Recovering of forest biomass from Spanish hybrid poplar plantations

Residues recovering from traditional poplar plantations for timber production are a potential relevant biomass source in Spain and other temperate countries. Three different residual biomass harvesting systems have been work-studied in order to characterize the work methods and analyze their productivity and cost. Two were oriented to branches, top and/or energy wood collection, chipping and transport using different work methods, while the other one consisted of after-logging stumps removal and shredding. Different sized and powered chippers worked in the two first cases, besides different farm tractors with trailers for off-road chips transport. Also the trucks and the loading machines were different. In the third site, a backhoe excavator removed the stumps, and a bucket loader collected them to be grinded by a shredding machine. Productivity and cost have been analyzed using IUFRO standards, providing average figures and, when possible, predictive productivity equations. Most capital-intensive equipment option has shown to be most productive, but less investment requiring system is cheaper and may be most interesting for some enterprise and plantation sizes. In addition, logistics of biomass and timber supply has been analyzed, and some indications about equipment sizing, machine annual production and relocation costs related to supply area and average plantation size are provided.     

Tuning the Stability of Graphene Layers by Phthalocyanine‐Based oPPV Oligomers Towards Photo‐ and Redoxactive Materials

In contrast to pristine zinc phthalocyanine (1), zinc phthalocyanine based oPPV‐oligomers (2–4) of different chain lengths interact tightly and reversibly with graphite, affording stable and finely dispersed suspensions of mono‐ to few‐layer graphene—nanographene (NG)—that are photoactive. The p‐type character of the oPPV backbones and the increasing length of the oPPV backbones facilitate the overall π–π interactions with the graphene layers. In NG/2, NG/3, and NG/4 hybrids, strong electronic coupling between the individual components gives rise to charge transfer from the photoexcited zinc phthalocyanines to NG to form hundreds of picoseconds lived charge transfer states. The resulting features, namely photo‐ and redoxactivity, serve as incentives to construct and to test novel solar cells. Solar cells made out of NG/4 feature stable and repeatable photocurrent generation during several ‘on‐off’ cycles of illumination with monochromatic IPCE values of around 1%.     

Peracetic acid‐enhanced photocatalytic and sonophotocatalytic inactivation of E. coli in aqueous suspensions

BACKGROUND: Although chlorination is an effective and widely employed method of water disinfection, it suffers serious drawbacks such as the formation of toxic chlorinated by‐products. Therefore, other disinfection technologies have been researched and developed, including advanced oxidation. RESULTS: The efficacy of heterogeneous photocatalysis and sonophotocatalysis induced by UV‐A irradiation and low frequency (24–80 kHz) ultrasound irradiation in the presence of TiO₂ as the photocatalyst and peracetic acid (PAA) as an additional disinfectant to inactivate E. coli in sterile water was evaluated. PAA‐assisted UV‐A/TiO₂ photocatalysis generally leads to nearly complete E. coli inactivation in 10–20 min of contact time with the extent of inactivation depending on the photocatalyst type and loading (in the range 100–500 mg L^?1) and PAA concentration (in the range 0.5–2 mg L^?1). The simultaneous application of ultrasound and UV‐A irradiation in the presence of TiO₂ and PAA prompted further E. coli inactivation. CONCLUSIONS: The proposed advanced disinfection technology offers complete E. coli inactivation at short treatment times and low PAA doses. Copyright © 2010 Society of Chemical Industry     

Influence of Temperature on Thermodynamic Properties of Methyl <Emphasis Type="Italic">t</Emphasis>-Butyl Ether (MTBE) + Gasoline Additives

The densities and sound speeds of binary mixtures of methyl tert-butyl ether (MTBE) + (benzene, toluene, ethylbenzene, isooctane, tert-butyl alcohol) have been measured at temperatures from 288.15 to 323.15 K and at atmospheric pressure over the complete concentration range. The experimental excess volumes and deviations of isentropic compressibility were calculated. The deviation of isentropic compressibility data have been analyzed in terms of different theoretical models; adequate agreement between the experimental and predicted values is obtained. The data from this study improve the data situation related to gasoline additives and help to understand the MTBE volumetric and acoustic behavior for various chemical systems.     

COMBINED CONVECTIVE-MICROWAVE DRYING OF AGAR GELS: INFLUENCE OF MICROWAVE POWER ON DRYING KINETICS

The use of microwave energy in the drying of deformable material such as gel considerably reduces drying time and enables the control of retraction in the sample. A further advantage is that no hot spots are produced, allowing a dry product of superior quality to be obtained.The aim of this work has been to determine the kinetics of the convective-microwave drying process of agar gel plates. For this purpose, we developed a pilot closed loop, computer-controlled apparatus of convective-microwave drying, that enables the drying air conditions to be changed and the microwave power to be supplied over a wide value range. The equipment also records the sample surface temperature by means of an infrared thermometer. The drying curves obtained for plane geometry present four different drying phases: an initial phase where a rapid increase in the drying rate and in the surface temperature can be observed, as well as a constant rate phase that ends in the so-called convective critical moisture content, a first falling rate phase that concludes in the microwave critical moisture point, and finally a second falling rate phase. Combined convective-microwave drying enables a considerable reduction in drying time compared to convective drying, the time required being inversely proportional to the microwave power supplied. The empirical equation that best represents the kinetics is of the Page type. The absorbed volumetric power in terms of the moisture content was experimentally estimated, with the experimental data fitting an empirical equation.     

标准与市场

“曾经，专业市场为中国纺织服装行业的发展出了大力气。但是现在．专业市场越来越多．重复建设、不正当竞争等问题却也屡见不鲜。专业市场的量上来了，质却还停滞不前。大多数专业市场的影响力只限于很小的一个地理范围，能在全国范围内产生影响的专业市场少之又少。如此的小打小闹．一方面无法支撑专业市场的发展，另方面使得业内外及消费者对专业市场的偏见越来越深。很多人认为，专业市场就是卖低档货的地方，其实不然。真正的专业市场，是为有实力的企业、包括品牌企业的流通和形象宣传服务的，为生产企业与商贸。DIL通企业的沟通和交易提供场所。所以．规范专业市场的问题就显得很迫切。”采访中．中国纺织品商业协会彭桂福会长的焦急之情溢于言表。     

Effect of the Chord-Brace Angle on the Strength of Rectangular Hollow Sections K- and N-Joints in Galvanized Structures

An important consideration when using hot-dip galvanized tubular structures is the uncertainty of the joint behaviour due to the possible reduction in the global joint resistance produced by the vent holes required for the galvanizing process. This paper assesses the effect on the joint strength of the angle between the brace members and the chord in a K- or N-joints made with rectangular hollow sections. The study is focused on the case when those brace members include characteristic holes required for the hot-dip galvanizing process. To accomplish the objective of the proposed work, some tests on full-scale K- and N-joints, including angles of 35°, 45°, 55° and 90°, were carried out. The experimental work was complemented by a validated numerical simulation in order to give some design recommendations and to extend the research to other joint configurations.     

Ultrafine 316 L stainless steel particles with frozen-in magnetic structures characterized by means of electron backscattered diffraction

Electron Backscatter Diffraction (EBSD) studies clearly revealed a different crystallographic structure of the smallest particle size fraction of gas-atomized AISI 316 L stainless steel powder (< 4 μm) compared with larger sized fractions of the same powder (< 45 μm). Despite similar chemical compositions, the predominating structure of the smallest particle size fraction was ferritic (i.e., has ferromagnetic properties) whereas the larger sized particle fractions and massive 316 L revealed an expected austenitic and non-magnetic structure. From these findings, it follows that direct magnetic separation can be applied to separate very fine sized particles. These structural differences explain previously observed dissimilarities from corrosion and metal release perspectives.     

Chemical composition, mineral content and antioxidant activity of Verbena officinalis L.

Aqueous and hydroalcoholic extracts from Verbena officinalis L. were obtained and characterised. The analysis by HPLC-DAD and LC-MS allowed the detection and identification of three iridoids, fifteen flavonoids and four phenolic acid derivatives. Four flavonoids, scutellarein 7-diglucuronide (9), scutellarein 7-glucuronide (13), pedalitin 6-galactoside (15) and scutellarein 7-glucoside (19) are reported for the first time from this plant. In addition, three new flavonoids have been isolated: scutellarein 7-O-(2-O-feruloyl)-diglucuronide (5), pedalitin 6-O-diglucuronide (6) and pedalitin 6-O-(2-O-feruloyl)-diglucuronide (13). To our knowledge, these flavonoids have not been reported as natural products. Both extracts showed significant antioxidant activity using three in vitro model systems and the results have been correlated with total phenolic and total flavonoid contents. The results have allowed establishing an important relation structure-activity and significant correlations have also been found between the mineral content and the flavonoids present in both extracts.     

An experimental investigation of the combustion of technical tetrachlorobenzene in a laboratory scale incinerator

An experimental study of the combustion of technical 1,2,3,4-tetrachlorobenzene has been carried out in conditions closely similar to those in incinerators of industrial hazardous wastes. A non-premixed flame fed by a fuel spray was stabilized in a reactor heated electrically. Measurements of axial and radial temperatures and species concentration profiles in well-defined conditions have been systematically repeated to specify the influence exerted by key parameters on the efficiency of the thermal degradation process. The reactor’s wall temperature was varied from 1223 to 1363 K. Air injection was distributed between axial and peripheral injectors to change the swirl intensity. Two fuel injectors have been compared to assess the influence of atomization efficiency. A methane-air pilot flame helped to anchor the flame and to decrease the overall Cl/H ratio. The latter was also decreased by addition of water vapor. Results show that conditions leading to a complete consumption of the fuel can be associated with very limited carbon conversion into CO₂ and chlorine conversion into HCl.