An Engineered Biliverdin-Compatible Cyanobacteriochrome Enables a Unique Ultrafast Reversible Photoswitching Pathway

Cyanobacteriochromes (CBCRs) are promising optogenetic tools for their diverse absorption properties with a single compact cofactor-binding domain. We previously uncovered the ultrafast reversible photoswitching dynamics of a red/green photoreceptor AnPixJg2, which binds phycocyanobilin (PCB) that is unavailable in mammalian cells. Biliverdin (BV) is a mammalian cofactor with a similar structure to PCB but exhibits redder absorption. To improve the AnPixJg2 feasibility in mammalian applications, AnPixJg2_BV4 with only four mutations has been engineered to incorporate BV. Herein, we implemented femtosecond transient absorption (fs-TA) and ground state femtosecond stimulated Raman spectroscopy (GS-FSRS) to uncover transient electronic dynamics on molecular time scales and key structural motions responsible for the photoconversion of AnPixJg2_BV4 with PCB (Bpcb) and BV (Bbv) cofactors in comparison with the parent AnPixJg2 (Apcb). Bpcb adopts the same photoconversion scheme as Apcb, while BV4 mutations create a less bulky environment around the cofactor D ring that promotes a faster twist. The engineered Bbv employs a reversible clockwise/counterclockwise photoswitching that requires a two-step twist on ~5 and 35 picosecond (ps) time scales. The primary forward P_fr → P_o transition displays equal amplitude weights between the two processes before reaching a conical intersection. In contrast, the primary reverse P_o → P_fr transition shows a 2:1 weight ratio of the ~35 ps over 5 ps component, implying notable changes to the D-ring-twisting pathway. Moreover, we performed pre-resonance GS-FSRS and quantum calculations to identify the Bbv vibrational marker bands at ~659,797, and 1225 cm⁻¹. These modes reveal a stronger H-bonding network around the BV cofactor A ring with BV4 mutations, corroborating the D-ring-dominant reversible photoswitching pathway in the excited state. Implementation of BV4 mutations in other PCB-binding GAF domains like AnPixJg4, AM1_1870g3, and NpF2164g5 could promote similar efficient reversible photoswitching for more directional bioimaging and optogenetic applications, and inspire other bioengineering advances.     

Different feeding and gustatory responses to ecdysone and 20-hydroxyecdysone by larvae of the silkworm,Bombyx mori

The feeding and gustatory responses to ecdysone and 20-hydroxyecdysone were investigated in the silkworm,Bombyx mori. 20-Hydroxyecdysone reduced feeding response strongly in fourth- and fifth-instar larvae, whereas ecdysone had no effect on feeding response. 20-Hydroxyecdysone stimulated the R receptor, the receptor to feeding deterrents, to a great degree. By contrast, ecdysone was much less effective for stimulating the R receptor. These results indicate that ecdysone and 20-hydroxyecdysone have different effects on feeding response due to different interactions with mouthpart chemoreceptors.     

Band Gap Modification of Diamond Photonic Crystals by Changing the Volume Fraction of the Dielectric Lattice

Photonic crystals with a diamond structure of epoxy lattices in which TiO₂-based ceramic particles are dispersed were fabricated by stereolithography. The periodicity of the lattice was designed to reflect electromagnetic waves in the gigahertz range. The volume fraction (β) of the dielectric lattice medium was modified from 14% to 33% by changing the rod diameter of the lattice. The photonic band gap was observed along Γ-L 〈111〉, Γ-X 〈100〉, and Γ-K 〈110〉 directions and the complete photonic band gap was formed at over β= 20%. The width of the forbidden gap increased gradually when the β increased over 14%, and reached 2.4 GHz at β= 33%. These results agreed with the band calculation using the plane wave expansion method.     

Synthesis and properties of bismaleimide resins containing ether bonds

New bismaleimides containing ether bonds were prepared. The thermal properties of the bismaleimides were investigated by differential scanning calorimetry (DSC). The effects of structure of the bismaleimides and curing conditions on the thermal and mechanical properties of the cured resins such as initial decomposition temperature (T_d), glass transition temperature (T_g), and flexural strength were studied. The introduction of ether bonds to bismaleimide resins decreased the brittleness of the resins without reductions in their heat-resistant properties.     

Advanced Sn/C composite anodes for lithium ion batteries

Metallic tin was deposited in fine particulate form on the surface of carbonaceous mesophase spherules (CMS) and in the pores of porous carbon by the decomposition and reduction of tin(II) 2-ethylhexanoate at 450 °C. The Sn/C composite powders obtained were used as anode materials for lithium ion cells. Electrochemical cycling tests of coin cells show that the dispersion of tin into the carbonaceous materials enhances the reversible capacity of the electrodes. The capacity retention at the 50th cycle is 91 % for Sn/CMS composite containing 22% tin, against 428 mAh g^–1 at the first cycle. With further increase in tin content, the capacity fade upon cycling is more rapid.     

Orientation in uniaxially drawn polystyrene plasticized by CO2 sorption

Uniaxial drawing experiments of the polystyrene films plasticized by a sorption of compressed CO₂ gas at pressures up to about 18 MPa were carried out with strain rates ε of 0.0290 and 0.0079 s^?1. The drawing was performed successfully with draw ratio λ up to 4 at the temperatures of 308.15, 318.15, 328.15, and 338.15 K. The Hermans orientation function f of the drawn samples was determined from the dichroic ratio measured by an infrared spectrophotmeter. While f value increases with increasing ε or λ, it decreases with increasing CO₂ pressure or temperature. © 1995 John Wiley & Sons, Inc.     

Fate of the chlorine and fluorine in a sub-bituminous coal during pyrolysis and gasification

The fate of the chlorine and fluorine present in a sub-bituminous coal from Indonesia during pyrolysis and gasification has been studied with fixed and entrained bed reactors. The rate profile for HCl evolved in the temperature programmed pyrolysis exhibits the main and shoulder peaks at 480 and 600 °C, respectively. Model experiments and subsequent Cl 2p XPS measurements show that HCl reacts with metal impurities and carbon active sites at 500 °C to be retained as inorganic and organic chlorine forms, from which HCl evolves again at elevated temperatures. It is suggested that the HCl observed in the coal pyrolysis may originate from the above-mentioned chlorine functionalities formed by secondary reactions involving the nascent char. In the CO₂ gasification of the 900 °C char at 1000 °C and 2.5 MPa, any measurable amounts of HCl and HF could not be detected even at a high conversion of 75 wt% (daf), suggesting the accumulation of these halogens in the residual char. When the coal is injected into an O₂-blown, entrained bed gasifier at 1200-1400 °C under 2.6 MPa, the partial oxidation proceeds to a larger extent at a higher O₂/coal ratio, whereas the chlorine and fluorine are enriched in the remaining char, and the extent of the enrichment at the latter stage of gasification is larger with the fluorine. The XPS measurements of the chars reveal the presence of the broad F 1 s peak, which can cover a wide range of binding energies attributable to inorganic and organic fluorine. The halogen enrichment during gasification is discussed in terms of secondary reactions of HCl and HF with char.     

Isotachophoretic analysis of surfactants

The qualitative and quantitative determination of anionic surfactants (sodium and lithium alkylsulfate, sodium dodecylbenzenesulfonate, sodium di-2-ethylhexyl sulfosuccinate, sodium and lithium perfluoroalkylcarboxylate, and lithium perfluorooctanesulfonate) were investigated by a capillary tube isotachophoresis using a potential gradient detector. The leading electrolyte solution was the mixture of acetonitrile and aqueous solution of histidine buffer containing calcium chloride. The terminating electrolyte solution was the aqueous solution of sodium octanoate. These electrolytes were effective for the analysis of the mixtures of strongly acidic surfactants.     

High-Resolution Electron Microscopy Observations of Stacking Faults in β-SiC

Structural images of the stacking faults in β-SiC were obtained with a high-resolution electron microscope. Stacking faults initially present in β-SiC powder particles were eliminated as grain growth proceeded at elevated temperatures.     

Interaction of cation-exchange membrane with polycation I. Poly(N-methyl-4-vinylpyridinium chloride)

We elucidated the effect of the molecular weight of poly(N-methyl-4-vinylpyridinium chloride) (PMVP) on its adsorbed or ion-exchanged amount on the cation-exchange membrane and the preferntial permselectivity of the membrane for sodium ion to calcium ion. The amount of the adsorbed or ion-exchanged PMVP increases with time and then attains to a definite value at a definite concentration. Also, the ultimate value increases with increasing the concentration of PMVP. When the molecular weight of PMVP is 3090, the ratio of the pyridinium groups of PMVP ion-exchanged with the sulfonic acid groups on the membrane surface to the total pyridinium groups of the cohered PMVP is in the range of 70–80%. The relative transport number of calcium ions to sodium ions(P_Na^Ca) decreases with increasing the amount of adsorbed or ion-exchanged PMVP and the numbe rof non-ion-exchanged pyridinium groups of PMVP and the number of non-ion-exchanged pyridinium groups of PMVP on the membrane surface. The smaller the molecular weight of PMVP, the more the adsorbed or ion-exchanged amount and the more preferable the permselectivity for sodium ion.