Improvement of carrier diffusion length in silicon nanowire arrays using atomic layer deposition

To achieve a high-efficiency silicon nanowire (SiNW) solar cell, surface passivation technique is very important because a SiNW array has a large surface area. We successfully prepared by atomic layer deposition (ALD) high-quality aluminum oxide (Al₂O₃) film for passivation on the whole surface of the SiNW arrays. The minority carrier lifetime of the Al₂O₃-depositedSiNW arrays with bulk silicon substrate was improved to 27 μs at the optimum annealing condition. To remove the effect of bulk silicon, the effective diffusion length of minority carriers in the SiNW array was estimated by simple equations and a device simulator. As a result, it was revealed that the effective diffusion length in the SiNW arrays increased from 3.25 to 13.5 μm by depositing Al₂O₃ and post-annealing at 400°C. This improvement of the diffusion length is very important for application to solar cells, and Al₂O₃ deposited by ALD is a promising passivation material for a structure with high aspect ratio such as SiNW arrays.     

X-ray absorption fine structure combined with fluorescence spectrometry for monitoring trace amounts of lead adsorption in the environmental conditions

The local structure of trace amounts of lead in an adsorbent matrix that contains a high concentration of iron and magnesium (Mg6Fe2(OH)16(CO3) x 3H2O) was successfully monitored by means of X-ray absorption fine structure spectroscopy combined with fluorescence spectrometry. A eutectic mixture of PbCO3 and Pb(OH)2 coagulated when Pb2+ was adsorbed from a 1.0 ppm aqueous solution, and in contrast, the major species was ion-exchanged Pb2+ in the case of adsorption from a 100 ppb aqueous solution. The difference was ascribed to the balance between the precipitation equilibrium for coagulation and the rate of the ion exchange reaction with surface hydroxyl groups.     

Alkaline hydrolysis of alkylated acidic groups on carbon black

Potentiometric pH-stat titration was performed on alkylated carbon black dispersed in aqueous solution at pH 9.0, 10.0 and 11.0 and alkaline hydrolysis rate constant of the alkylated functional groups on the carbon black was obtained therefrom. Carbon black treated with C₁-C₈n-alcohols in vapor or liquid phase was used in this experiment. Hydrolysis proceeded more rapidly for carbon black treated with lower alcohols. For each alkylated carbon black, the hydrolysis rate constant decreased with time and, after the hydrolysis rate diminished, a hydrolysis resistant fraction of alkylated groups remained. For example, the hydrolysis rate constants at 25°C were 24.33, 17.50 and 4.501 · mol^?1 · sec^?1 at 15 min and 6.00, 6.00 and 3.671 · mol^?1 · sec^?1 at 45 min after the start of hydrolysis at pH 9.0 for carbon black treated with C₂, C₃ and C₄ alcohols respectively.     

Medical management after pituitary surgery

Although the majority of patients with pituitary tumor, undergoing transsphenoidal microsurgery, have a low incidence of hormonal deficiency after surgery, the endocrinological evaluations should be carefully done before and after surgery. Glucocorticoid replacement is necessary in patients with Cushing's disease during and after surgery as well as those with adrenal insufficiency. Repeated CRF test is useful to assess the secondary adrenal insufficiency of Cushing's disease after surgery. Patients with impaired secretion of both ACTH and TSH should receive glucocorticoid replacement before thyroid hormone replacement in order to avoid adrenal crisis. A combination of CRF, GRF, TRH and GnRH is a safer and more reliable test to evaluate pituitary function than the conventional triple test consisting of insulin, TRH and GnRH, especially in patients predicted to have pituitary-adrenal insufficiency. Diabetes insipidus(DI), immediately after pituitary surgery, should be treated with subcutaneous injection of Pitressin. Even if patients seem to have recovered from DI several days after surgery, they must be monitored closely because of the incidence of triphasic DI. Less attention has been given to replacement for GH deficiency in adults. Recent reports revealed that GH replacement in adults with GH deficiency decreases visceral fat tissue and increases plasma calcium, phosphorus, osteocalcin and procollagen III levels. GH replacement will become more popular even in adults. Many options and technological advantages in the diagnosis and treatment of pituitary tumors have developed in a decade. In the near future, post-operative patients with pituitary tumors must be cared for in view of the "quality of life".     

Phase behavior of N‐isopropylacrylamide/acrylic acid copolymer hydrogels prepared with ultrasound

N‐Isopropylacrylamide/acrylic acid copolymer hydrogels were synthesized with ultrasound. The thermoresponsive phase behaviors of gels synthesized with ultrasound (US gels) were investigated and compared with those of gels synthesized in the absence of ultrasound (FR gels). The US gels showed thermoresponsive swelling behavior with a large hysteresis over a wide range of temperatures around its phase‐transition temperature. The hysteresis became larger with an increasing copolymerized acrylic acid content. The US gels were also characterized from the viewpoint of chemical, hydration, and macroscopic physical structures. Little difference was observed in the chemical and hydration structures of the FR gels and US gels. The macroscopic physical structure of the US gels was, however, distinct from that of the FR gels. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2449–2452, 2003     

Process Intensification of Living Cationic Polymerization of Isobutylene by a Flow Reaction System

Increasing the reaction temperature of the living cationic polymerization of isobutylene is crucial for industrial production due to the cost of refrigeration. The reaction temperature increase was achieved with an accelerated reaction rate using a flow reaction system. The polymerization conditions, including the flow reactor design, were based on the results of kinetic studies. Utilizing a milli‐scale flow reactor, polyisobutylene, which has a narrow molecular weight distribution, was obtained within a considerably short residence time at a high temperature. Furthermore, it was confirmed that the value of M_w/M_n correlates with the product of the Reynolds number and the angle of collision.     

Corrosion behaviour of Al/Al3Ti and Al/Al3Zr functionally graded materials produced by centrifugal solid-particle method: Influence of the intermetallics volume fraction

Intermetallic particles, Al₃Ti and Al₃Zr were formed in Al–5mass%Ti and Al–5mass%Zr alloys, respectively, by centrifugal casting, in order to create functionally graded materials (FGMs). At present, no information is available on the influence of the amount of intermetallics on the electrochemical properties of these alloys.In this paper, the corrosion resistance of Al/Al₃Ti and Al/Al₃Zr FGMs was investigated by open-circuit measurements, potentiodynamic polarization and electrochemical impedance spectroscopy. Results suggests that the corrosion resistance of the FGMs is affected by galvanic effects between the intermetallic particles and the metallic matrix. Lower centrifugal forces resulted in an improvement of the electrochemical properties.     

The strength properties of iron aluminides

For the development of Fe−Al alloys as structural materials, a deep understanding of slip and deformation properties is necessary. In particular, since mechanical properties of the iron aluminides are affected by excess vacancy strengthening as well as the positive-temperature dependence of yield stress, controlling these strength features is essential. In this article, the strength properties of iron aluminides are reviewed. Author’s Note: All compositions are provided in mole percent. Kyosuke Yoshimi earned his Ph.D. in materials science and engineering at Tohoku University in 1997. He is currently a research associate at Tohoku University. Shuji Hanada earned his Ph.D. in materials science and engineering at Tohoku University. He is currently a professor at Tohoku University. Dr. Hanada is also a member of TMS.