Fe-substituted (La,Sr)TiO3 as potential electrodes for symmetrical fuel cells (SFCs)

In the work presented herein, the potential use of La₄Sr₈Ti_12−xFe_xO_38−δ (LSTF) materials as electrodes for a new concept of solid oxide fuel cells, symmetrical fuel cells (SFCs), is considered. Such fuel cells use simultaneously the same material as anode and cathode, which notably simplifies the assembly and further maintenance of the cells. Therefore, we search for materials showing high conductivity in a wide range of oxygen partial pressures in addition to certain degree of catalytic activity for the oxidation of the fuel and reduction of the oxidant, respectively. The preliminary electrochemical experiments performed reveal that the overall conductivity increases notably upon Fe substitution, being the main contribution electronic n-type. The fuel cell tests indicate that LSTF composites with YSZ and CeO₂ perform reasonably well under H₂ conditions, although the performance in methane is rather modest and require further optimisation.     

Optimization of semiochemical-based trapping ofMetamasius hemipterus sericeus (Olivier) (Coleoptera: Curculionidae)

Response of adults of the West Indian sugarcane weevil,Metamasius hemipterus sericeus, to various semiochemical treatments and physical trap designs was studied in southern Florida in field-grown banana and Canary Island date palms. Ethyl acetate released alone at 860–1007 mg/day was as effective for the capture ofM. h. sericeus as a combination of ethyl acetate (844–919 mg/day), ethyl propionate (348–362 mg/day), and ethyl butyrate (117–137 mg/day) and in one trial was more effective than fermenting sugarcane (250 g), ethyl propionate alone (353–384 mg/day), ethyl butyrate alone (123–174 mg/day), or no treatment. Ethyl acetate released alone at 675–683 mg/day was as attractive as 250 g of fermenting sugarcane or the racemic blend of the male-produced aggregation pheromones [(±)-5-methyl-nonan-4-ol and (±)-2-methyl-heptan-4-ol (8:1 ratio) “metalure”] at 3 mg/day. Weevil counts increased with binary combinations of ethyl acetate, sugarcane, and/or metalure over these treatments alone and the ternary combination was two to three times more effective than any of the binary treatments. Attraction to ethyl acetate released alone at 777 mg/day with metalure was greater than to the hydrolysis products of ethyl acetate (ethanol and/or acetic acid each released at about 6–8 mg/day) with metalure. Weevil counts from traps baited with 250 g of sugarcane and metalure increased with increasing dose of ethyl acetate to about 400 mg/day and then appeared to plateau. Ethyl acetate (about 700 mg/day) and metalure increased weevil counts in traps with increasing amounts of sugarcane (0–2 kg). Molasses (45 g) + water (158 ml) substitutes for sugarcane were about as effective for capturingM. h. sericeus as 250 g of fermenting sugarcane [all treatments with ethyl acetate (847 mg/day) and metalure]. Early experiments used a lethal pitfall trap. We demonstrated that several alternative trap designs were more effective than the lethal pitfall trap for capturing weevils. Color and height (on ground vs. 1 m on pole) did not affect trap efficacy when baited with the ternary combination of ethyl acetate (672–825 mg/day), sugarcane (250 g), and metalure.     

Laser welding of Al55-Zn coated steel sheet

A study has been made of the procedures used for the lap and butt welding of 0.62 and 1.16 mm thickness steel sheets coated with Al55-Zn alloy, using laser-beam technology. The main problems arise in lap welding as a result of zinc evaporation from the coating. The vapour pressures of this element lead to cratering and blistering of the welds which are visible from the external surface and imply severe weld defects. An efficient solution to this problem consists in leaving a gap between the internal faces, thus allowing the zinc vapours to escape. Excessive gaps, however, lead to the molten metal collapse and to lack of penetration. In the present work, acceptable results were obtained with a maximum interface separation of 0.1 mm. This allows excellent continuity of the joints, without cracks, pores or non-metallic inclusions and with moderate hardnesses, thus demonstrating the good laser weldability of the coated material. A difficulty arises, however, in relation to the coating in zones close to the weld. In these high-temperature zones the coating is lost, and in the immediately adjacent areas the coating microstructure and phases are altered, as was shown by scanning electron microscope analyses.     

Microstructural Modelling of Nb Microalloyed Steels during Thin Slab Direct Rolling Processing

The microstructural evolution during the hot rolling of coarse grain sized austenite has been modeled considering all the microstructural mechanisms (dynamic, static and metadynamic recrystallization, strain induced precipitation) that can take place during an industrial TSDR production of three Nb microalloyed steels. Based on the results obtained from the model, processing maps have been drawn for 0.02%, 0.035% and 0.05% Nb microalloyed steels. Optimum processing conditions to exploit all the benefits of the Nb microalloying have been defined considering a final gauge thickness range between 1.5 and 12.65 mm. In addition, and facing the difficulties present in the production of thick hot strip, several alternative thermomechanical schedules are proposed, which would originate microstructures with a suitable combination of homogeneity and retained strain prior to transformation.     

Optimization techniques for curved path computing

Participating media with an inhomogeneous index of refraction make light follow curved paths. Simulating this in a global illumination environment has usually been neglected due to the complexity of the calculations involved, sacrificing accurate physical simulations for efficient visual results. This paper aims to simulate non-linear media in a more reasonable time than previous works without losing physical correctness. Accuracy is achieved by solving the Eikonal equation of geometrical optics, which describes the path followed by a light beam that traverses a non-linear medium. This equation is used in the context of a photon mapping extension.     

Analysis of the effect of polypyrrole synthesis conditions on its capacity to reduce hexavalent chromium

This paper reports the capacity of polypyrrole to reduce toxic hexavalent chromium (Cr(VI)). The influence of using different electrolytes during the polymer's synthesis has been studied. To improve the reduction of Cr(VI), the parameters considered were the polypyrrole morphology and the amount of conducting polymer. Polypyrrole obtained by cyclic voltammetry at a low sweep rate using KBr as supporting electrolyte showed better performance for Cr(VI) reduction compared to coatings obtained by constant potential or cyclic voltammetry at high sweep rates.     

Abnormalities in plasma and red blood cell fatty acid profiles of patients with colorectal cancer

Intravenous injection of stearoyl vanillylamide (C18-VA), a nonpungent capsaicin (CAP) analog, enhances adrenaline secretion significantly and as effectively as CAP in rats. Because swimming capacity was enhanced by CAP in mice due to CAP-induced adrenal catecholamine secretion, we investigated the effects of oral administration of C18-VA on swimming capacity using an adjustable-current water pool. Male Std ddY 6-wk-old mice were fed a commercial diet for this study and one group was orally administered C18-VA via a stomach tube. Treated mice were able to swim longer before exhaustion than the control mice (62.9 +/- 5.6 vs. 49.6 +/- 7. 0 min, P < 0.05). The swimming capacity of two groups administered C18-VA (0.02 and 0.033 mmol/kg) was significantly greater than that of those administered vehicle alone, (P < 0.05). Substance P concentration in cerebrospinal fluid, which is involved in pain transmission and is the first direct measure of pungency, was not affected by C18-VA administration. In an experiment examining the effects of C18-VA on serum adrenaline concentration, adrenaline was significantly greater in C18-VA treated mice than in controls at 2-h post-dose (C18-VA group, 26.09 +/- 2.82; control group 13.29 +/- 0. 96 microg/L, P < 0.01). In a separate study free fatty acids in serum were elevated in treated mice at 2-h post-dose (P < 0.01). While serum glucose concentration was not affected. These results suggest that C18-VA increased swimming capacity of mice via adrenaline release, independent of pungency. In addition, the present study suggests the usefulness of its application to humans.