Fir laser emissions from population inversion transition by TEA-CO2 laser pumping

In this paper, the numerical analysis is given which is applicable for a TEA-CO₂ laser pumping in search of effective pumping method. The analysis also can estimate the optimum pressure for a given molecule and a given pulse laser. Also we report in this work many FIR laser emissions from population inversion transition which have never observed before using a TEA-CO₂ laser.     

Photoluminescence Analysis of Iron Contamination Effect in Multicrystalline Silicon Wafers for Solar Cells

We investigated the effect of Fe contamination on the electronic properties of dislocation clusters in relation to oxygen precipitation in multicrystalline silicon (mc-Si). Photoluminescence (PL) spectroscopy and mapping were performed at room and liquid-He temperatures on mc-Si wafers before and after Fe contamination. PL spectra consisted of the band-edge emission, the 0.78-eV emission associated with oxygen precipitates, and the dislocation-related D-lines. The Fe contamination increased the electrically active dislocation clusters. Part of these clusters acted as preferential oxygen precipitation sites, and their electronic properties were not further influenced by the Fe contamination.     

Thermal performance of a packed bed reactor for a high‐temperature chemical heat pump

The thermal performance of a chemical heat pump that uses the reaction system of calcium oxide/lead oxide/carbon dioxide, which is developed for utilization of high‐temperature heat above 800°C, is studied experimentally. The thermal performance of a packed‐bed reactor of a calcium oxide/carbon dioxide reaction system, which stores and transforms a high‐temperature heat source in the heat pump operation, is examined under various heat pump operation conditions. The energy analysis based on the experiment shows that it is possible to utilize high‐temperature heat with this heat pump. This heat pump can store heat above 850°C and then transform it into a heat above 900°C under an approximate atmospheric pressure. An applied system that combines the heat pump and a high‐temperature process is proposed for high‐efficiency heat utilization. The scale of the heat pump in the combined system is estimated from the experimental results. Copyright © 2001 John Wiley & Sons, Ltd.     

Enhancement of thermostability of kojibiose phosphorylase from Thermoanaerobacter brockii ATCC35047 by random mutagenesis

Random mutation by error-prone PCR was introduced into kojibiose phosphorylase from Thermoanaerobacter brockii ATCC35047. One thermostable mutant enzyme, D513N, was isolated. The D513N mutant enzyme showed an optimum temperature of 67.5-70 degrees C (the wild type, 65 degrees C), and thermostability up to 67.5 degrees C (the wild type, up to 60 degrees C). The half-lives of D513N were estimated to be 135 h at 60 degrees C, 110 min at 70 degrees C and 6 min at 75 degrees C, respectively. They were about 1.6-fold, 7-fold and 6-fold longer than those of the wild-type enzyme, respectively.     

Arsenic behavior in paddy fields during the cycle of flooded and non-flooded periods

The behavior of As in paddy fields is of great interest considering high As contents of groundwater in several Asian countries where rice is the main staple. We determined the concentrations of Fe, Mn, and As in soil, soil water, and groundwater samples collected at different depths down to 2 m in an experimental paddy field in Japan during the cycle of flooded and non-flooded periods. In addition, we measured the oxidation states of Fe, Mn, and As in situ in soil samples using X-ray absorption near-edge structure (XANES) and conducted sequential extraction of the soil samples. The results show that Fe (hydr)oxide hosts As in soil. Arsenic in irrigation waters is incorporated in Fe (hydr)oxide in soil during the non-flooded period, and the As is quickly released from soil to water during the flooded period because of reductive dissolution of the Fe (hydr)oxide phase and reduction of As from As(V) to As(III). The enhancement of As dissolution by the reduction of As is supported by high As/Fe ratios of soil water during the flooded period and our laboratory experiments where As(III) concentrations and As(III)/As(V) ratios in submerged soil were monitored. Our work, primarily based on data from an actual paddy field, suggests that rice plants are enriched in As because the rice grows in flooded paddy fields when mobile As(III) is released to soil water.     

Multiresidue method for pesticides and veterinary drugs in bovine milk using GC/MS and LC/MS/MS

A simple, sensitive and selective method with gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/tandem mass spectrometry (LC/MS/MS) has been developed to detect 342 pesticides and veterinary drugs contaminating bovine milk at the maximum residue limits (MRLs) defined in the "positive list system". Sample preparation was performed by extracting the analytes with acetonitrile, followed by salting-out with sodium chloride. For some pesticides, the extract was further cleaned up by n-hexane partitioning and PSA cartridge column chromatography. GC/MS-EI or -NCI was used to determine pesticide residues, while LC/MS/MS-ESI was applicable to the determination of pesticide and veterinary drug residues. The variation of the recoveries of these drugs at MRL was relatively wide; however the relative standard deviations of the recovery of each drug were within 28%, suggesting that the present method is good enough for use as a screening test for contaminants at the MRLs. These results show that this method is useful for multiresidue analysis of numerous pesticides and veterinary drugs in bovine milk.     

Introduction of sulfhydryl groups and disulfide linkage to mungbean 8Sα globulin and effects on physicochemical and functional properties

Sulfhydryl groups and disulfide bond were introduced in mungbean's major storage protein, 8Sα globulin, by protein engineering to improve structural stability and functional properties. Five modified proteins or mutants (F59C, I99C, A213C, one free sulfhydryl group; I99C/A213, one disulfide bridge; F59C/I99C/A213C, one free sulfhydryl group and one disulfide linkage) were expressed in Escherichia coli at a yield similar to that of the unmodified protein or wild type (WT) in soluble form (38%). The number of introduced groups in the mutants was confirmed by Ellman analysis. Mutant and WT proteins exhibited similar elution patterns on gel filtration indicating their trimeric native conformation. Mutants had 2 to 3.8 °C higher T_m values than WT and were digested by chymotrypsin at 52–58% in 60 min but exhibited different digestion patterns. All mutants showed greater hardness of heat-induced gels than WT, especially I99C/A213C and F59C/I99C/A213C. Results indicate the improved structural stability of the modified 8Sα globulin.     

Combustion Characteristics of High Burn Rate Azide Polymer Propellant

The combustion characteristics of high burn rate azide polymer composite propellant were examined by using a chimney type strand burner, a Ø 80 mm × 140 mm small rocket motor and a L/D = 16 of Ø 70 mm heavy-wall rocket motor. The propellant, BAMO/NMMO copolymer was used as a fuel binder and AP as an oxidizer, burned approximately 29 mm/s at a pressure range of 7 MPa to 20 MPa with a plateau-mesa burning behavior. However, the pressure exponent rapidly increased at above the pressure of 20 MPa and was 0.52 between 20 MPa and 25 MPa. The low pressure exponent and high burn rate of the azide polymer propellant are suitable to the short burn time at the maximum expected operating pressure range of 15 MPa to 20 MPa. The high L/D heavywall rocket motor with volumeric mass fraction of 83% showed stable combustion without any pressure oscillation and severe erosive burning. The average burn rate in the high L/D motor was 10% larger than that estimated from the strand data. The theoretically calculated pressure-vs-time and thrust-vs-time curves were well consistent with the measured data. α = 20 and β = 180 for the Lenoir-Robillard equation were used to estimate the burn rate.     

Mechanism of Catalytic Effects on AMMO/HMX Composite Propellants Combustion Rates

Thermal decomposition and the burning properties of AMMO/HMX propellants have been investigated. The heat generated by the AMMO decomposition initiated and accelerated the thermal decomposition of HMX, and the reaction between decomposed AMMO and HMX depended upon the heating rate. The rate determining step of the reaction path was different in higher and lower heating rate conditions. 2,2-bis(ethylferrocenyl)propane (CFe) and copper chromite (CuC) significantly altered the mechanisms of the thermal decomposition and the burning properties. CFe showed an increase in burning rate with a slight increase in burning rate exponent. However, CuC yielded high values for the burning rate exponent. The combined additive yielded the highest burning rate with the lowest burning rate exponent. The influence of CuC on the burning rate exponent disappeared by the combination with CFe. Though CFe and the combination additive improved the ignitability of the propellants, the propellant with CuC was difficult to ignite because of the relatively small quantity of heat feedback and/or heat released by the decomposition.