Study of miscibility,crystallization, mechanical properties,and thermal stability of blends of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)

Natural amorphous polymer poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3HB4HB) containing 41 mol % of 4HB was blended with poly(3‐hydroxybutyrate) (PHB) with an aim to improve the properties of PHB. The influence of P3HB4HB contents on thermal and mechanical properties of the blends was evaluated with differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, stress–strain measurement and thermo gravimetric analyzer. Miscibility of PHB/P3HB4HB blends was mainly decided by the contents of P3HB4HB. When P3HB4HB exceeded 50 wt %, the two polymer phases separated and showed immiscibility. The addition of P3HB4HB did not alter the crystallinity of PHB, yet it diluted the PHB crystalline phase as revealed by DSC studies. DSC and FTIR results showed that the overall crystallinity of the blends decreased remarkably with increasing of P3HB4HB contents. Decreased glass transition temperature and crystallinity imparted desired flexibility for the blends. The ductility of the blends increased progressively with increasing of P3HB4HB content. Thus, the PHB mechanical properties can be modulated by changing the blend composition. P3HB4HB did not significantly improve the thermal stability of PHB, yet it is possible to melt process PHB without much molecular weights loss via blending it with suitable amounts of P3HB4HB. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

水蒸汽二次活化对活性炭中孔结构的影响

以商业活性炭为原料，经水蒸汽二次活化，制备了3个不同温度和不同活化时间的样品，用热重－质谱连用技术对原料的热分解产物进行分析；用N2吸附脱附等温线，BJH中孔分析和as法考察活性炭孔径的变化，用FT－IR技术测定活性炭表面官能团的变化，用XRD技术研究活性炭中的乱层结构，用扫描电镜研究活性炭的表面形态，结果表明，活化时间的延长或活化温度的升高使得活性炭的孔径变大且分布发散，出现两个孔径分布峰，同时，孔容积增加，表面官能团和乱支结构变化不明显，电镜研究发现活性炭的表面逐步光滑，有孔之间的互融现象出现，在735摄氏度活化120min所制样品的孔径较为集中。     

Preparation and properties of water‐soluble polyester surfactants. II. Preparation and surface activity of silicone‐modified polyester surfactants

We prepared a novel series of water‐soluble silicone‐modified polyesters [poly(ethylene glycol) (PEG)–silicone polyesters] by reacting organopolysiloxane with a hydroxy‐terminated polyester. The polyesters were obtained by the polymerization of maleic anhydride and PEGs (molecular weights = 2000, 4000, 6000, 8000, and 10000). These water‐soluble PEG–silicone polyesters can be used as auxiliaries in dyeing process because they exhibit good surface activities such as surface tension, low foaming, and wetting power. The presence of these surfactants also retarded the rate of nylon dyeing with acid dyes. The retarding effect and low‐foaming property of these novel PEG–silicone polyesters make it possible for these surfactants to be used as leveling agents for modern nylon dyeing with acid dyes. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3005–3012, 2002     

PHOTOCATALYTIC OXIDATION OF ALDEHYDES/PCE USING POROUS ANATASE TITANIA AND VISIBLE-LIGHT-RESPONSIVE BROOKITE TITANIA

We have synthesized an annealed porous aerogel titania (LUAG2), which demonstrates a very high photocatalytic activity for aldehydes and perchloroethylene (PCE) photocatalytic oxidation (PCO) in gas phase under blacklight and fluorescent light irradiation. LUAG2 has a BET surface area of 237 m²/g and a porosity of 0.31 (volume fraction). X-ray diffraction (XRD) analysis shows LUAG2 is nearly pure anatase. It has improved the destruction of PCE and aldehydes as a group by 10-34% with black light compared to Degussa P-25. The optimum water vapor to butyraldehyde molar ratio is around 1/3. LUAG2 also shows better mineralization to CO₂ than Degussa P-25 TiO₂ does. Under irradiation of a 4 W fluorescent lamp LUAG2 gives a consistently higher conversion than that of Degussa P-25. The highly active photocatalyst indicates potential applications in indoor and outdoor environmental pollution control. A visible-light-responsive TiO₂, NTB 200, is also investigated for comparison purposes.     

改性硝酸铵的工业制备方法及其性能

硝酸铵饱和溶液中加入表面活性剂辛基三甲基溴化铵，采用真空膨胀结晶技术工业制备一种新型改性硝酸铵，并介绍其性能特点。     

Bathymetry and siltation rate for Dokan Reservoir,Iraq

The Dokan Reservoir dam is a concrete cylindrical arch with gravity abutments, located on the Lesser Zab River about 60 km from the city of Sulaimani in north‐eastern Iraq. A bathymetric survey was conducted in November 2014 for a period of 10 days, using an echo sounder of 200‐kHz single beam. The survey results indicated an annual average sediment deposition of 3.8 million m³. Thirty‐two sediment samples were collected from the reservoir bed. The ratio of gravel, sand, silt and clay was 15:14:48:23, respectively. The reservoir bed is covered mainly with silt. The sediments are composed of silty clay (77.6%), silty sandy clay (10%), sandy gravely silty clay (1.2%) and gravely sandy silty clay (1%).     

Development of a system‐based water balance model to assess interrelated physical and anthropogenic constraints in lake and reservoir watersheds,applied to Coeur d'Alene Lake,Idaho, USA

This study presents a methodology for the development of a water balance model that uses publicly available data in a manner useful to water scientists and managers who manage complex lake and reservoir watersheds. The approach was applied to Coeur d'Alene Lake, a naturally occurring lake that is controlled by a dam located on its outlet (Spokane River) in North Idaho, USA. As in many other areas, the region surrounding Coeur d'Alene Lake has experienced high rates of population growth in recent years, and there is concern that, as consumptive water use increases, the lake will eventually not be able to be managed to simultaneously maintain the federally mandated minimum flow requirements in the Spokane River and also maintain the target summertime elevation of 2128 feet (648.6 m) for recreation and hydropower purposes. The complexity caused by the competing uses at Coeur d'Alene Lake makes it an excellent case study for similarly characterized watersheds. Both a natural flow model and regulated elevation model were developed, and sensitivity analysis was conducted on both models to evaluate which lake processes have the greatest effects on lake elevation, thereby requiring the most attention. A ‘low‐flow’ scenario was modelled to demonstrate the usefulness of the model and to inform Coeur d'Alene Lake regional stakeholders regarding the interrelationship between current water policy and the lake's physical behaviour under stressed conditions that could result from climate change. Model result indicates that, while lake elevation may be maintained at the summertime elevation of 2128 feet (648.6 m) under a low‐flow scenario, the outflows in the Spokane River start to approach the minimum flow requirements in the month of August. The developed approach is useful where publicly available data exist and allows for economic, yet rigorous, water resources systems evaluation without requiring significant field data collection.     

Benchmarking Fluvial Dynamics for Process‐Based River Restoration: the Upper Rhine River (1816–2014)

Multi‐temporal analysis of river‐floodplain processes is a key tool for the identification of reference conditions or benchmarks and for the evaluation of deviations or deficits as a basis for process‐based river restoration in large modified rivers. This study developed a methodology for benchmarking fluvial processes at river segment level, focusing on those interrelations between morphodynamics (aggradation, erosion, channel shift) and vegetation succession (initial, colonization, transition) that condition habitat structure. Habitat maps of the free‐flowing Upper Rhine River downstream from Iffezheim dam (France–Germany border) were intersected with a geographic information system‐based approach. Patches showing trajectories of anthropization, changeless, progression and regression allowed for the identification of natural and human‐induced processes over almost 200 years. Before channelization, the riverine system was characterized by a shifting habitat mosaic with natural heterogeneity, high degree of surface water connectivity and equilibrium between progression and regression processes. On the other hand, the following 175 years of human interventions led to severe biogeomorphologic deficits evidenced by loss of natural processes and habitat heterogeneity, hydrological disconnection between the river and its floodplain and imbalance of progression versus regression dynamics. The main driving forces of change are found in hydromorphological impacts (channelization, regulation and hydropower plant construction). Regression processes are now almost absent and have to be the objective of process‐based river restoration measures for the studied river‐floodplain system. A sustainable view on water management and river restoration should aim at a more resilient riverine system by balancing the recovery of natural processes with societal needs. Copyright © 2016 John Wiley & Sons, Ltd.     

多因素耦合作用下合成β-sialon材料的工艺优化

以粘土矿物为主要原料,采用碳热还原氮化工艺制备出高品质β-sialon陶瓷粉体,并对多因素耦合状态下材料合成的工艺优化,微结构与相组成以及热力学反应机理作了系统研究。理论分析与实验结果均表明：随着合成温度的增加,产物中物相经历了O’,X相(中间杂相)→β相→15R,12H的sialon多型体与Si3N4和AIN的一系列相转变,导致合成工艺的复杂性。正交设计实验结果分析表明：控制保温时间和合成温度,是获得高含量长柱状β-sialon的有效途径;通过模式识别能快速寻找出性能优化区域,1500℃保温5h可以获得单一sialon相。结合逆映照与人工神经网络技术,可对所需要的新工艺参数进行预报。