IMAGE仪器MRX站A/D板电路分析及故障排除

通过对IMAGE仪器MRX站A／D板的电路分析，利用综合测试和分析诊断程序，并借助示波器和万用表，针对不同的故障，找出A／D板产生故障的根源，切实有效地排除故障。     

适于复杂信息融合系统的近似联合概率数据关联算法

文中在B.Zhou提出的直接概率计算(DC)和近似概率计算(AC)算法基础上提出了一种新的近似多传感器多目标联合概率数据关联算法。近似概率法是以一个目标为中心的近似聚为构造互联事件的起点，并在计算中将DC和AC结合得到的一种全邻的点迹—航迹关联算法，它能有效地提高目标点迹—航迹的关联正确率，在计算时耗上较完全联合概率法快得多，能满足工程中实时性的要求。将其在杂波下目标密集、航迹复杂的数据融合系统中进行实验，对关联正确率，关联耗时等与最近邻法进行了比较，效果较好。     

塑料片材的分切和分切对策

随着社会生产力的不断提高,人们生活水平的飞跃上升,特别是我国加入WTO以来,国际贸易更加繁忙,塑料包装的用量得到了空前的扩大,并呈现出快速发展的趋势。同时由于它们的迅速发展,对它们的要求已越来越严。而塑料包装中除了塑料容器外,几乎是片和膜包装,如热成型制品要用到各种塑料片材;软包装制品和彩印复合要用到各类塑料膜。而在生产塑料     

Examination of the role of oxygen in the photografting of methacrylic acid on a polyethylene film with a mixed solvent consisting of water and organic solvents

The photografting of methacrylic acid (MAA) on a linear low‐density polyethylene film (thickness = 30 μm) under air and nitrogen atmospheres was investigated at 60°C in mixed solvents consisting of water and an organic solvent, with xanthone as a photoinitiator. The organic solvents used were acetone, methanol, tetrahydrofuran, and dioxane. A maximum percentage of grafting occurred at a certain concentration of the organic solvent in the mixed solvent. This was observed for the systems under both air and nitrogen. The grafting reaction under air exhibited an induction period, but the rate of grafting after the period was greater than that under nitrogen. The formation of poly(ethylene peroxide)s by photoirradiation seemed to be a factor for the accelerated photografting under air. On the basis of attenuated total reflection infrared spectroscopy and scanning electron microscopy of the grafted film, the MAA‐grafted chains of the sample prepared under air tended to penetrate more deeply inside the film than those of the sample prepared under nitrogen. The resulting grafted films exhibited a pH‐responsive character: the grafted films shrank in an acidic medium but swelled in alkaline medium. This was evaluated from measurements of dimensional changes in the grafted films. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 992–998, 2003     

Joint coding-precoding with low-complexity turbo-decoding

We combine error-control coding with linear precoding (LP) for flat-fading channels, as well as for wireless orthogonal frequency-division multiplexing transmissions through frequency-selective fading channels. The performance is analyzed and compared with the corresponding error-control-coded system without precoding. By wedding LP with conventional error-control coding, the diversity order becomes equal to the error-control code's minimum Hamming distance times the precoder size. We also derive a low-complexity turbo-decoding algorithm for joint coded-precoded transmissions. We analyze the decoding complexity and compare it with an error-control-coded system without LP. Extensive simulations with convolutional and turbo codes for HiperLan/2 channels support the analysis and demonstrate superior performance of the proposed system.     

Hybrid switching and p-routing for optical burst switching networks

One promising switching technology for wavelength-division multiplexing optical networks is optical burst switching (OBS). However, there are major deficiencies of OBS. (1) The delay offset between a control message and its corresponding data burst is based on the diameter of a network. This affects network efficiency, quality-of-service, and network scalability.( 2) OBS adopts one-way resource reservation scheme, which causes frequent burst collision and, thus, burst loss. We address the above two important issues in OBS. In particular, we study how to improve the performance of delay and loss in OBS. To reduce the end-to-end delay, we propose a hybrid switching scheme. The hybrid switching is a combination of lightpath switching and OBS switching. A virtual topology design algorithm based on simulated annealing to minimize the longest shortest path through the virtual topology is presented. To minimize burst collision and loss, we propose a new routing algorithm, namely, p-routing, for OBS network. The p-routing is based on the wavelength available probability. A path that has higher available probability is less likely to drop bursts due to collision. The probability-based p-routing can reduce the volatility, randomness, and uncertainty of one-way resource reservation. Our studies show that hybrid switching and p-routing are complementary and both can dramatically improve the performance of OBS networks.     

一个面积和功耗优化且适用于10/100 Base-T以太网的CMOS时钟恢复电路

提出了一个新的用于10 / 10 0 Base- T以太网中面积和功耗优化的时钟恢复电路.它采用双环路的结构,加快了锁相环路的捕获和跟踪速度;采用复用的方式,通过选择信号控制电路可分别在10 Mbps或10 0 Mbps模式下独立工作且能方便地实现模式间的互换,与采用两个独立的CDR电路相比节省了一半的面积;同时,电路中采用一般的延迟单元来取代DL L,并能保证环路性能不随工艺温度等条件引起的延迟单元、延迟时间的变化而变化,从而节省了功耗.Hspice模拟结果显示,在Vdd=2 .5 V时,10 0 Mbps模式下电路的功耗约为75 m W,稳态相差为0 .3 ns;10 Mbps模式时电路功耗为5 8m W     

考虑加筋切向阻力的土坡稳定分析

目前在加筋边坡的极限平衡稳定分析中,认为加筋中产生的预应力能约束土体的运动或者能使抵抗土体运动的阻力增加,而对于加筋的切向阻力作用却没有考虑。主要讨论了在加筋土坡稳定分析时,加筋的切向阻力在加筋工程中起到的作用。认为在加筋边坡的极限平衡稳定分析中,也应考虑加筋的切向阻力作用;提出了计算公式,编制了相应的程序,给出了算例。     

液动旋冲接头冲击功测试方法研究

液动旋冲接头性能参数是旋冲接头设计的主要依据之一，如何对液动旋冲接头的参数进行检测是非常重要的工作。在分析和比较了测试液动旋冲接头性能参数各种方法的基础上，选择了冲击力法来进行破岩液动旋冲接头的性能参数测试，以YD系列测力传感器为检测元件，建立了一套比较完善的自动检测系统。分析了影响单次冲击功测试的因素，得出了测试旋冲接头的性能参数的影响规律。