Preparation of core–shell type nanoparticles of diblock copolymers of poly(L‐lactide)/poly(ethylene glycol) and their characterization in vitro

Core–shell type nanoparticles of poly(L ‐lactide)/poly(ethylene glycol) (LE) diblock copolymer were prepared by a dialysis technique. Their size was confirmed as 40–70 nm using photon correlation spectroscopy. The ¹H‐NMR analysis confirmed the formation of core–shell type nanoparticles and drug loading. The particle size, drug loading, and drug release rate of the LE nanoparticles were slightly changed by the initial solvents that were used. The drug release behavior of LE core–shell type nanoparticles showed an initial burst during the first 12 h and then a sustained release until 100 h. The degradation behavior of LE block copolymer nanoparticles was divided into three phases: the initial rapid degradation phase, the stationary phase, and the rapid degradation phase until complete degradation. It was suggested that lidocaine release kinetics were predominantly governed by the diffusion mechanism in the initial burst phase and after that by both of the diffusion and degradation mechanisms. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2625–2634, 2002     

What influences patients' reports of three aspects of hospital services?

OBJECTIVES: Market forces make it essential to know what policies and actions influence patients' reports of hospital services. No studies have examined the role of patient characteristics, labor quality and staff characteristics, nonlabor resources, managerial practices, and employee attitudes within a single investigation. METHODS: The authors collected, simultaneously, data about labor, management and service processes, nonlabor resources, and employee attitudes on 117 nonintensive medical-surgical inpatient units in 17 hospitals selected from a pool of 69 institutions within a metropolitan area by a stratified random sample. Of the 2,595 patients who agreed to participate, 2,051 (79%) completed telephone interviews regarding their experiences with physical care, education, and pain management services within 26 days of hospital discharge. RESULTS: A significant amount of variation in patients' service reports was explained (adjusted R2 = 0.41 physical care, 0.35 pain management, 0.44 education). Although the predictors varied for each service report, patient characteristics, especially those related to personal resources, had a large explanatory role. A labor assignment pattern that could explain why earlier studies found labor quality and staff characteristics to have only a weak role in the prediction of patients' service reports was noted. CONCLUSIONS: The results related to patient characteristics may indicate opportunities to improve care by confronting service design strategies that erroneously rely on a homogeneous patient population. Measurement challenges identified by this study must be addressed to determine the role of labor quantity and staff characteristics.     

A DBR laser tunable by resistive heating

A distributed Bragg reflector (DBR) laser tuned by resistive heating is presented. It has a tuning range greater than 10 nm with only a 33% reduction in output power and a 10% increase in linewidth. Its behavior is easily modeled, agreeing well with simple theory     

Hydride Vapor Phase Epitaxy of GaN Thick Films by the Consecutive Deposition Process Using GaCl3

GaN buffer and main layers were grown by the conventional hydride vapor phase epitaxy technique using GaCl₃ consecutively. The deposited buffer layers were investigated by atomic force microscopy and X-ray analysis. To examine the behavior of the buffer layers at main layer growth temperature, heat treatment was conducted at 900°C. Based on the results of the buffer layer study, GaN thick films were grown at 1050°C. Optimum deposition conditions of buffer layer from the buffer and main layer studies generally coincided. On the φ scanning pattern, the GaN films grown on (0001) Al₂O₃ were single-crystalline. Band-edge emission dominated photoluminescence was observed at room temperature.     

A PLL clock generator with 5 to 10 MHz of lock range formicroprocessors

A microprocessor clock generator based on an analog phase-locked loop (PLL) is described for deskewing the internal logic control lock to an external system lock. This PLL is fully generated onto a 1.2-million-transistor microprocessor in 0.8-μm CMOS technology without the need for external components. It operates with a lock range from 5 to 110 MHz. The clock skew is less than 0.1 ns, with a peak-to-peak jitter of less than 0.3 ns for a 50-MHz system clock frequency     

Numerical modeling of near corona wire electrohydrodynamic flow in a wire-plate electrostatic precipitator

Numerical modelling of the flow velocity fields for the near corona wire electrohydrodynamic (EHD) flow was conducted. Solutions of the steady, two-dimensional momentum equations have been computed for a wire-plate type electrostatic precipitator (ESP). The equations were solved in the conservative finite-difference form on a fine uniform rectilinear grid of sufficient resolution to accurately capture the momentum boundary layers. The numerical procedure for the differential equations was used by SIMPLEST algorithm. The CFD code coupled with Poisson's electric field, ion transport equations and the momentum equation with electric body force, was used for the numerical simulation with the Chen-Kim k-epsiv turbulent model. The numerical results show that EHD secondary flow was clearly visible in the downstream regions of the corona wire despite the low Reynolds number for the electrode (Re _cw=12.4). Secondary flow vortices caused by the EHD increases with increasing discharge current or EHD number, hence pressure drop of ESP increases     

Phase Transformations in Dicalcium Silicate: II, TEM Studies of Crystallography, Microstructure, and Mechanisms

The crystallography, microstructures, and phase transformation mechanisms in dicalcium silicate (Ca₂SiO₄) were studied by TEM. Three types of superlattice structures were observed in the α'_L and β phases. Almost all β grains were twinned and strained. Symmetry-related domain structures inherited from previous high-temperature transformations were observed in β grains. Both the α→α'_H and α'_L→β transformations were considered to be ferroelastic, and spontaneous strains were calculated. In terms of the crystal structures, the major driving force for the β→γ transformation is proposed to be strains and cation charge repulsions in the β structure. This mechanism can be displacive, but it needs to overcome a comparatively high energy barrier.