Fabrication,characterization, and performance of YbDSB ternary compounds for IT‐SOFC applications

(Yb₂O₃)_x(Dy₂O₃)_y(Bi₂O₃)_1?x?y (0.04≤x+y≤0.20) powders (xYbyDSB) were synthesized by modified sol‐gel Pecchini method. The powders were characterized for structural, surface morphological, thermal, and electrical properties and power density measurements by means of X‐ray diffraction (XRD), scanning electron microscopy (SEM), differential thermal analysis/thermal gravimetry (DTA/TG), and impedance spectroscopy, respectively. Lattice parameters and crystalline size of δ‐phase of Yb₂O₃‐ and Dy₂O₃‐doped Bi₂O₃ samples were calculated from the X‐ray diffraction data. Surface and grain properties of the related phases were determined by SEM analysis. In the investigated system, the maximum electrical conductivity was observed as σ=0.954 S cm^?1 for 6% mol Yb₂O₃ and 6% mol Dy₂O₃ at 800°C among all δ‐YbDSB systems. Cathode supported electrochemical cell was fabricated and 6Yb6DSB was used as the electrolyte. Maximum power density of single cell with an active area of 1.5 cm² is 72.50 mW/cm² at 700°C.     

Game of protocols: Is QUIC ready for prime time streaming?

Quick User Datagram Protocol (UDP) Internet Connections (QUIC) is an experimental and low‐latency transport protocol proposed by Google, which is still being improved and specified in the Internet Engineering Task Force (IETF). The viewer's quality of experience (QoE) in HTTP adaptive streaming (HAS) applications may be improved with the help of QUIC's low‐latency, improved congestion control, and multiplexing features. We measured the streaming performance of QUIC on wireless and cellular networks in order to understand whether the problems that occur when running HTTP over TCP can be reduced by using HTTP over QUIC. The performance of QUIC was tested in the presence of network interface changes caused by the mobility of the viewer. We observed that QUIC resulted in quicker start of media streams, better streaming, and seeking experience, especially during the higher levels of congestion in the network and had a better performance than TCP when the viewer was mobile and switched between the wireless networks. Furthermore, we measured QUIC's performance in an emulated network that had a various amount of losses and delays to evaluate how QUIC's multiplexing feature would be beneficial for HAS applications. We compared the performance of HAS applications using multiplexing video streams with HTTP/1.1 over multiple TCP connections to HTTP/2 over one TCP connection and to QUIC over one UDP connection. To that effect, we observed that QUIC provided better performance than TCP on a network that had large delays. However, QUIC did not provide a significant improvement when the loss rate was large. Finally, we analyzed the performance of the congestion control mechanisms implemented by QUIC and TCP, and tested their ability to provide fairness among streaming clients. We found that QUIC always provided fairness among QUIC flows, but was not always fair to TCP.     

Effects of cavity disinfectants on bond strength of an etch-and-rinse adhesive to water- or ethanol-saturated sound and caries-affected dentin

Objective: To evaluate the effect of cavity disinfectants on the immediate microtensile bond strength (μTBS) of an etch-and-rinse adhesive to water- and ethanol-saturated sound and caries-affected dentin (CAD). Material and Methods: Thirty-six human molars were sectioned to expose 1/3 of the mid-coronal dentin surface. Sound (n = 18) and CAD (n = 18) specimens were divided into six groups each (n = 3): one positive control (sound), one negative control (CAD), and five experimental groups each. In the control group, dentin surfaces were bonded using an etch-and-rinse adhesive with a traditional water-wet bonding technique. In the experimental groups, ozone was applied before etching and chlorhexidine after etching. In the ethanol-wet bonding groups, acid-etched dentin surfaces were treated with ethanol. Following adhesive application and composite buildups, bonded specimens were sectioned to form sticks. Failure modes were analyzed using a stereomicroscope. Results: The water-wet bonded sound control group yielded the highest μTBS among all groups (p < 0.001). The lowest μTBS values were observed in the ozone groups (p < 0.05). The ethanol-wet bonded CAD group exhibited a higher μTBS than the water-wet bonded negative controls. Although compared to the positive control, chlorhexidine decreased the μTBS (p < 0.05), an increase with no significant difference was observed in the negative control (p > 0.05). Conclusions: The μTBS values of CAD were lower than those of sound dentin. Ethanol-wet bonding improved the μTBS of CAD. Ozone application reduced the μTBS in both sound and CAD; chlorhexidine improved the immediate μTBS after etching in CAD.     

Copper(II) and zinc(II) biosorption on Pinus sylvestris L

The biosorption properties of copper(II) and zinc(II) onto a cone biomass of Pinus sylvestris L. was investigated by using batch techniques. The biosorption studies carried out with single metal solutions. The removal of copper(II) and zinc(II) from aqueous solution increased with pH and sharply decreased when pH of the solution was decreased. The maximum biosorption efficiency of P. sylvestris was 67% and 30% for Cu(II) and Zn(II), respectively. Batch kinetic and isotherm of biosorption metal ions were investigated. The second-order kinetic model was used to correlate the experimental data. The Freundlich and Langmuir model can describe the adsorption equilibrium of metal(II) on cone biomass. The biosorption constants were found from the Freundlich and Langmuir isotherms at 25 degrees C. It is found that the biosorption data of metals on cone biomass fitted both the Freundlich and Langmuir adsorption models.     

Electrical conduction properties of Co-doped ZnO nanocrystalline thin films

The temperature dependent conductivity behavior of 15% Co and 25% Co-doped ZnO nanocrystalline thin films prepared by spin-coating method was examined. It was found that the conductivity shows a change when the Co concentration varies from 15 to 25%. The observed increase of conductivity with increasing Co concentration was interpreted through the grain boundary conduction model. The temperature dependent conductivity of the films was analyzed in term of formulas in consistence with grain boundary conduction model. With rising temperature for 25% Co doped ZnO, a transition from the region in which crystallites are only partially depleted to the region in which the crystallites are entirely depleted was observed around 375 K. Some improtant electrical parameters were determined for the films.     

The effect of Pr addition on superconducting and mechanical properties of Bi-2212 superconductors

In this work, the effects of Pr doping on the superconducting, structural and mechanical properties of the samples are analyzed. Pr doped Bi-2212 superconductors are obtained using solid state reaction method. Dc resistivity measurements are made to investigate the superconducting properties, microhardness measurements are made to analyze the mechanical properties, XRD and SEM measurements are done for crystal structure determination and calculation of the lattice parameters. Using EDS measurements, the change in the elemental composition with doping is analyzed. The Vickers microhardness is calculated for undoped and doped samples. The experimental results of the microhardness measurements are analyzed using Kick’s Law, PSR (proportional specimen resistance), modified PRS (MPSR) and Hays–Kendall (HK) approach. The microhardness values of the samples decrease with Pr addition. The results can be successfully explained by HK approach.     

Examination of Dyeing Properties of the Dyed Cotton Fabrics with Barberry (Berberis vulgaris L.)

ABSTRACT

In this study, it was aimed at investing the cotton fabrics dyed with different percentages of the roots of barberry (Berberis vulgaris L.) via gall oak (Quercus infectoria Olivier; 10% and 20%) and aluminum sulfate (Al₂(SO₄)₃; 6%) mordants. The dyeing process was performed with the roots of barberry in the range of 10–100%. A reversed phase high performance liquid chromatography with diode array detection method was utilized for the identification of dyes present in the sample extracts. Natural yellow-dyed cotton samples were studied calorimetrically and their color coordinates L*, a*, b*, C*, h, K/S, and ?E* values were given.     

Effect of Cobalt and Nickel Doping on Structural and Magnetic Properties of Iron Oxide Nanoparticles

Two series samples of Iron Oxide nanoparticles doped with nickel and cobalt with different doping values (x?=?0.01; 0.03; 0.05 and 0.07), were successfully synthesized by using sol–gel method, and then they were characterized by X-ray diffraction, scanning electron and vibrating sample magnetometer (VSM). X-ray diffraction analysis of two series samples showed the formation α-Fe₂O₃ nanoparticles, accompanied by two phases iron spinels, CoFe₂O₄ and NiFe₂O₄. In addition, the variations in grain size were observed for both two series. The observation by scanning electron microscopy reveals a change in the morphology of the grains of all the samples doped, which confirm the cobalt and nickel effect on the morphology of iron oxide nanoparticles. Magnetic measurements which were measured by VSM showed significant magnetic parameters such as coercivity and magnetization besides the ferromagnetic behavior of both two series doped with Cobalt and Nickel.