cases to explore their biological and clinical significance. Both cholesterol uptake receptors and synthetic enzymes were more abundant in compact cells. GC-MS analysis demonstrated that the percentage of compact cells was inversely correlated with the concentrations of cholesterol and cholesterol esters, and positively with the activity of cholesterol biosynthesis from cholesterol esters. In addition, hormone-sensitive lipase (HSL), which catalyzes cholesterol biosynthesis from cholesterol esters, tended to be more abundant in compact cells of PRKACA mt CPAs. These results demonstrated that both cholesterol uptake and biosynthesis were more pronounced in compact cells in CPA. In addition, more pronounced HSL expression in compact cells of PRKACA mt CPA could contribute to their more pronounced clinical manifestation.     

Calcium Chloride (CaCl2) as Catalyst for Asymmetric Organic Reactions

Pybox–CaCl₂ was found to be an efficient chiral catalyst for asymmetric 1,4-addition reactions of 1,3-dicarbonyl compounds with nitroalkenes, affording γ-nitro carbonyl compounds in high yields with high enantioselectivities. The reactions proceeded smoothly even in air, and were successfully applied to a continuous flow system.     

Organofunctionalized catalyst surfaces highly active and selective for carbon–carbon bond-forming reactions

This article illustrates two types of organofunctionalized heterogeneous catalysts for variety of organic carbon–carbon bond-forming reactions, summarizing our previous reports and also presenting new data. Organic amines with an alkoxysilane moiety were immobilized on inorganic silica-alumina surfaces (SA-NR₂) by simple silane-coupling reactions between the silica-alumina surface (SA) and the alkoxysilane. This SA-NR₂ acted as acid–base bifunctional heterogeneous catalysts for carbon–carbon bond-forming reactions, such as cyano-ethoxycarbonylation, Michael reaction of nitriles, and nitro-aldol reaction. These reactions did not occur with either SA or homogeneous amine compounds. In addition, the mixture of SA and homogeneous amine showed low catalytic activity due to undesirable acid–base neutralization reaction. Achiral organic silane-coupling reagents with a variety of functional groups were also immobilized on a SiO₂ surface that had been immobilized with chiral bis(oxazoline) (BOX), to which Cu ions were coordinated to make chiral Cu–BOX complexes on the SiO₂ surface. The SiO₂-supported Cu–BOX complex catalyst functionalized with achiral 3-methacryloxypropyltrimethoxysilane dramatically increased enantioselectivity in the asymmetric Diels–Alder reaction of cyclopentadiene and 3-acryloyl-2-oxazolidinone. The organofunctionalized catalysts showed much better performances for the C–C bond-forming reactions compared to the corresponding homogeneous systems. The heterogeneous catalysts thus obtained were characterized by solid-state ¹³C and ²⁹Si MAS NMR, FT-IR, UV/vis, XAFS, ESR, XRF, and elemental analysis.     

Phthalocyanine molecular nanowires that were prepared using porous alumina as a template: Development in the sample preparation procedure to evaluate electronic properties

We have proposed the synthesis of organic molecular nanowires using porous alumina as a template. We also proposed the use of a magnetic field to control the molecular packing structure in the nanowires. In this paper, we developed the method to evaluate the electronic properties of the nanowire of a phthalocyanine derivative that was synthesized using porous alumina as a template. The developed method facilitates the study in the organic molecular nanowires that were synthesized using templates and helps their use in future electronic devices.     

Depression of melting point of eutectic metal alloy by the interaction with polyacrylates in metal-polymer composites

The composites of polyacrylates and eutectic metal alloy composed by Bi, In, and Sn were prepared by mixing the metal and polymer above the melting point of the metal alloy (80 °C) with a homogenizer. Two melting peaks, which were assigned as the melting peak of the original metal alloy and that of the interfacial phase of the metal alloy interacting with polyacrylates (70 °C) by differential scanning calorimetry. Metal particles with the diameter of about 100 nm which were stabilized by the interfacial interaction with polyacrylates were observed by transmission electron microscopy. The melting peak at 70 °C was assigned as the melting peak of these small particles.     

EFFECTS OF OPERATIONAL CONDITIONS ON DRYING CHARACTERISTICS IN CLOSED SUPERHEATED STEAM DRYING

The effects of operational conditions on the drying performance in closed superheated steam drying were examined theoretically and experimentally. The vapor generated from the sample was circulated in the drying chamber. In the theoretical analysis, the replacement of air with vapor in drying chamber and the convective vapor transfer in sample were considered. At the start of drying, the drying chamber was filled with air. As the drying proceeded, the air was replaced with the vapor generated from sample. The calculated results explained the characteristics of experimental data. The pore diameter of sample had little effect on the drying characteristics. During the internal evaporation period, the evaporation occurred in the narrow zone, which moved from the surface to the bottom of sample. The convective vapor transfer in sample had a significant influence on the drying performance. The excess increments in temperature and velocity of drying gas hardly contributed to shortening the drying time.     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.