“Click Peptide“: pH‐Triggered in Situ Production and Aggregation of Monomer Aβ1–42

Into neutral : We demonstrate the unique features of a pH click peptide based on an O‐acyl isopeptide method. Under acidic conditions, the click peptide remains in a monomeric form. Upon increase of the pH to 7.4, the click peptide is quickly able to convert into Aβ1–42 through an O‐to‐N intramolecular acyl migration. Further study using this pH click peptide would elucidate the pathological role of Aβ1–42 in Alzheimer's disease.

     

Miscibility and Physical Properties of Poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate)/Poly(ethylene oxide) Binary Blends

In order to improve some inferior physical properties of bacterial poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(3HB‐co‐3HHx)] by blending with PEO, the miscibility, spherulite morphology, crystallization behavior and mechanical properties of P(3HB‐co‐3HHx)/PEO binary biodegradable polymer blends were investigated. A good miscibility between P(3HB‐co‐3HHx) with a 3HHx unit content of 11 mol‐% and PEO in the amorphous state was found when the PEO weight fraction was 10 wt.‐%, while the miscibility decreased dramatically when the PEO weight fraction exceeded 20 wt.‐%. Strongly depending on the blend composition, the mechanical properties of P(3HB‐co‐3HHx) was found to be significantly improved by blending with PEO with a weight fraction of ≈5–17.5 wt.‐%.

     

Formation mechanism for hexagonal-structured self-assemblies of nanocrystalline titania templated by cetyltrimethylammonium bromide

Hexagonal-structured self-assemblies of nanocrystalline (anatase) titania templated by cetyltrimethylammonium bromide (C(16)H(33)N(CH(3))(3)Br; CTAB) (Hex-ncTiO(2)/CTAB Nanoskeleton) were formed after mixing of aqueous solutions containing CTAB spherical micelles and titanium oxysulfate acid hydrate (TiOSO(4).xH(2)SO(4).xH(2)O) as a titania precursor in the absence of any other additives. Formation mechanism of the Hex-ncTiO(2)/CTAB Nanoskeleton was examined in terms of the reaction temperature, titania precursor/CTAB mixing ratio, surfactant type, electrostatic interaction, micelle formation and molecular component. We found that crystal growth of crystalline (anatase) titania (polymorphic crystallization) was promoted with higher temperature and lower titania precursor content in aqueous solutions. In addition, we revealed that the crystalline (anatase) titania was formed in polycation, poly(allylamine hydrochloride ([CH(2)CH(CH(2)NH(2))HCl](n); PAH), and formamide (HCONH(2)) solutions. On the other hand, no titania formation was observed in anionic systems such as sodium dodecyl sulfate (CH(3)(CH(2))(11)OSO(3)Na; SDS) and poly(sodium 4-styrenesulfonate ([C(8)H(7)SO(3)Na](n); PSSS). This indicates that hydrolysis reaction of the titania precursor is initiated by not only cations but also nitrogen atoms in molecules and polymers. Hexagonally structure was formed in only cationic surfactant micellar solutions but not in polycation solutions and formamide.     

Synthesis and characterization of fullerene grafted poly(ε‐caprolactone)

The fullerene grafted poly(ε‐caprolactone) (PCL) was successfully synthesized with a graft efficiency of 80%. The fullerene moieties grafted onto the PCL chain aggregate into 1–2 μm particles so that a physical pseudo‐network is formed. Because of the existence of the network structure, the fullerene grafted PCL film can retain its shape at much higher temperatures than that of pure PCL film, as observed in dynamic mechanical tests. It shows a hydrophobic gelling behavior in chloroform solution. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermal and mechanical properties of a poly(ϵ‐caprolactone)/graphite oxide composite

The effect of graphite oxide (GO) as the enforcing filler on the properties of poly(?‐caprolactone) (PCL) was investigated in this study. Through the introduction of GO, the Young's modulus of PCL was increased from 340 to 1000 MPa, and the tensile strength of PCL was increased from 15 to 26 MPa. Furthermore, the interlayer distance of GO (0.6 nm) was found to expand to 1.1 nm in the PCL/GO composite, which indicated the intercalation of the PCL chain into the GO layers. Because of this intercalation structure of the PCL/GO composite, GO showed a higher reinforcing effect than graphite on the mechanical properties of PCL. The intercalation should have enabled much effective load transfer in the PCL/GO composites. Moreover, GO showed a nucleating effect toward the crystallization of PCL, as the nonisothermal crystallization peak temperature shifted from 25°C for pure PCL to about 34°C for the PCL/GO composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Oxidation of green rust suspensions containing different chromium ion species

The oxidation of hydrosulphate green rust (GR2(SO₄²⁻)) suspension containing different chromium ion species was investigated by X-ray diffraction, X-ray absorption spectroscopy and transmission electron microscopy. The pH, oxidation-reduction potential and amount of dissolved oxygen in aqueous solutions were measured during the reactions. The results show that the addition of Cr(III)₂(SO₄)₃ solution suppresses the transformation of GR2(SO₄²⁻) into iron oxyhydroxides and oxides in aqueous solution, while the addition of Na₂Cr(VI)O₄ solution promotes the transformation of GR2(SO₄²⁻) in which Cr(VI) is reduced to Cr(III); α-FeOOH particles were refined by the addition of the chromium ions.     

Effect of Polymer Dispersant Structure on Electrosteric Interaction and Dense Alumina Suspension Behavior

The present paper reports on research on the effect of molecular structure of polymer dispersants on the relationship between the electrosteric interaction of dispersants on solid surfaces and the viscosity of suspensions. Ammonium polyacrylate with different hydrophilic to hydrophobic ratios ( m:n ) was prepared and added to dense Al₂O₃ suspensions (40 vol%). The steric interactions and adsorbed structures of dispersants on Al₂O₃ powders were examined under an atomic force microscope (AFM). An optimum hydrophilic to hydrophobic group ratio, which was obtained from the maximum repulsive force and the minimum viscosity of suspension, was determined at m :n = 3:7. The changing mechanism of the adsorbed structure and the steric interaction of dispersants and the suspension viscosity by the hydrophilic to hydrophobic molecular ratio were discussed by comparing the experimental force curve and DLVO theory.     

Growth of β-Ga2O3 nanocolumns crossing perpendicularly each other on MgO (1 0 0) surface

β-Ga₂O₃ nanocolumns straightened and crossed perpendicularly each other were deposited on MgO (1 0 0) substrate by vapor phase transport method. Growth of the nanocolumns was examined at steps of 1000, 1050, and 1200 °C in elevation of source-boat temperature. We have drawn out the substrate from deposition-tube at each source-boat temperatures of 1000, 1050, and 1200 °C. Scanning electron microscopy of the sample with source-boat temperature of 1200 °C demonstrated that the straightened and elongated nanocolumns are crossing perpendicularly each other. Typical lengths of the nanocolumns were in the range of several hundreds nanometers below 1050 °C, and those of 1200 °C were in the range of ten to fifteen hundreds nanometers. Diameters of the nanocolumns stayed in the range of few hundreds nanometers, notwithstanding variation of the source temperature. X-ray diffraction and transmission electron microscopy with energy dispersive X-ray spectroscopy revealed that the nanocolumns are monoclinic β-Ga₂O₃ crystal, and the (4 0 0) plane of β-Ga₂O₃ nanocolumns is parallel to the (1 0 0) plane of MgO substrate.     

Enhanced activity and stability of Pt/C fuel cell anodes by the modification with ruthenium-oxide nanosheets

Ruthenium-oxide nanosheet (RuO₂ns) crystallites with thickness less than 1 nm were prepared via chemical exfoliation of a layered potassium ruthenate and deposited onto carbon supported platinum (Pt/C) as a potential co-catalyst for fuel cell anode catalysts. The electrocatalytic activity towards carbon monoxide and methanol oxidation was studied at various temperatures for different RuO₂ns loadings. An increase in electrocatalytic activity was evidenced at temperatures above 40 °C, while little enhancement in activity was observed at room temperature. The RuO₂ns modified Pt/C catalyst with composition of RuO₂:Pt = 0.5:1 (molar ratio) exhibited the highest methanol oxidation activity. CO-stripping voltammetry revealed that RuO₂ns promotes oxidation of adsorbed CO on Pt. In addition to the enhanced initial activity, the RuO₂ns modified Pt/C catalyst exhibited improved stability compared to pristine Pt/C against consecutive potential cycling tests.