Prediction of evaporation heat transfer coefficient and pressure drop of refrigerant mixtures

A study on the prediction of heat transfer coefficient (HTC) and pressure drop of refrigerant mixtures is reported. HTCs and pressure drops of prospective mixtures to replace R12 and R22 are predicted on the same cooling capacity basis. Results indicate that nucleate boiling is suppressed at qualities greater than 20.0% for all mixtures and evaporation becomes the main heat transfer mechanism. For the same capacity, some mixtures containing R32 and R152a show 8.0–10.0% increase in HTCs. Some mixtures with large volatility difference exhibit as much as 55.0% reduction compared with R12 and R22, caused by mass transfer resistance and property degradation due to mixing (32.0%) and reduced mass flow rates (23.0%). Other mixtures with moderate volatility difference exhibit 20.0–30.0% degradation due mainly to reduced mass flow rates. The overall impact of heat transfer degradation, however, is insignificant if major heat transfer resistance exists in the heat transfer fluid side (air system). If the resistance in the heat transfer fluid side is of the same order of magnitude as that on the refrigerant side (water system), considerable reduction in overall HTC of up to 20% is expected. A study of the effect of uncertainties in transport properties on heat transfer shows that transport properties of liquid affect heat transfer more than other properties. Uncertainty of 10.0% in transport properties causes a change of less than 6% in heat transfer prediction.     

Analysis of a 2(9) full factorial chemical library

Robotic synthesis is making possible the synthesis of large, systematically designed sets of compounds. We analyze a 512-compound set that is a 2(9) full factorial experimental design using a recursive partitioning algorithm, FIRM, and a high-dimension visualization tool, TempleMVV. These techniques are used to quickly and easily identify the main trends in the data set and also identify unusual observations. We show that analytical and visualization methods can be used synergistically to analyze a large, complex, high-dimensional data set. We also show that a fractional factorial design of 128 compounds would give essentially the same information.     

Taking the challenge of multiple access for third-generationcellular mobile radio systems-a European view

In Europe, the challenge of the design of third-generation cellular mobile radio systems has been taken numerous research and development activities in this field have been started. The authors try to give an overview of the European activities in this field. The article is organized in two parts. In the first part, the requirements for third-generation cellular mobile radio systems such as Universal Mobile Telecommunications System (UMTS) and Future Public Land Mobile Telecommunications System (FPLMTS), which has been named International Mobile Telecommunications after the year 2000 (IMT-2000) are presented concisely. Also, the importance and challenge of the multiple access design for such third-generation cellular mobile radio systems is explained. In the second part, numerous European research activities with focus on the multiple access design for third-generation cellular mobile radio systems are reviewed     

What influences patients' reports of three aspects of hospital services?

OBJECTIVES: Market forces make it essential to know what policies and actions influence patients' reports of hospital services. No studies have examined the role of patient characteristics, labor quality and staff characteristics, nonlabor resources, managerial practices, and employee attitudes within a single investigation. METHODS: The authors collected, simultaneously, data about labor, management and service processes, nonlabor resources, and employee attitudes on 117 nonintensive medical-surgical inpatient units in 17 hospitals selected from a pool of 69 institutions within a metropolitan area by a stratified random sample. Of the 2,595 patients who agreed to participate, 2,051 (79%) completed telephone interviews regarding their experiences with physical care, education, and pain management services within 26 days of hospital discharge. RESULTS: A significant amount of variation in patients' service reports was explained (adjusted R2 = 0.41 physical care, 0.35 pain management, 0.44 education). Although the predictors varied for each service report, patient characteristics, especially those related to personal resources, had a large explanatory role. A labor assignment pattern that could explain why earlier studies found labor quality and staff characteristics to have only a weak role in the prediction of patients' service reports was noted. CONCLUSIONS: The results related to patient characteristics may indicate opportunities to improve care by confronting service design strategies that erroneously rely on a homogeneous patient population. Measurement challenges identified by this study must be addressed to determine the role of labor quantity and staff characteristics.     

Energy release rates of crack kinking by boundary condition sensitivity analysis

The energy release rate, which is the total derivative of the energy with respect to crack length, is recognized as corresponding to the shape sensitivity analysis with the crack length change represented by the tangential component of design velocity. In this paper the sensitivity formula recently developed for a changing boundary condition has been further extended to cover crack kinking under mixed mode loading. Due to difficulty in defining the velocity field at the corner, the energy release rate at the onset of crack kinking is obtained by extrapolating the energy release rates for finite length kinked cracks. A rectangular plate with a single edge slant crack under uniform tension is taken as a numerical example. The multi-region technique in the numerical implementation of the boundary integral equation is adopted to consider the asymmetry of the problem. Excellent accuracy is observed as compared with reference analytic solutions.     

An efficient assumed strain element model with six DOF per node for geometrically non-linear shells

The present paper describes an assumed strain finite element model with six degrees of freedom per node designed for geometrically non-linear shell analysis. An important feature of the present paper is the discussion on the spurious kinematic modes and the assumed strain field in the geometrically non-linear setting. The kinematics of deformation is described by using vector components in contrast to the conventional formulation which requires the use of trigonometric functions of rotational angles. Accordingly, converged solutions can be obtained for load or displacement increments that are much larger than possible with the conventional formulation with rotational angles. In addition, a detailed study of the spurious kinematic modes and the choice of assumed strain field reveals that the same assumed strain field can be used for both geometrically linear and non-linear cases to alleviate element locking while maintaining kinematic stability. It is strongly recommended that the element models, described in the present paper, be used instead of the conventional shell element models that employ rotational angles.