Performance of TZCD-MBOK watermarking scheme in T-DMB systems

Recently, watermarking based data transmission techniques using terrestrial digital TV signal have been proposed since they are also cost-free and can overcome the limitations of GPS. However, in the previous watermarking based methods, the detection accuracy is low and additional data rate is too low. Thus, we propose the throughput enhancement method by employing the TZCD-MBOK watermarking technique in T-DMB system. By applying the proposed scheme to T-DMB, it allows additional data transmission for disaster broadcasting and improves efficiency of data transmission in shadow region and indoor to mobile environment through watermarking spread code. From the simulation results, we confirm the proposed watermarking scheme affected on the existing T-DMB signal. Moreover, it was also confirmed that the system capacity increases as the power of additional watermarking signal rose. The results of the paper can be applied to wireless multimedia digital broadcasting systems.     

Redundant multicast routing in multilayer networks with shared risk resource groups: Complexity,models and algorithms

This paper presents a redundant multicast routing problem in multilayer networks that arises from large-scale distribution of realtime multicast data (e.g., Internet TV, videocasting, online games, stock quotes). Since these multicast services commonly operate in multilayer networks, the communications paths need to be robust against a single router or link failure as well as multiple such failures due to shared risk link groups (SRLGs). The main challenge of this multicast is to ensure the service availability and reliability using a path protection scheme, which is to find a redundant path that is SRLG-disjoint (diverse) from each working path. The objective of this problem is, therefore, to find two redundant multicast trees, each from one of the two redundant sources to every destination, at a minimum total communication cost whereas two paths from the two sources to every destination are guaranteed to be SRLG-diverse (i.e., links in the same risk group are disjoint). In this paper, we present two new mathematical programming models, edge-based and path-based, for the redundant multicast routing problem with SRLG-diverse constraints. Because the number of paths in path-based model grows exponentially with the network size, it is impossible to enumerate all possible paths in real life networks. We develop three approaches (probabilistic, non-dominated and nearly non-dominated) to generate potentially good paths that may be included in the path-based model. This study is motivated by emerging applications of internet-protocol TV service, and we evaluate the proposed approaches using real life network topologies. Our empirical results suggest that both models perform very well, and the nearly non-dominated path approach outperforms all other path generation approaches.     

mVoIP for P2P service based authentication system using AA authentication server

VoIP (Voice over Internet Protocol), which provides voice calls as well as additional services at cheaper prices than PSTN (Public Switched Telephone Network), is gaining ground over the latter, which had been the dominant telephone network in the past. This kind of a VoIP service is evolving into a dedicated mVoIP service for the smartphone which allows calls to be made at cheap prices using a WiFi network, as the number of smartphone users is skyrocketing as of late. While an increase in the user base is expected for mVoIP, a packet network is an open network which means anyone can easily gain access and so there can be various problems. To mitigate this, in this paper an authentication system is designed which has an AA (Attribute Authority) server added to VoIP in order to increase security and discriminate user access. In this paper a system for addressing security vulnerabilities from the increase in the use of VoIP services and providing differentiated services according to user access privileges is designed. This paper is organized as follows: Chapter 1 gives the introduction; Chapter 2 is on related research; Chapter 3 describes the proposed technique and system; Chapter 4 implements the system and analyzes its the performance; and Chapter 5 gives the conclusions.     

Development and evaluation of Zigbee node module for USN

This study aims at securing technology to develop a multisensor and complex position-tracking Zigbee node module for USN (ubiquitous sensor network). In a concrete way, it aims at developing military (invader detection module and system) and industrial (transformer-tracking and thermo-measurement module and system) Zigbee telecommunication node module, and developing wireless monitoring and tracking technology based on such modules. In addition, it aims at building up the foundation of interface test for various sensors (thermo sensors, pressure sensors, vibration sensors and vision sensors) and the foundation of a comprehensive interlocking device to which GIS (Geographic Information System) and GPS (Global Positioning System) were applied, for industrial devices are mostly installed in mountains. Moreover, it aims at developing a roaming-type variable Zigbee node module to the end that it stands against unfavorable conditions (extreme temperatures, dust, winds, electromagnetism, noise, etc.). In case such aims are achieved, Zigbee communications will not be limited to normal and stable conditions (home networks, building automation, etc.) but will be applied to the industrial field under noises and unfavorable conditions. In such a case, the application of Zigbee node modules is expected to be unlimited.     

Electrolyte optimization for a Li ion battery by charge profile analysis

Electrolyte design for Li ion batteries was approached by means of comparison of faradaic and non-faradaic currents. The faradaic current by the movement of Li⁺ ions was dependent on the composition of the electrolyte and was related to the battery capacity; the higher the capacity, the greater the current by the faradaic reaction. The open circuit potential of the electrode with a greater faradaic current decreased at a slower rate than that of the electrode with a smaller faradaic current. This analysis method can be used to prepare an optimal electrolyte of an actual Li ion battery, especially when developing batteries with excellent high-rate discharge capabilities and low temperature discharge properties.     

Plasma etching optimization of oxide/nitride/oxide interpolydielectric breakdown time in flash memory devices

The breakdown time of flash memory oxide/nitride/oxide (ONO) layer t_bd under positive constant current stressing has been found to be closely related to the cumulative extent of (over)etch of the tungsten silicide, control polysilicon, and ONO layers, i.e., Σ(ΛOE). An empirical first-order relation between t_bd and Σ(ΛOE) has been derived to facilitate the plasma etch recipe optimization. This has led to a four-fold increase in the average t_bd across a 200-mm wafer to 208 s. More importantly, the spread in t_bd has been tightened to ~5%, which is down from ~54%     

Microstructure and mechanical properties of Ti 45Al 5Nb + (0–0.5C) sheets

The possible application of gamma titanium aluminides in aerospace industry requires a detailed understanding of the microstructure–property relationship of sheets made from this material. This paper reports the mechanical properties of sheets up to 1000 °C, based on alloy concepts with high Nb concentrations and small additions of C. Sheets were manufactured by rolling powder metallurgical compacts with compositions Ti 45Al 5Nb and Ti 45Al 5Nb 0.5C. The microstructures of both sheets are “near gamma” and consist of γ-TiAl and ₂-Ti₃Al phases. The texture of both phases is very weak. The strengths levels are very high and that of the C-containing sheet exceeds that of the C-free material at RT by 200 MPa. The mechanical properties of Ti 45Al 5Nb are independent of the direction in the sheet, in the whole temperature range from RT to 1000 °C. However, for the C-containing sheet this is true only in the upper temperature range.     

陶瓷树脂内衬复合钢管介绍

采用树脂材料密暑离心铝热法制备陶瓷瓷钢管内衬层气孔，从而获得具有防护耐磨双重功能的复合管材。产品内衬层与钢管基体结合强度高，可在真空状态下长期运行，在高温下内初不鼓泡、不折皱。     

A simple nutrient-tolerance (NT) test for the characterization of the different types of oligocarbotolerant and oligocarbophile water bacteria from non-carbonated mineral water

Comparative determination of the specific growth kinetics in mineral water and low and higher concentrated broths at 20 degrees C of 25 selected Gram-negative bacteria isolated from natural non-carbonated mineral water yielded three groups: (1) facultative oligocarbotolerants--with faster growth in normal broth (In g l-1: yeast extract 2.5; casein peptone 5.0; glucose 1.0); (2) obligate oligocarbotolerants--with equal rates of growth in normal and 1:10 diluted broth; and (3) oligocarbophiles--with faster growth in 1:10 diluted broth and in mineral water. In addition, three nutrient types, 'eu-, meso- and oligotrophic' could be distinguished on the basis of full, weak and no growth in brain-heart infusion broth. Further characterization was made between slow and very slow growth types in 1:10 diluted broth. All 25 isolates were psychrotrophic with a minimum growth temperature below 0 degree C. The optimum and maximum temperatures of growth in 1:10 diluted broth, as determined in a temperature gradient incubator were between 20 and 32, and between 29 and 34 degrees C with an average of 26 and 31 degrees C, respectively. Based on these results a very simple nutrient-tolerance test was proposed. After inoculation of the three media, 1:10 diluted broth, normal broth and brain-heart infusion, it is only necessary to check whether or when visible turbidity occurs during 2 weeks incubation at 20 degrees C. This allows additional characterization of bacteria from natural mineral water, which are often difficult to identify, on the basis of growth characteristics in various types of nutrient media.     

A new 4H-SiC normally off lateral channel vertical JFET with extremely low power losses: source inserted double-gate structure with a supplementary highly doped region

A novel silicon carbide (SiC) normally off lateral channel vertical junction field-effect transistor (LC-VJFET), namely a source-inserted double-gate structure with a supplementary highly doped region (SHDR), was proposed for achieving extremely low power losses in high-power switching applications. The proposed architecture was based on the combination of an additional source electrode inserted between two adjacent surface gate electrodes and a unique SHDR in the vertical channel region. Two-dimensional numerical simulations for the static and resistive switching characteristics were performed to analyze and optimize the SiC LC-VJFET structures for this purpose. Based on the simulation results, the excellent performance of the proposed structure was compared with optimized conventional structures with regard to total power losses. Finally, the proposed structure showed about a 20% reduction in on-state loss (P/sub on/) compared to the conventional structures, due to the effective suppression of the JFET effect. Furthermore, the switching loss (P/sub sw/) of the proposed structure was found to be much lower than the results of the conventional structures, about a 75% /spl sim/ 95% reduction, by significantly reducing both input capacitance (C/sub iss/) and reverse transfer capacitance (C/sub rss/) of the device.