BP/THF引发体系引发降冰片烯与马来酸酐可见光自由基共聚合

研究了BP/THF引发体系引发降冰片烯(NB)与马来酸酐(MA)自由基光聚合性能.考察了单体和引发剂浓度、第三单体的加入和氛围对共聚合收率的影响.采用红外光谱(FTIR)、核磁共振谱(NMR)、元素分析和高效凝胶液相色谱(GPC)对聚合物进行了表征与分析.在单体比为1:1时,共聚物中NB和MA的含量分别为54.2%和47.8%.     

Effect of particle size distribution on green properties during high velocity compaction

Iron powders with two different particle size distributions were compacted by high velocity compaction. The influences of particle size distribution and impact velocity on green properties, including green density, springback, tensile strength and bending strength etc., were studied with scanning electron microscopy (SEM) and a computer controlled universal testing machine. The results show that the particle size distribution and the impact velocity strongly affect its properties. Wider size distribution results in green compact with higher density and better strength. Furthermore, springback of compacts is lower produced by the powder with wider size distribution, especially for radial springback. As impact velocity increases, its green density and green strength gradually increases, but the increasing rate of density decreases gradually. No special relation is found between springback and impact velocity. In addition, the axial springback and the bending strength are higher than the radial springback and the tensile strength, respectively.     

P(MMA-AN)/TiO2复合粒子的制备及光催化性能

采用原位乳液聚合方法制备了基于共价键结合的P(MMA-AN)/TiO2复合粒子,红外光谱和热失重分析结果表明P(MMA-AN)在TiO2表面接枝率为15.9%。以甲基橙溶液为目标污染物,研究了P(MMA-AN)/TiO2复合粒子和TiO2对甲基橙的吸附和光催化降解甲基橙溶液的性能,结果表明:两种粒子对甲基橙的吸附都很少;在相同时间内,P(MMA-AN)/TiO2复合粒子对甲基橙溶液的降解性能优于TiO2,紫外光照180 min后,P(MMA-AN)/TiO2复合粒子对甲基橙溶液的降解率达到了88%,而TiO2仅为74%。     

Development of single drive electrode electrical resistance tomography system

A new electrical resistance tomography system has been designed using the single drive electrode method. The bidirectional pulse current is adopted in this system as the exciting current. The model of this new method has been set up in ANSYS and validated by simulation and actual measured data. Based on this model, the influence of medium resistivity and connected resistance as well as the influence of medium distribution on the measured data is studied. The experimental results and the reconstructed images are presented at last to testify to the reliability of the new system and the feasibility of the new method.     

Novel transparent and flexible nanocomposite film prepared from chrysotile nanofibres

In the present study, chrysotile nanofibres, obtained from physicochemical dispersion of natural chrysotile, were used to prepare nanofibre sheets by vacuum filtration. As-prepared sheets were then impregnated by UV-curable resin and cured by ultraviolet light to fabricate the flexible and transparent nanocomposite films. Observed from SEM, the transparent films showed a smooth surface and a typical sandwich structure in cross section, viz. nanofibre sheet filled with resin was sandwiched by two layers of resin. XRD patterns indicated the amorphous nature of cured resin and characteristic crystallographic structure of chrysotile in nanocomposite films. Though the nanofibre sheets were white in colour, and nanofibre contents in nanocomposites were as much as 43.4 wt%, the nanocomposite films displayed an excellent optical transparency with about 85% light transmittance in the visible light range. Tensile tests showed that the addition of nanofibres resulted in a great improvement in mechanical strength of the nanocomposite films; with the increase of nanofibre contents, the modulus and tensile strength of nanocomposite films increased gradually.     

超声波流量测量技术及发展

本文叙述了超声波流量测量的原理、基本测量方法以及传统的多普勒和时差法超声波流量计的缺陷和测量局限性，分析了超声波流量测量最新进展所采取的新的测量技术和方法，并介绍了超声波相关流量计的原理和技术特点．     

Application of selective implantation in Al0.5Ga0.5As/In0.25Ga0.75As/GaAs pseudomorphic single quantum wire structures

A pseudomorphic Al0.5Ga0.5As/In0.25Ga0.75As/GaAs asymmetric quantum wire (QWR) structure was grown on GaAs V-grooved substrate by low pressure metal organic vapor phase epitaxy. The formation of crescent shaped QWRs at the bottom of the V-grooves was confirmed by both transmission electron microscopy and photoluminescence (PL) spectra. The temperature dependence of PL spectra demonstrated a fast decrease of the sidewall quantum well PL intensity with increasing temperature, which originates from relaxation of carriers from well to wire region. The self-aligned dual implantation technique was successfully used to selectively disable the adjacent quantum structures. Decrease of the PL intensity of QWR at 8 K was observed after selective implantation, which resulted from a decreased number of carriers relaxed from adjacent quantum structures.