采用TAB快速测定EMD性能

TAB(聚四氟乙烯乙炔黑)是好的导电和粘结合二为一的材料,采用该材料能快速评定EMD的性能。     

Reductive decomposition of nitrate ion to nitrogen in water on a unique hollandite photocatalyst

Photocatalysis of a hollandite compound K_xGa_xSn_8−xO₁₆ (x = ca. 1.8) was examined for the reduction of nitrate ion with a reducing agent of methanol in water under UV irradiation. Hollandites have a characteristic one-dimensional tunnel structure. The hollandite powder, which was prepared by the sol–gel method and unloaded with any additives like metals, was used as the photocatalyst and its photocatalytic reaction was analyzed quantitatively by using ion chromatography and on-line mass spectrometry, and its reaction mechanism was analyzed by in-situ FT-IR. The hollandite photocatalyst showed a significant activity for the formation of N₂ from NO₃⁻. The nitrate was reduced to N₂ and NO₂⁻, while the reducing agent methanol was partly oxidized to change to formic acid. The conversion of NO₃⁻was proportional to the yields of N₂, NO₂⁻, and HCOO⁻. The present photocatalyzed decomposition of NO₃⁻ to N₂ would be a useful photocatalysis for the environmental protection of water.     

Conversion of vegetable oil to biodiesel using immobilized Candida antarctica lipase

Biodiesel derived from vegetable oils has drawn considerable attention with increasing environmental consciousness. We attempted continuous methanolysis of vegetable oil by an enzymatic process. Immobilized Candida antarctica lipase was found to be the most effective for the methanolysis among lipases tested. The enzyme was inactivated by shaking in a mixture containing more than 1.5 molar equivalents of methanol against the oil. To fully convert the oil to its corresponding methyl esters, at least 3 molar equivalents of methanol are needed. Thus, the reaction was conducted by adding methanol stepwise to avoid lipase inactivation. The first step of the reaction was conducted at 30°C for 10 h in a mixture of oil/methanol (1:1, mol/mol) and 4% immobilized lipase with shaking at 130 oscillations/min. After more than 95% methanol was consumed in ester formation, a second molar equivalent of methanol was added and the reaction continued for 14 h. The third molar equivalent of methanol was finally added and the reaction continued for 24 h (total reaction time, 48 h). This three-step process converted 98.4% of the oil to its corresponding methyl esters. To investigate the stability of the lipase, the three-step methanolysis process was repeated by transferring the immobilized lipase to a fresh substrate mixture. As a result, more than 95% of the ester conversion was maintained even after 50 cycles of the reaction (100 d).     

Towards creating reversible silicon-based composite anodes for lithium ion batteries

A new inexpensive method aimed at distinguishing the forms in which Li⁺ remains irreversibly trapped within composite silicon-based anodes was suggested and tested. It includes a life-cycle test at a fixed degree of lithiation during the initial cycles. The integral capacity values obtained from the test were then correlated with the various chemical species of Li⁺ present in the electrodes after various cycle numbers in both charged and discharged states. Such a technique may provide a quantitative analytical tool for developing this type of electrode.     

New strategy for enhancement of microbial viability in simulated gastric conditions based on display of starch-binding domain on cell surface

The C-terminal region of the peptidoglycan hydrolase (CPH) of Lactococcus lactis IL1403 fused to the linker region and the starch-binding domain (SBD) of the *-amylase of Streptococcus bovis 148 was produced intracellularly in Escherichia coli. The fusion protein (CPH-SBD) was able to bind to the cell surface of Lactobacillus casei NRRL B-441 and to corn starch. Therefore, adhesion of cells to corn starch was mediated by the fusion protein. At a cell density of 10(9) cfu/ml and a starch concentration of 5 mg/ml, CPH-SBD-displaying L. casei cells aggregated with corn starch, whereas the free cells of L. casei did not form any aggregates with corn starch. After incubation in simulated gastric juice (pH 3.0, 1 h), the survival percentages of free cells, amylose-coated free cells, and free cells mixed with corn starch were 0.074%, 7.2%, and 3.1% respectively. When CPH-SBD-displaying bacteria aggregated with corn starch, their survival percentage was 8% higher than that of free cells mixed with corn starch. The survival of the amylose-coated CPH-SBD-displaying L. casei cells was comparable to that of amylose-coated free cells, whereas the survival percentage of amylose-coated aggregates of CPH-SBD-displaying bacteria with corn starch was 28% higher than that of amylose-coated mixture of free cells with corn starch. These results demonstrate the potential usefulness of the cell-surface display technique for enhancement of the delivery of viable microorganisms to the intestinal tract.     

High‐Yield Preparation,Versatile Structural Modification,and Properties of Layered Cobalt Hydroxide Nanocones

A low‐cost oil bath synthetic route is presented to produce uniform and highly crystalline layered cobalt hydroxide nanocones (NCs) intercalated with dodecyl sulfate anions (C₁₂H₂₅OSO₃^?, DS^?). A new exfoliating procedure, by gradually unravelling/unzipping these NCs through heat treatment in formamide‐water binary solution, is developed to prepare unilamellar nanosheets. Moreover, the NCs can be readily modified with various inorganic or organic anions via a conventional anion‐exchange process at ambient temperature. The exchanged product, for example, NO₃^?–intercalated NCs, can be more easily and rapidly transformed into cobalt oxides (e.g., Co₃O₄ and CoO) than the original DS^?–intercalated form while retaining a conical feature. Both the cobalt hydroxide NCs and exfoliated nanosheets are electrochemically redoxable, exhibiting a Faradaic pseudocapacitive behavior. The magnetic measurements further reveal both antiferromagnetic behaviors for transformed Co₃O₄ and CoO NCs. Their Néel temperature values are lower than those of bulk oxides due to finite size and geometric confinement effect. The peculiar conical feature of NCs with a hollow interior and tunable layer spacing, as well as exfoliated unilamellar nanosheets with all surface area exposed, may show promise for potential applications in electrochemical energy storage and magnetic devices.     

The effect of thiophene sequence separation on air-stable organic thin-film transistor materials

The relationship between thiophene sequences and organic thin-film transistor (OTFT) characteristics was studied to determine their effect on ionization potential, molecular orientation, and air stability. Two types of molecular structures were used: continuous sequence and divided sequence thiophenes. The length of thiophene sequence did not affect FET characteristics but did affect ionic potential and air stability. Furthermore, materials with divided thiophene sequences showed no change in OTFT characteristics when exposed to air. These results suggest that separation of thiophene sequences can improve air stability, which is a problem of thiophene-based materials.     

Compact Tunable Narrowband Terahertz-Wave Source Based on Difference Frequency Generation Pumped by Dual Fiber Lasers in MgO:LiNbO<Subscript>3</Subscript>

We demonstrate a high-average-power, single longitudinal-mode, and tunable terahertz (THz)-wave source based on difference frequency generation (DFG) in a MgO:LiNbO₃ (MgO:LN) crystal. The waves for DFG are generated using a pair of Yb-doped pulsed fiber lasers with a master oscillator power fiber amplifier configuration. The average power of the THz-wave output reaches 450 μW at 1.07 THz (280 μm) at a linewidth of 7.2 GHz, and the tunability ranges from 0.35 to 1.07 THz under the pulse repetition frequency of 500 kHz. A short burn-in test of the THz wave is also carried out, and the output power stability is within ± 5% of the averaged power without any active stabilizing technique. The combination of MgO:LN-DFG and stable and robust fiber laser sources is highly promising for the development of high-average-power THz-wave sources, particularly in the high transmission sub-THz region. This approach may enable new applications of THz-wave spectroscopy in imaging and remote sensing.