一维炉系统的测试实验

一维炉是一种研究煤的热解燃烧和结渣等方面的实验系统,可用于模拟电厂煤粉的燃烧特性。以元宝山褐煤为燃料,介绍了一维炉的结构和功能,并对系统的可靠性进行了验证,利用烟气分析仪及热重分析仪对燃烧后的尾部烟气及灰渣进行了分析测定。结果表明:尾部烟气含氧量与灰渣可燃部分剩余量均在理论计算值的误差允许范围内,说明一维炉密封良好,系统内各部分正常运行,对维炉的调试和研究具有一定的参考意义。     

On the Survivability of Self-repairing Control System for a Hybrid Underwater Vehicle

A hybrid remotely operated underwater vehicle （HROV） capable of working to the full ocean depth has been developed. In order for the vehicle to achieve a certain survivability level, a self-repairing control system （SRCS） has been designed. It consists of two basic technologies, fault diagnosis and isolation （FDI） and reconfigurable control. For F＇DI, a model-based hierarchical fault diagnosis system is designed for the HROV. Then, control strategies which reconfigure the control system at intervals according to information from the FDI system are presented. Combining the two technologies, it can obtain the fundamental frame of SRCS for the HROV. Considering the hazardous underwater environment at the limiting depth and the hybrid operating modes, an assessment of the HROV＇ s survivability is vitally needed before it enters operational service. This paper presents a new definition of survivability for underwater vehicles and develops a simple survivability model for the SRCS. As a result of survivability assessment for the SRCS, we are able to figure out the survivability of SRCS and make further optimization about it. The methodology developed herein is also applicable to other types of underwater vehicles.     

Temperature Dependence of the Magnetocrystalline Anisotropy in Nd_2Co_(14)B Compound

Easy and hard magnetization curves of Nd_2Co_(14)B compound have been measured withextracting-sample-magnetometer(μ_0H_(max)=6T)at 10～300 K.Magnetic anisotropy constants K_1 and K_2have been determined by fitting the hard magnetization curves,in which only K_1 ,K_2 and misalignment anglehave been taken as fitting parameters.The values of K_1 and K_2 at 4.2 K were derived by extrapolation.Anisotropy coefficients,x_2~° and x_4~°were derived from the anisotropy constants.The anisotropy constant K_2increases rapidly with increasing temperature when TT_(sr).The temperature depen-dence of the magnetic anisotropy coefficient x_2~° was fitted with the formula.The anisotropy coefficients x_2~°can be well described by the tenth-power law from 4.2 K to T_(sr)and by the sixth-power law from T_(sr_ to 300 K.     

A modular designed bolt tightening shaft based on adaptive fuzzy backstepping control

This paper presents a modular designed autonomous bolt tightening shaft system with an adaptive fuzzy backstepping control approach developed for it. The bolt tightening shaft is designed for the autonomous bolt tightening operation, which has huge potential for industry application. Due to the inherent nonlinear and uncertain properties, the bolt tightening shaft and the bolt tightening process are mathematically modeled as an uncertain strict feedback system. With the adaptive backstepping and approximation property of fuzzy logic system, the controller is recursively designed. Based on the Lyapunov stability theorem, all signals in the closed-loop system are proved to be uniformly ultimately bounded and the torque tracking error exponentially converges to a small residue. And the effectiveness and performance of the proposed autonomous system are verified by the simulation and experiment results on the bolt tightening shaft system.     

Study of diffusion mobilities of Nb and Zr in bcc Nb–Zr alloys

On the basis of the available thermodynamic parameters, the atomic mobilities of Nb and Zr in bcc Nb–Zr alloys are critically assessed as functions of temperatures and compositions by the CALPHAD method, where self-diffusion coefficients, impurity diffusion coefficients, tracer diffusion coefficients, interdiffusion coefficients and concentration curves are simultaneously optimized. Comparisons between the calculated and experimentally measured diffusion coefficients are made, where good agreement is evident. In addition, the obtained mobility parameters can reproduce a reasonable concentration profile for the Nb/Zr diffusion couple annealed at 1868 K for 5400 s.     

概率引导的随机采样一致性算法

为了提高随机采样一致性算法的计算效率,提出一种概率引导的随机采样一致性算法.根据采样模型在原始数据上的检验结果调整每个样本点的采样概率,使得正确样本和正确模型被采样的概率得到提高.在首次获得正确模型之后,样本采样与模型更新构成了一个正反馈环节,经过若干次迭代后,正确样本被采样的概率远超过错误样本被采样的概率.理论分析和实验数据表明,该算法收敛需要的迭代次数较少,有效地提高了随机采样一致性算法的效率.     

基于ECoG的运动想象脑-机接口分类方法

脑—机接口BCI(Brain-Computer Interface)技术是近年来国际上的研究热点之一,它通常利用脑电EEG(electroencephalo-gram)来实现无动作的人机交互,运动想象是其中一种重要的BCI实验范式。有关研究表明,脑皮层电位ECoG(electrocorticogram)具有更好的信噪比与频带特性。研究基于ECoG的运动想象BCI系统,针对ECoG信号的特点,改进了信号处理方法,提取数据的公共空间模式CSP(Common Spatial Pattern)特征,并利用支持向量机SVM(Support Vector Machines)进行分类器设计,提高了运动意向的识别正确率。用相应方法处理2005年脑-机接口竞赛中的一组实验数据,正确率达到92%,相比于当时参赛时所用的方法提高了6%。实验还发现,支持向量机在克服"维数灾难"和"过拟合"方面具有更好的鲁棒性。     

RTLinux实时调度算法的改进与实现

为提高RTLinux的实时调度性能,分析了RTLinux的工作原理,针对其现有调度算法的不足,提出了改进的最小裕度优先算法,有效减少了颠簸现象,提高了算法性能.深入分析了RTLinux下ILLF调度器的实现,提高了CPU的使用率,增强了系统调度性能,并通过程序验证和调度器仿真,验证了算法的可行性和有效性.     

视频图像在三维模型中的渲染

视频监控是大型安防工作中最重要的一个环节,传统的视频监控系统展示给用户的只是独立的二维平面图像,图像脱离环境,整体性不足,为了解决该问题,提出了将视频图像渲染显示于三维模型的思路.研究了纹理映射技术并结合视频图像渲染的特殊性分析研究了Z缓冲算法、Shadow map算法,根据实际应用提出Extend Shadow map算法以实现将视频图像与三维场景无缝贴合.实验结果表明,视频图像渲染显示于三维模型中所体现的优越性.