Transient Behavior of Gas Entrainment Caused by Surface Vortex

A compact sodium-cooled reactor is an important candidate as a fast breeder reactor (FBR) and has been investigated in the feasibility study of FBR cycle. Due to the compact sizing of the reactor vessel, gas entrainment at the free surface of sodium coolant becomes one of the significant issues for reactor design, and it is required to clarify the criterion of gas entrainment at free surface and the tolerance. In the present study, some visualization experiments were performed in a water-air system focusing on the gas entrainment due to surface vortex and its transient phenomena. Influences of horizontal velocity were clarified by the visualization. The gas entrainment due to the surface vortex occurs intermittently. Time trends of circulation and length of gas core for the intermittent surface vortices were measured by the particle image velocimetry and visualization. It was found that the gas core length extends with time delay to the increase of circulation around the vortex.     

Development of service-oriented products based on the inverse manufacturing concept

To achieve sustainability, resource consumption and waste generation must be drastically decreased. For societal acceptance, preservation of both quality of life and corporate profits are essential. One promising approach is to shift the source of value from the amount of product sold to the quality of services the product provides. This paper describes the need for redesigning recycling systems from a manufacturing perspective and then discusses the possibility of this "servicification" of products, describing our experience with prototype development. We discuss development of product prototypes and their business, using consumer facsimile machines as an example of "service-oriented products". Traditional thought presumes that only products comprising new materials and components are valuable. Consideration of a service-oriented product can serve as a stimulus to revise this mode of thought and to control delivery and quality of disposed products. This paper also provides a life cycle simulation of the developed service-oriented business. Simulation results indicate that service-oriented business can potentially reduce environmental impact while extending business opportunities from the viewpoint of whole product life cycles.     

Effects of supplemental energy on metabolic and immune measurements in periparturient dairy cows with Johne's disease

The present study was designed to evaluate whether feeding supplemental energy would improve the metabolic profile and alleviate some of the immunosuppression typically noted during the periparturient period in dairy cows with Johne's disease. Twelve dairy cows naturally infected with Mycobacterium paratuberculosis were fitted with rumen cannulas in late gestation and assigned to treatment groups: control, n = 6; or stuffed, n = 6. Cows in the control group were allowed to consume feed ad libitum. Cows assigned to the stuffed treatment group were also fed ad libitum but received additional total mixed rations by manually stuffing their rumens with refused feed to maintain dry matter intake of 2% body weight per day before calving and 2.5% body weight per day after calving. Serum nonesterified fatty acid levels were significantly decreased in stuffed cows compared with control cows, indicating that stuffing to maintain dry matter intake improved the energy balance in the cows. In addition, periparturient serum calcium and magnesium concentrations were significantly higher in stuffed cows. Stuffing modulated cell-mediated immunity by reducing lymphocyte proliferative responses to T-cell mitogens during early lactation. Stuffing resulted in an increase in the secretion of in vitro immunoglobulin by peripheral blood mononuclear cells after parturition when compared to control cows. These data demonstrate that energy balance is improved by providing additional energy in this manner and suggest energy supplementation can improve some aspects of immune function during the periparturient period.     

Application of microbial genes to recalcitrant biomass utilization and environmental conservation

Recent papers concerning the application of microbial genes to recalcitrant biomass utilization and environmental conservation are reviewed. Microbial genes have been integrated and expressed in plants and microorganisms. When cellulose-degrading enzyme genes are expressed in rice plants, the transgenic plants exhibit swollen cell walls which increases the digestibility of rice straw in the rumen. When genes encoding aromatic compound-degrading enzymes are expressed in plants, it is expected that aromatic compounds contaminating soil would be degraded during the growth of the transgenic plants. The former transgenic plants are utilized as feed and the latter for phytoremediation. Dockerin and cohesin interactions occurring in the cellulase complex, cellulosome, are applied to the construction of artificial enzyme complexes and protein purification by expressing the genes in transformed bacteria and/or silkworms, respectively. In the case of the forced expression of bacterial genes encoding chitinase and/or hydrogenase in the wild-type bacteria, chitin degradation and hydrogen gas production in the transformed bacteria occur at much higher rates than in the wild type.     

Determination of captafol,cyhexatin, 1-naphthylacetic acid and quintozene in apple,Japanese pear and melon by simultaneous extraction

A simple and rapid method is described for the determination of the non-registered pesticides, captafol, quintozene (PCNB), cyhexatin and 1-naphthylacetic acid (NAA), in fruits. These pesticides were extracted with acidified acetone, then captafol and PCNB were purified with a Florisil mini column and analyzed by GC-ECD. Cyhexatin was ethylated with ethylmagnesium bromide, and the ethyl derivative was analyzed by GC-FPD (Sn filter). NAA was purified with liquid-liquid extraction and determined by HPLC equipped with a fluorescence detector. These analytes were identified with GC/MS or LC/MS. The minimum identified concentration of the pesticides was below 0.2 ng per injection, which corresponds to a detection limit of below 0.02 microgram/g in the original samples. Recoveries of the pesticides spiked at 0.1 microgram/g into apple, Japanese pear and melon were greater than 61%.     

A demonstrative study for the wind and solar hybrid power system

In March 1995, a small scale wind and solar hybrid power system was installed at Ashikaga Institute of Technology. Until now, the authors have acquired the data of the output of the hybrid power plant along with wind speed, wind direction, and the solar radiation, in order to demonstrate a complementary relationship between solar energy and wind energy.After nine months operation of the system, the authors confirmed that there exists a complementary relationship between solar energy and wind energy. We also found, however, that the power output by wind does not have much prospect compared to that by solar cell especially in summer season in Ashikaga area.     

Desiccation survival of Listeria monocytogenes and other potential foodborne pathogens on stainless steel surfaces is affected by different food soils

Food processing environments are suspected to be the primary source of Listeria monocytogenes contamination of foods. We investigated the survival of L. monocytogenes on stainless steel that was soiled with food components (minced tuna, ground pork, and cabbage) followed by dehydration. Stainless steel coupons were inoculated with 10⁷ CFU/coupon and stored up to 30 days. In comparison with Staphylococcus aureus and Salmonella Typhimurium, L. monocytogenes demonstrated the highest survivability where about 3 log CFU/coupon remained at the end of the experimental period. While survival during the early storage period was markedly affected by both food-component attachment and food type, a long dehydration period diminished the effect of those.     

Molecular breeding of cellulolytic microbes, plants, and animals for biomass utilization

Cellulosic materials are the major components of fibrous biomass produced as a result of photosynthesis and are considered as a reservoir of solar energy and organic materials. In order to cope with the problems of food and energy shortages expected in the near future, biotechnologists are encouraged to develop new technologies for the more effective utilization of the world's sustainable resources, i.e., biomass. One way is to engineer microorganisms and animals with the capability of digesting and utilizing cellulosic materials, and plants which can be easily degraded by cellulolytic enzymes. In this article, we summarize recent studies on the molecular breeding of cellulolytic organisms for biomass utilization along with some considerations regarding cellulolytic enzymes.     

Cloning, sequencing and expression of an alpha-L-arabinofuranosidase from Aspergillus sojae

The arabinofuranosidase gene was cloned from the cDNA of Aspergillus sojae. It was found to contain an open reading frame composed of 984 base pairs (bp) and to encode 328 amino acid residues (aa). The cDNA sequence suggested that the mature enzyme is preceded by a 26-aa signal sequence and the molecular mass was predicted to be 32,749 Da. The A. sojae arabinofuranosidase consists of a single catalytic domain; it does not have a specific substrate-binding domain such as the xylan-binding domain reported in an arabinofuranosidase from Streptomyces lividans (Vincent, P. et al.: Biochem. J., 322, 845-852, 1997). The deduced amino acid sequence of the catalytic domain of the mature enzyme exhibits extensive identity with the catalytic domains of Streptomyces coelicolor (74%), Aspergillus niger (75%), S. lividans (74%), and Aspergillus tubingensis (75%), which are enzymes that belong to family 62 of the glycosyl hydrolases. The cloned AFdase gene was expressed in Escherichia coli BL21 (DE3) pLysS as a cellulose-binding domain tag fusion protein. The specific activity of the purified recombinant enzyme was 18.6 units/mg protein, which is one-fourth that of the enzyme purified from a solid-state culture of A. sojae.     

Cloning and sequence analysis of a gene (aly PG) encoding poly(alpha-L-guluronate)lyase from Corynebacterium sp. strain ALY-1

The aly PG gene, coding for a poly alpha-l-guluronate lyase (PG lyase) of Corynebacterium strain ALY-1, was cloned and sequenced. The gene consists of 768 bp encoding a signal peptide of 32 amino acids and a mature protein of 224 amino acids. Two disulfide bond cross-linkages were found to be formed between Cys-4 and Cys-51 and between Cys-200 and Cys-206 in the native PG lyase molecule. The deduced amino acid sequence of the Corynebacterium sp. aly PG gene exhibited 29% homology toward that of the Klebsiella pneumoniae, subsp. aerogenes aly A gene, with two conserved regions (the amino acid sequences from Y-102 to M-110 and from Y-221 to Q-229).