基于蒙特卡罗模拟的费用与进度集成风险分析——项目风险分析系列论文（二）

基于蒙特卡罗模拟的费用与进度集成风险分析,可以获得更为精确的费用估算结果,同时得到进度风险分析的结果,使得风险分析的应对措施可以针对时间类与费用类风险采取不同的措施.笔者结合国外相关文献的成果,讨论并分析了采用蒙特卡罗模拟的费用与进度集成风险分析的顺序分析程序与一体化分析程序两种分析方法及其特点,并依据讨论结果推荐优先选用顺序分析程序.     

新型QPG1×8000-85型启闭机的研究

通过对启闭机关键部件卷筒的受力分析,研制出一种新的单吊点、双驱动、超大容量、高扬程启闭机.从理论上分析了它的整体工作性能.所依托工程的使用情况表明,该机达到了设计要求.     

Ta-2．5W焊接工艺试验研究

通过对Ta-2.5W难熔重金属换热管的一系列焊接工艺试验研究,掌握了钽材的特殊焊接技术工艺和要求,满足了今后制造和修复苯胺装置中硫酸蒸发器管束的需要。     

La doping effects on intergrowth Bi2WO6–Bi3TiNbO9 ferroelectrics

La doping effects on intergrowth Bi₂WO₆–Bi₃TiNbO₉ ferroelectric ceramics were studied by X-ray diffraction, electron probe microanalysis and dielectric spectroscopy. It was found that the La³⁺ distribution, ferroelectric phase transition and dielectric relaxation behavior are apparently affected by La doping. With increasing La³⁺ content, the site of dopant ion varies, the grain growth of Bi₅TiNbWO₁₅ is restrained, the Curie temperature is reduced and broadened. Furthermore, two dielectric relaxation loss peaks were observed both in temperature and frequency spectra. The calculated relaxation parameters revealed the oxygen vacancy related to the relaxation process.     

氧化铝厂渣浆泵机械密封的失效形式及改进措施

本文介绍了渣浆泵机械密封的失效形式,并根据长期现场工作经验,分析了机械密封泄漏的主要原因,据此提出了改进措施,通过对动静环密封面倒角,改变密封面尺寸及载荷系数后有效地解决了由于径向跳动过大而引起的密封面刮碰擦裂的失效问题。     

企业开展质量成本研究工作的思考

质量成本是指企业为保证产品质量而支出的一切费用，以及产品质量未达到规定的标准而造成的一切损失的总和。开展质量成本研究工作是企业深化质量管理和成本管理的一条有效途径。     

岩盐钻井水溶双井连通开采工艺的研究与推广

文章就全国井矿盐采区多年的开采工艺技术，进行了系统的研究与总结，并提出了岩盐钻井水溶开采双井连通的各种开采工艺及其关键技术，具有很强的适用性和推广价值。     

Formation of mushroom-like ZnO microcrystals through a solution calcination process

Mushroom-like ZnO microcrystals have been prepared via a solution calcination route, using Zn(NO₃)₂ as Zn source in the absence of any surfactants, templates or catalysts. This is the first example to prepare mushroom-like crystals as semiconductors, which are expected to show particular physical properties. The ZnO products were investigated by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy and photoluminescence (PL) spectrum measurements. A suitable concentration of Zn(NO₃)₂ solution was important for the growth of the mushroom-like products. The reported synthetic procedure is straightforward and inexpensive, and thus can be readily adopted to produce large quantities of mushroom-like ZnO microcrystals.     

Corrosion Condition Evaluation at Muddy Creek Bridge

Corrosion rates were measured at the exposed spots of rebars near three corners of Muddy Creek Bridge located in northern West Virginia using a 3LP device. Also, chloride contents of the concrete samples taken from the vicinity of the spots were analyzed using a wet chemical method that had been developed in this study. The average corrosion rate over the three spots was 4.66 mA/m2, which is in the range of corrosion damage possible in 10–15 years. The average chloride content of the concrete over the three spots was 703 parts per million (ppm), which is well above the threshold limit value of 260 ppm. Although the corrosion rate measurement method using a 3LP device is by manual operation, it is found to be reliable and effective, and, thus, recommended for future studies of this kind of research. The wet chemical method developed in this study is found to be effective.